Drawing No			Description		Date
	18000			Arrangement of Steam and Exhaust Pipes		13.5.35
	18001
	18002			Underslung Water Tank (small)		14.5.35
	18003			Ballast Weight		15.5.35
	18004			Arrangement and Details of Body Side doors		16.5.35
	18005			Underslung Water Tank (large)		17.5.35
	18006	A		Wrist pin assembly		17.5.35
		B		Wrist Pin washer		_
		C		Wrist Pin stud		_
		D		Wrist Pin washer		_
	18007			Arrangement and Detail of Frame		20.5.35
	18008			Arrangement of Draw Gear and Ballast Weight		21.5.35
	18009			Track Diagram for 6 whl 16'-8' WB		22.5.35
	18010			Frame Rear End Extension		23.5.35
	18011	A		Throttle Valve flange		22.5.35
				Square Flange (welding to pipe)		_
		F		Engine Isolating Valve flange		_
		G/H		Pipe Grid Flange		_
				Flange (continued from 16316)		_
		E		Exhaust Pipe flange		_
	18012	A		Lub Pump Body		25.5.35
		B		Lub Pump Cylinder		_
		C		Lub Pump Valve Chest		_
		D		Lub Pump Cover NOT USED		_
		E		Lever (lub shaft)		_
	18013	A		Lubricator Plunger		23.5.35
		B		Spring Washer (plunger)		_
		C		Bush (lub shaft)		_
		D		Lub Shaft		_
		E		Lever (lub shaft)		_
		F		Return Spring (plunger)		_
		G		Bracket on Weir Pump Arm NOT USED		_
		H		Sleeve (pump shaft)		_
	18014	A/B		Adjustable Stay for Weir Pump Control		23.5.35
		C		Stay Adjuster		_
		D		Stay Adjuster bush		_
		E		Thrust Washer Feed Pump Control Shaft		_
		F		Shut off Valve spindle		_
		G		Shut Off valve body		_
		H		Shut off valve gland		_
	18015	A		Spring Clamp and pivot combd		30.5.35
		B		Rear Axle Pivot Sleeve		_
		C		Arrangement of rear Axle pivot		_
		D		Rear Axle Spring clamp		_
	18016	A		Filler Seating Packing piece		31.5.35
		B		Packing Piece joint		_
	18017	A		Exhaust Pipe		14.6.35
		B/D		Steam Pipe		_
		C/E		Steam Pipe		_
	18018	A/B		Arrangement of Front Pivot Support Channel cleats		3.6.35
		C/D		Support channel top cleat		_
		E/F		Support channel bottom cleat		_
	18019			Drilling in Frames		7.6.35
	18020	A		Arrangement of Lubricator Check valve		6.6.35
		B		Lubricator Check valve body		_
		C		Lubricator Check valve cap, NOT USED		_
		D		Lubricator Cylinder		_
		E		Lubricator Check valve body		_
		F		Lubricator Cylinder		_
		G		Lubricator Check valve body		_
		H		Arrangement of Lubricator Check valve		_
	18021			Light Oil Tank		27.6.35
	18022	A/B		Tank Steady Bracket		6.6.35
		C		Main Oil Cock Stiffening plate, NOT REQUIRED		_
		D		Outlet Boss on Oil Service Tank		_
		E		Light Oil Tank Filter		_
		F		Oil Heating Coil		_
		H		Oil Outlet Pipe in Service tank		_
		G		Service Tank strainer		_
		J		Inlet Boss on Oil Service tank		_
	18023			Crankcase Oil Sump		6.6.35
	18024	A		Oil Sump Strainer (outer)		7.6.35
		B		Oil Sump Strainer (inner)		_
		C		Oil Strainer Cover		_
		D		Strainer Front Collar (inner)		_
		E		Strainer Outer Collar		_
		F		Balance Weight bolt		_
		G		Balance weight		_
	18025	A		Arrangement of Turntable Pivot		12.6.35
