Drawing No

Description

Date

17500
17501	A	Blast Nozzle	24.1.35
	B	Blast Nozzle Vane Stem	_
	C	Blast Nozzle Vane	_
	D/G	Blast Nozzle Operating lever	_
	E	Blast Nozzle Operating Shaft Bracket	_
	F	Blast Nozzle Operating shaft	_
17502		Steam Collector Trough	28.1.35
17503		Arrangement of Air casing frame	25.1.35
17504		Outs: Air Caings Sections	29.1.35
17505	A	Corner Angle (outside casing firing end)	31.1.35
	B	Corner Angle LHS	_
	C	Top Side Angle	_
	D/E	Side Longituinal	_
	F/G	Bottom Side angle	_
17506		Revised Superheater Coils	1.2.35
17507		Main Side Doors (outs:air casing)	5.2.35
17508	A	Ashpan Chute	5.2.35
	B	Ashpan Chute Door	_
	C	Hinge Bar for Ashpan chute	_
	D	Hinge for Ashpan Chute door	_
	E	Pin for Door Hinge	_
17509	A	Angle for Top Cover plate	6.2.35
	B	Top Cover plate	_
	C	Top Cover Plate Joint strap	_
	D	Side Firebar Bearer Locking Bracket	_
17510	A	Lever for Ashpan Door Hinge	8.2.35
	B	Lever for Ashpan Door control	_
	E	Lever for Ashpan Door Control	_
	D	Spring Retaining spindle	_
	E	Ashapn Door Operating lever	_
	F	Lever stop	_
	G/H	Control Shaft (ashpan door)	_
	J	Ashpan Door Locking spring	_
17511	A	Topside Panel	6.2.35
	C	Bottom Side Panel LHS	_
	D	Bottom Side Panel RHS	_
	B	Bott: Side Panel LH	_
17512	A	Bottom Side Panel RH	12.2.35
	B	Door catch Handle	_
	C	Door catch	_
	D	Door Catch Spindle	_
	E	Smokebox Door Support	_
17513		Arrangement of Firing End Doors
17514	A	Outside Air Casing Firing end Corner angle (R hand)	8.2.35
	B	Outside Air Casing smokebox end Corner angle (R hand)	_
	C/D	Outside Air Casing - Corner angle (smbox end)	_
	E/F	Top Side panel support	_
	G	Top Side angle (sbox end)	_
17515	A	End Plate	16.2.35
	B	Cross stay	_
	C	Bottom Cross Stay	_
	D/E	Extension plate	_
	F	Lower Extension plate	_
17516	A	Side Door	16.2.35
	B	Boss for Door Catch	_
	C	Door Catch Spindle	_
	D	Door Lug	_
	E/F	Main Side Door Sneck	_
17517	A	Top Side Panel	8.2.35
	B	Shouldered Rivet	_
	C	Shouldered Rivet	_
	D	Shouldered Rivet	_
	E/F	Frame Support	_
17518	A/B	Support stay end	8.2.35
	C	Lower Support (at water and drum)	_
	D/E	Bracket (air casing frame to firing end door)	_
	F/G	Top Support(firing end)	_
	H/J	Side Air Screen sneck	_
	K	Side Air Screen sneck rivet	_
	L/M	Side Air Screen sneck	_
	N	Side Screen Attachment peg	_
17519	A	Top Cross Stay	16.2.35
	B	Centre Cross stay	_
	C	Bottom Cross stay	_
	D	Frame Support	_
	E	Top Side angle stay	_
17520	A	Inner Corner angle LH	22.2.35
	B	Inner Corner angle RH	_
	C	Wing Plate LHS	_
	D	Wing Plate RHS	_
17521	A/G	Firing End Door	25.2.35
	B	Hinge for Firing End Door	_
	C	Stiffening Strip	_
	D	Distance Piece for Shouldered rivet	_
	E/F	Distance Piece for Shouldered rivet	_
17522	A	Water Drum Blow Down Operating Rod End	25.2.35
	B	Feedheater Blow Down Control Shaft	_
	C	Water Drum Blow Down Operating Rod	_
	D	Feedheater Blow Down Operating lever	_
	E	Feedheater Blow Down Control Shaft end	_
17523	A/B	Bracket for Feedheater Blow-down	25.2.35
	G/M	Control Rod	_
	H	Operating shaft	_
	C/D	Bracket for Feedheater blow-down - centre	_
	E/F	Bracket for Feedheater blow-down - firing end	_
	J/K/L	Bracket for Blast Control cross	_
17524
17525	A	Blast Control Cross shaft	26.2.35
	B	Blast Control Operating rod	_
	C	Special Locking handle	_
	D	Safety Valve Waste Pipe	_
	E	Soot Blower Cock Support	_
	F	Firedoor Balance weight stop	_
	G	Blast Pipe Blank Flange	_
17526	B	Steam Ejector Nozzle	12.3.35
	C/D	Intermediate Cones for Air Feed	_
	E	Air Inlet Pipe	_
	A/G/K	Blast Nozzle	_
	F	Air Inlet jets	_
	J	Water Drum Blow Down Nameplate	_
17527	A	Firebar (centre)	15.3.35
	B	Firebar (outside)	_
17528		Firebar (side)	9.3.35
17529	A to D	Firebrick Support	30.3.35
	E to H	Trunnion Support smokebox end	_
	J/R	Side Firebrick carriers	_
	L/M	Filling Bar and collar	_