		B - E		Half Firegrate		_
	18026
	18027
	18028	A		Steam Pipe to Trailing flange
		B		Exhaust Pipe (vertical)		_
		C/D		Exhaust Pipe Suspension Bracket		_
	18029	A		Automatic Blower Valve flange		18.6.35
		B		Automatic Blower Valve body (bottom)		_
		C		Auto Blower Main Valve		_
		E		Auto Blower valve seat		_
		D		Automatic Blower valve body (top)		_
		F		Pressure Control Valve body		_
	18030	A		Arrangement of Engine Oil Seal		17.6.35
		B/C/D/E		Engine Oil Seal ring		_
		F		Oil Seal Ring Spring		_
		G		Altern to Bearing cap cover		_
		H		Altn to Crankcase		_
	18031	A/D		Steam Pipe Suspension bracket		17.6.35
		C		Boss to carry Therm. Pocket		_
		B		Steam Pipe (vertical)		_
	18032			Crankshaft		15.6.35
	18033	A		Control Box		19.6.35
		B		Swing Link Bracket(throttle)		_
		C		Reversing Shaft Bracket cover		_
		D		Direction Change lever (throttle)		_
	18034	A		Throttle Direction change bracket		20.6.35
		B/C		Bearing Support bracket RH		_
		D/E		Bearing Support bracket LH		_
		F		Chain Case Cover LH, NOT REQUIRED		_
		G		Chain Case Cover RH, NOT REQUIRED		_
	18035			Arrangement of 6/7ton Trailer		21.6.35
	18036			Arrangement of Bogie axle		21.6.35
	18037			Arrangement of 20ton Low Lwd trailer		21.6.35
	18038	A		Bearing Spindle (cardan shaft rear)		22.6.35
		B		Direction change Spindle (throttle)		_
		C		Reversing Rod End (rear)		_
		D		Spindle End cover		_
		E		Gear Wheel Spindle collar 9idler)		_
		F		Oil Filling elbow (rev. Gear box)		_
				Vacuum Conn rod		_
				Connecting link		_
	18039			Arrangement of 30 Ton Trailer		24.6.35
	18040	A		Wrist Pin		26.4.35
		B/C		Oil Deflecter		_
		D		Wrist pin Oil Scoop		_
		E		Nipple for Wrist Pin Lubrication		_
		F/G		Oil Box Bracket		_
		H		Oil Box		_
	18041	A		Steam Trap Bracket		24.6.35
		B		Steam Trap Support		_
		D		Pump Packing plate		_
		C/E/F		Headboard Stiffening channel		_
	18042	A		Arrangement of Pressure control		24.6.35
		B		Arrangemrnt of Automatic blower valve		_
	18043	A/B		Oil Service Pump Support bracket		26.7.35
		C		Oil Service Pump Support bracket		_
		D		Trunnion block		_
		E/F		Modified Weir Pump Side Lever for driving fuel oil service pump		_
	18044			Arrangement of Oil Box for Wrist pin Lubrication		25.6.35
	18045			Toolbox		25.6.35
	18046
	18047
	18048	A		Flanged Auto Klean Strainer		4.7.35
		B		Suction and delivery flange for bodan pump		_
		C		indicator Plate for 3 way cock		_
		D		Firedoor Top Protection plate		_
		E		Burner Air Dust		_
	18049			Arrangement of Funnel Boiler top and Superheater		8.7.35
	18050			Arrangement of Firing End plate and boiler cradle		2.7.35
	18051	A/B		Chain Case RH, NOT REQUIRED		9.7.35
		C/D		Chain Case LH, NOT REQUIRED		_
	18052			Arrangement of Pipes for Oil Burning equipment		1.11.35
	18053			Arrangement of Weir pump Oil Pump and Injector		19.7.35
	18054	A/B		Tarpaulin Rail Support		11.7.35
		C		Roof Bows		_
		D		Roof Bow bracket		_
		E		Tarpaulin Rail		_
	18055			Throttle Control rod		14.9.34
	18056			Control Shaft		17.6.35
	18057			Control Shaft		13.9.34
	18058			Control Shaft		19.6.33
	18059			Bow Bracket Backing strip		12.7.35
	18060			Tarpaulin Cover		12.7.35
	18061			Robot Feed Reglator		28.7.35
	18062			Weir Pump 4"x6"x7"		28.7.35
	18063
	18064
	18065	A		Rear Axle		30.7.35
		B		Front Axle		_
	18066	A		Spray Pipe		3.8.35
		B		Spray Pipe boss		_
		C		Spray Pipe end		_
		D/E		Spray Pipe Extension		_
	18067	A		Sprayer Operating bar		5.8.35
		B/C		Sprayer Operating Bar extension		_
		D		Nozzle Handle		_
		E/F		Support		_
		G		Operating Lever pin		_
		H		Operating Lever pin		_
		J/K		Spray Pipe clip		_
	18068	A/B/E/H		Sprayer End Shield		5.8.35
		C/F		Sprayer Centre Shield angle		_
		D/G		Sprayer End Shield angle		_
	18069			Sprayer Centre shield		6.8.35
	18070	A		Sprayer End Shield angle		6.8.35
		B		Shield Dowel Pin		_
		C		Shield Catch Pin		_
		D/E		Shield catch		_
	18071	A		Operating handle		6.8.35
		B		Operating Spindle		_
		C/F		Spray Pipe Clip block		_
		G		Speedometer Driving pulley		_
		D/E		Sprayer Centre Shield support		_
	18072			Modification to Superheater		22.8.35
	18073	A		Pump Packing Angle (RH)		9.8.35
		B		Pump Packing Angle (LH)		_
		E		Platform Handrail		_
		H		Front Spring packing		_
		C/D		Platform Bearer angle		_
		F/G		Sprayer Structure Side member		_
	18074			Superheater Tube Details		22.8.35
	18075	A		Loadweight (leading)		13.8.35
		B		Loadweight (trailing)		_
		C		Brake Weightshaft		_
	18076			14'-0' x 7'-4 1/2' Flat Platform		16.8.35
	18077	A		Front and Rear Wall Firebar		15.8.35
		B		Side Wall Firebar		_
	18078			Corner Firebar		16.5.35
	18079	A		Rear Glaze and Firebar Support		15.8.35
		C		Front Grate and Firebar Support		_
	18080	A		Side Frame RH		19.8.35
		B		Side Frame LH		_
	18081	A		Arrangement of Cranked Headboard		21.8.35
		B/C		Headboard Support angle		_
		D		Headboard Support bracket		_
		E		Headboard Extension		_
	18082	A		Side wall Firebar Support		16.8.35
		E/F		Special Firebrick for Side wall		_
		G/H		Support Bracket for drop Grate		_
		D		Side Break Wall support		_
		J/L/M		Bracket for Grate and Firebar		_
		K		1/2" dia Hinge pin		_
	18083	A		Altn to Tipping Plate 16550		20.8.35
		B/C		End Tipper Front Body Stop		_
		D		Oil Pump Gear with spindle		_
		E		Pump Driving Pinion		_
		F		Lubricator Shaft Bush		_
	18084			Train Heating boiler		27.8.35
	18085			Cab Roof Plates		25.8.35
		D		Cab Roof Slide packing		_
		E/J		Cab Roof Slide runner		_
		F		Cab Roof Slide NEVER USED		_
		G		Cab Roof Slide NEVER USED		_
		H/K		Transverse Packing piece, NEVER USED		_
	18086	A/E		Arrangement and Detail of Apron plate		23.8.35
		B		Funnel Damper boss		_
		C		Funnel Damper Stiffening plate		_
		D		Boiler top		_
	18087			Alterations to Grate		16.8.35
	18088			Arrangement of Steam Heating Plant in Compartment of Electric logo
	18089	A		Tar Spray Screen		24.8.35
		B		Filler Hole Extension		_
		C		Arrangement of Filler extension		_
		D		Rear Cover stay		_
		E		Cylinder Lubricator stay		_
		F/J		Rear Mudguard Stay LH		_
		G/H		Footplate Stay		_
	18090	A		Relief Valve		24.8.35
		B		Valve Spindle		_
		C		Relief valve Pillar		_
		D		Relief Valve cross bar		_
		E		Lubricator Shaft Washer		_
		F		Lubricator Plunger washer		_
	18091			Funnel Surround		26.8.35
	18092	A		Additional Drilling in Frame Stretcher plate		27.5.35
		B		RH Side Footplate		_
		C		Engine Stool		_
		D		Stretcher Stiffening angle		_
		E		Brake Shaft Lever		_
	18093	A		Arrangement of Damper and Funnel Top Surround		28.8.35
		B		Funnel Damper		_
		C		Funnel Top Surround		_
	18094
	18095			Arrangement and detail of frame		29.8.35
	18096	A/B		Platform Conrer angle		30.8.35
		C/D		Platform Rear Corner angle		_
		E/F		Headboard and Side angle		_
		G/H		Body Stanchion		_
		J/K		Side Bottom angle		_
		L		Headboard Stiffening channel		_
		M		Tailboard Stiffening channel		_
	18097	A		1 15/32" Blast Nozzle		30.8.35
		B		1 17/32" Blast Nozzle		_
		C		1 19/32" Blast Nozzle		_
		D		Funnel Aligning nozzle		_
	18098	A		Cab Roof Slide (front)		30.8.35
		B		Cab Roof Slide (rear)		_
		C		Cab Roof Slide Packing (front)		_
		D		Cab Door Slide packing (rear)		_
		E/H		Cab Door Slide Runner (front)		_
		F/G		Cab Door Slide runner (rear)		_
	18099	A		Tailboard Outside Stiffener		2.9.35
		B		Tailboard Centre stiffener		_
		C		Tailboard Centre Washer plate		_
		D		Tailboard Outside Washer plate		_
		E		Tailboard Centre Washer plate		_
		F/G		Front Mudguard Rear Stay		_
		H		Frame Pivot Channel Support		_
		J		Cross Chain Hook		_
	18100	A		Chain Lubricator body		3.9.35
		E/J		Lubricator Body packing		_
		F		Oil Dripper Pipe and Stop Cock		_
	18101	A/K		Radius Rod Socket		4.9.36
				Radius Rod		_
		J		Platform holding down bracket		_
	18102	A/B		Rear Tipping Pivot pin		4.9.35
		C/D		Platform Stiffening Plate		_
		E		Floor Support bracket		_
		G		Bolster Support channel		_
		F		Bolster Support channel cleat		_
		H		Support channel block		_
	18103
	18104
	18105
	18106	A		Turnatble Bolster		12.9.35
		B		Bolster Cover plate		_
		C		Bolster Turn plate		_
		D		Bolster Centre pin		_
		E		Bolster Plate rivet		_
	18107			Arrangement of Turntable Bolster		11.9.35
	18108			Arrangement of Chassis and platform		30.12.35
	18109
	18110	A		Bolster Support channel		10.9.35
		B		Spark Arrester		_
		C		Stoking Chute (top)		_
		D		Stoking Chute (btm)		_
		E		Stoking Chute Lower platform		_
	18111			Arrangement of Standard fixing for steam and exh. Pipes for geared car and rail bus		25.9.35
	18112
	18113	A		Driving Pulley (aux. Engine)		12.9.35
		B		Pad for Feedheater drum		_
		C		Feedheater Flanged connection		_
		D		Feedheater Flanged connection assembly		_
	18114			Arrangement of Flexible connections (mech. Lubricator to main frame)		16.9.35
	18115			20"-0 x 7"-0 3/4 " flat platform		17.9.35
	18116	A		Arrangement of Head B. Extension rail		20.9.35
		B		Headboard Extension rail		_
		C		Extension Rail Socket		_
		D		Extension Raill collar		_
	18117			Arrangement of Pulverised fuel tank waggon		23.9.35
	18118			Ashpan Arrangement		25.9.35
	18119			Arrangement of Coke carrying body		27.9.35
	18120			Smokebox Arrangement		1.10.35
	18121			Development of chimney, base plate		1.10.35
	18122			Low Loading Trailer with Well Platform		9.10.35
	18123			Sentinel Boiler Proposals
	18124	A		Crankcase Breather tube		16.10.35
		B		Crankcase Breather plug		_
		C		Oil Sump Syphon pipe top		_
		D		Oil Sump Syphon pipe internal		_
		E/H		Oil Sump Syphon pipe external		_
		F		Arrangement of oil Sump Syphon pipe		_
		G		Crankcase Breather baffle		_
	18125			Crankcase Back cover		22.10.33
	18126			DG4 Tipper on Pneumatics		16.10.35
	18127			Water Drum		18.10.35
	18128			Arrangement of Tractor Unit		21.10.36
	18129	A		Half Coupling for Vertice shaft		21.10.35
		C		Coupling Driving pin		_
		D		Flexible Coupling Bush		_
		B		Half Coupling for tarvel motor		_
		E		Flexible Coupling		_
	18130	A		Plate Support for Fire Bricks		9.9.35
		B		Alteration to Front Trunnion shafts		_
		C		Bracket for Plate Support		_
		D		Alteration to rear Trunnion shaft		_
		E/F		Rocker Operating rod		_
	18131	A		Crankcase Oil Strainer		22.10.35
		B		Gear Chamber Oil Strainer		_
		C		Crankcase Pump Chamber Oil Strainer		_
		D		Oil Strainer frame		_
	18132	A		Bunker Base Joint		23.10.35
		F		Joint for Safety Valve cover discharge tee		_
		G		Tank Filler base joint		_
				Manhole Door Joints		_
				Joint (for 6 bolt flange)		_
				Serrated Washer for release valve chest		_
		K		Locking Washer for pilot valve seat		_
	18133
	18134	A		Boiler Cleading Cover (top half)		13.7.37
		B		Boiler Cleading Cover (bottom half)		_
	18135	A		Boiler Top Cleading Cover		15.7.37
		B		Stop Valve Chest Shield Cover		_
	18136	A		Inlet Superheater Coil lagging cover		22.7.37
		B		Outlet Superheater coil lagging cover		_
	18137	A		Brake Valve Body		28.10.35
		B		Special Blast Pipe bend		_
	18138	A		Torque Bracket Channel (rear)		29.10.35
		B		Torque Bracket channel (front)		_
		C/D		Torque Bracket channel cleat (rear)		_
		E/F		Torque Bracket channel cleat (front)		_
		G/H		Torque Bracket Bracing stay		_
	18139			Arrangement and detail of frame		4.11.35
	18140			Arrangement and detail of Frame		4.11.35
	18141			Coachbuilders Drawing		31.10.35
	18142			Details for trainer car		1.11.35
	18143			Split Axle Spur wheel		4.11.35
	18144			DG4 Tipper Chassis on pneus		5.11.35
	18145	A		Tyre for Wheel 11112A/B		6.11.35
		B		Tyre for Wheel 11112A/B		_
	18146			Arrangement of Pulverised fuel tank waggon		12.11.35
	18147			no description given		18.9.44
	18148	A		Arrangement of Cross tube		15.11.35
		B		Cross Tube		_
		C		Cross tube ferrule		_
		D		Cross Tube flange		_
	18149	A		Wrist Pin		21.11.35
		B		Scraper Ring		_
	18150			Rear Axle Casing		21.11.35
	18151			7-4 1/2" Water Tube boiler		10.10.33
	18152			VR/27/C/335 Boiler		2.12.35
	18153			Arrangement of Controls, CANCELLED		21.11.35
	18154			Alteration to Superheater		27.11.35
	18155			Pressure Control valve		30.11.35
	18156	A		Jig Body, press body (thimble tubes)		28.11.35
		B		Thimble Tube Blank		_
		C		Removing Pin		_
		D		Handle		_
	18157	A		Rear Axle Layshaft Bevel		28.11.35
		B		Rear Axle Driving Shaft Bevel		_
	18158			2nd Tapering die		28.11.35
	18159
	18160	A		Firebox		5.12.35
		B		Boiler Shell		_
	18161	A/B		Frame Side Channel		6.12.35
		C		Frame Pivot channel		_
		D		Frame Inter. Cross channel		_
	18162	A/B		Frame Pivot Channel stay		11.12.35
		C/D		Frame cross stay cleat - top		_
		E		Pivot Channel spacer		_
		F/G		Turntable Pivot Channel cleat		_
		H/J		Turntable Side channel		_
	18163	A		Turntable Pivot Channel - front		13.12.35
		B		Turntable Pivot Channel - rear		_
		C		Turntable Ring Spacer		_
		D		Turntable Ring Distance piece		_
		E		Rear Cross Channel gusset plate		_
		F		Brake Equalising Rope guide tube		_
				Air Director pipe		_
				Trunnion Joint for air director pipe		_
	18164
	18165
	18166
	18167			Arrangement of Frame		14.1.36
	18168			Arrangement of Turntable		31.12.35
	18169			SD Tar Sprayer		16.12.35
	18170			Auxiliary Engine		16.12.35
	18171	A		Stop Valve Stuffing box		5.9.49
		B		Aux Stop Valve seat		_
		C		Revised Stop Valve arrangement		_
	18172			Arrangement of Throttle valve		18.12.35
				Arrangement of Throttle valve		_
				Arrangement of Throttle valve		_
				Arrangement of Throttle valve		_
	18173	A/B/C		Throttle Valve carrying bracket		11.12.35
		D		Throttle Valve carrying plate		_
		E		Throttle valve carrying plate		_
	18174			Control Lever		25.1.36
				Control Lever		_
	18175			Arrangement of Cardan shaft		4.3.36
	18175 2nd			Arrangement of Cardan shaft		4.3.36
	18176			no description given
	18177	A/B		Rear Axle Shaft		4.1.36
		C/D		Axle Shaft Oil Gland		_
		E/F		Rear Axle shaft		_
	18178			Arrangement of Tar sprayer		30.12.35
	18179			Boiler		2.1.36
	18180
	18181
	18182			Control Lever		27.1.36
	18183	A		Extn Plate for Combined staem and oil valve operating lever		3.1.36
		B		Operg Handle		_
		D		Tie Rod		_
		E		Friction washer		_
		F		Wrist pin		_
		C		Valve Rocker		_
		G		Link pin		_
		H		Tie Rod pin		_
	18184			Engine Safety sling		6.1.36
	18185	A		Arrangement of Cylinder Relief valve		31.12.35
		B		Cylinder Relief Valve chest		_
		C		Cylinder relief valve		_
		D		Cylinder Relief Valve spring		_
		E		Handhole Stiffening ring		_
	18186			Arrangement of Tar Sprayer		11.1.36
	18187
	18188			Arrangement of Timber trailer		13.1.36
	18189			Arrangement of Forecarriage		16.1.36
	18190			Arrangement of rear Carriage		23.1.36
	18191	A		Turntable Frame		17.1.36
		B		Turntable Ring support channel		_
		C		Turntable Pivot Support channel		_
	18192	A		Turntable Pivot Centre Support channel		18.1.36
		B		Timber Bolster Support channel		_
		C/D		Timber Bolster Support channel		_
		E		Front Bolster support		_
		H		Turntable Frame gusset plate		_
		F/G		Forecarriage Stop plate		_
		J		Turntable pivot pin		_
	18193	A		Turntable Ring (top)		14.1.36
		B		Turntable Ring (bottom)		_
		C		Pole Stirrup (front)		_
		D		Pole Stirrup (rear)		_
	18194			Spud Box		15.1.36
	18195			1 1/8" Cockburn Safety valve
	18196			Cab Roof Arrangement		10.2.36
	18197			Rear Axle		15.1.36
	18198	A		Reversing Spindle		16.1.35
		B		Reversing Screw Pin guide		_
		C		Reversing Screw Pin		_
		D/E		Oil Tank Stiffening angle		_
		F		Injector Carrying angle		_
		G		Carrying angle stay		_
	18199
	18200			Modification to Smoke Box Floor on Woolnough boiler		16.1.36
	18201			Arrangement of Tar Sprayer		17.1.36
	18202			Main Oil Tank		17.3.36
	18203			Arrangement of Oil Burning control gear on Front wing panel		26.1.36
	18204	A		Firebrick		21.1.36
		B		Firebrick		_
		D		Firebrick		_
		E		Firebrick		_
		C		Firebrick		_
		F		Firebrick		_
		G		Firebrick		_
	18205	A		Lub. Pump Body base bracket		16.1.36
		B		Lub. Pump Lever conn rod		_
		C/D		Lub Shaft bearing cover plate		_
		E		Jaw end		_
		F		Jaw end		_
		G		Lubricator Lever release pin		_
		H		Lubricator Lever release plunger		_
		J		Release Pin stop		_
		K		Cotter pin		_
	18206			General Arrangement of Lubricator (operated from weir feed pump), NOT USED		22.1.36
	18207	A/B		Rear Carriage Side channel		23.1.36
		D		Rear Carriage Rear Cross channel		_
		E		Rear Carriage Front Cross channel		_
		C		Rear Carriage Centre channel		_
		F		Torque Bracket Channel rear LH		_
		G		Torque Bracket Channel rear RH		_
	18208	A		Torque Bracket Channel Front LH		25.1.36
		B		Torque Bracket Channel Front RH		_
		C		Rear Carriage Gusset plate		_
		D		Rear Carriage Gusset plate		_
		E/J		Timber Bolster Support channel		_
		F		Cleat		_
		G		Pole Roller bracket		_
		H		Pole Roller eyebolt		_
	18209
	18210
	18211
	18212			Arrangement of Injectors etc		27.1.36
	18213			Rear Axle		27.1.36
	18214	A		Trailing Axle Spring		28.1.36
		B		Rear Axle Spring (leading)		_
		C		Trailer Spring (progressive type)		_
		D		Front Spring		_
	18215	A		Safety Chain Bracket		29.1.36
		B/C		Bolster Support		_
		D		Rear Bolster Packer		_
		E		Carriage Pole ferrule		_
		F		Rear Bolster support bracket		_
		G		Turntable Pivot Bosses		_
		H		Carriage Pole boss (bottom), NOT REQUIRED		_
						_
	18216			Countershaft		22.1.36
	18217	A		Engine Sprocket centre		23.1.36
		B		Suspension Link Top Ball seat		_
	18218			Spring Suspension link pin		29.1.36
		E		Speedometer Hook		_
		C/D		Front Brake-cam Lever		_
		F		Speedometer bracket		_
		G		Extension Operating gear stay		_
		H		Front Spring packing		_
	18219
	18220			Arrangement of Frame		24.1.36
	18221			Frame details		30.1.36
	18222	A		Trailing Buffer beam		30.1.36
		B		Leading Buffer beam		_
		C		Rear Gusset - top		_
		D		Rear Gusset - bottom		_
	18223			Arrangement of Bodan Pump		30.1.36
	18224	A		Front Gusset		30.1.36
		B		Front Gusset-brake hanger channel		_
		C		Centre Gusset-centre channel		_
		D/E		Cleats fixing engine suspension channel		_
		F		Cleat for brake hanger channels		_
	18225	A/B		Corner cleats		31.1.36
		C/D		Cleats for fixing inner solebars to rear		_
		H		Packing Piece for 18225C/D		_
		J		Packing piece for longitudinal angles		_
		E/F		Cleats - fixing outside portions of centre channel		_
		G		Cleats - fixing centre channel		_
		K/L		Front Cross channel corner cleat		_
		M/N		Centre Cross channel - outer gusset		_
	18226			Water tank Complete		3.2.36
	18227	A		Tank Filler		3.2.36
		B		Tank Internal Suction pipe		_
		C		Tank Filler joint		_
	18228	A/B		Cab Side Support channel		4.2.36
		C		Hose Box Stiffener		_
		D		Hose Box Stiffener		_
		E/F		Headlamp Bracket		_
	18229	A		Exhaust Branch		3.2.36
		B/E		Cardan Shaft Distance piece		_
		C/D		Drain Tank and Ring		_
	18230	A/B		Vacuum Cross Shaft Bracket outer		4.2.36
		C/D		Vacuum Cross Shaft Bracket Inner		_
		F		Sand valve Shaft Bracket		_
		G		Sanding Lever quadrant		_
		E		Vacuum Cross shaft		_
		H		Sand Pipe Extension		_
				U' Bolt (pump delivery)		_
	18231	A		Arrangement of Buffer and draw link		5.2.36
		B		Buffer Fxing angle		_
		C		Buffer Face plate		_
		D		Buffer plates		_
		E		Coupling link		_
	18232	A		1/2' BSF Nut
		B		5/8' BSF Castle nut		_
		C		1' BSF Nut		_
		D		1 1/8' BSF Nut		_
		E		1/2' BSF Bolt (special)		_
		F		5/8' Bolt		_
				1/2' BSF Bolts		_
		J		1/2' BSF Faced nut		_
	18233	A		Special Stud		15.9.28
		B		Driving plate		_
		C		Dog Coupling		_
		D		Adaptor		_
	18234	A		Arrangement of Tyre carrier boards and packing piece		7.2.36
		B		Tyre carrier strap		_
	18235			Arrangement of sanding Gear		27.2.36
	18236	A		Sand Box		10.2.36
		B/C		Sand Box lid		_
		D		Sanding Control Lever		_
		E		Sand valve shaft		_
		F		Cross shaft (oil pump gear)		_
	18237			Arrangement of Feed water heater head
	18238
	18239			Assembly of Front Panel		11.2.36
	18240			Arrangement of Cab Rear Panel		12.2.36
	18241			Arrangement of Cab Side Panel - RH side		17.2.36
	18242			Arrangement of Cab Side and Rear Plate		21.2.36
	18243	A		Suction Bend		11.2.36
		B		Delivery Bend		_
		C		Steam Flange		_
		D		Exhaust Flange		_
		E		Oil Valve stem		_
	18244			Arrangement and Detail of Frame		10.2.36
	18245			Arrangement and Detail of Frame
	18246			Arrangement of Tar Sprayer
	18247	A		Feed Pump Casing		23.3.36
		B		Feed Pump Casing cover		_
		C		Feed Pump Casing cover		_
	18248	A		Front Brake Cylinder bracket		18.2.36
		B		Front Brake rod		_
		C		Front Brake rod jaw		_
		D		Brake Rod Adjusting nut		_
		E		Brake Cam Lever pin		_
		F		Brake Lever Pin collar		_
	18249			Water Tank		18.2.36