	N	???? Firebox ????	_
	P	Cleats for 19528 J	_
	Q	Bolts for Filling bar	_
17530
17531
17532		Arrangement of Front Air Casings	27.3.35
17533	A	Superheater Anchor Bolt	28.3.35
	B	Superheater Anchor Bolt distance bar	_
	D	Door Lining washer	_
	F	Joint Plate (vert top) front air casings	_
	C	Superheater Support (inner)	_
	E	Front Air Casing support bracket	_
17534		Arrangement of Blast Pipe Smokebox and Chimney	28.3.35
17535	A	Filling bar and Collar
	B	Centre Firebar	_
	C	Firebar Centre angle	_
	D/E	Side Make-up piece	_
	F	Centre Firebar support	_
17536	A	Firedoor Protection plate
	B	Firedoor Lagging sheet	_
		Firedoor Ferrules	_
	F	Firebox Assembly	_
17537	A/B	Lagging Retaining plate	26.4.35
	C/D	Lagging Retaining plates	_
	E/F	Lagging Reatining plates	_
	G	Protector plate bolt	_
	H/J	SHR Side Door smbox end	_
	K/L	SHR Side Door centre	_
	M/N	SHR Side door Firing end	_
17538	A	Universal Joint
		Universal Joint jaw	_
	D	Universal Joint pin	_
	F	Blower valve Operating Rod bracket	_
	J	Operating Rod Bracket Stiffener	_
	G	Universal Joint Centre block	_
	H	Blower Valve Operating rod	_
17539	A	Tube Expander ratchet
	B	Tube Expander Ratchet Wheel	_
	D	Ratchet Cover plate	_
	C	Ratchet Pawl	_
	E	Expander Taper pin	_
	F	Ratchet Body	_
17540		Water Drum, NEVER USED	26.11.35
17541
17542		Layout of Tube Bank	6.2.36
17543
to		All Files between these numbers appear to be missing
17550
17551	A	Connection for Filler ????	31.1.36
	B	Water Gauge Top Seating	_
	C	Water Gauge ????????, CANCELLED	_
	F	Cleaning door	_
	D	Water Gauge Bottom ???? Smokebox end	_
	E	Check Valve branch	_
17552		Superheater Tubes	14.2.34
17553
17554	A	Superheater Box (to steam drum)	11.2.36
	B/E	Superheater Box (to main stop valve)	_
	F	Superheater Box strap	_
	G	Packing Strip (for superheater box)	_
	D	Steam Pipe Flange	_
17555		General Arrangement of 3 Drum Boiler	13.5.36
17556		Detailed Arrangement of Closer Castings	17.2.36
17557		Double Safety Valve base casting	3.3.36
17558
17559		Arrangement of Firing End Fittings	26.5.36
17560	A	Exhaust Junction pipe
		Blast Nozzle	_
	F/G	Boiler Foot Stools	_
17561	A	Boiler Foot Bolt Plate	23.2.36
	G	Boiler Foot bolt (s'box)	_
	H	Boiler Foot bolt (firing end)	_
	J	Safety Valve Lever	_
	M/N	Steam Co???ctor Plate and ANGLE	_
	D/P	Locking plate	_
	K/L	Feed Tray Support	_
17562		Detail of Smoke box
17563		Assembly of Smokebox End casings	3.3.36
17564		Arrangement Smokebox End Casing Fairing	4.3.36
17565		Arrangement Boiler support (smokebox end)	10.3.36
17566		SHR Door details	11.3.36
17567		Arrangement of Smokebox, Blast Nozzles and chimneys	11.3.36
17568		Arrangement of S'heater Side Doors and Side Closers	6.3.36
17569		Arrangement of Firing End plate and Boiler support	13.3.36
17570		Steam ???? Top fittings and casings
17571
17572		Arrangement of Safety Valves	1.4.36
17573		Safety Valve cover
17574		Arrangement of Firing end screen	4.5.36
17575		Arrangement of Super????? Top ?corner?
17576		Combustion Chamber Arrangement	6.4.36
17577		Extra Drilling in Steam drum	16.4.36
17578
17579		Water Drum Cleading
17580		Layout and Detail of bottom closer	23.4.36
17581
17582	A	Fusible Plug	24.4.36
	B	Feedwater Regulator Blank Flange	_
	C	Water Gauge Bottom Seating plug	_
	G	3/4" Burner Valve spindle	_
	D	Arrangement of Check Valve ratchet	_
	E/F	Division Wall support	_
17583		Arrangement of Pressure Gauge Support bracket
17584	A	Steam Drum Cleading (s'box end)	19.5.36
	C	Steam Drum Cleading	_
	B	Steam Drum Cleading	_
	D	Steam Drum cleading	_
17585		Isolating plate	21.5.36
17586		Arrangement of Draught Regulator
17587	A-E	Superheater Clips (outer)	8.7.36
	J/H	Joint Cover Channel	_
	F/G	Superheater Clip(inner)	_
	K	Joint Cover Nut	_
17588		General Arrangement of 3 Drum Boiler	28.1.37
17589		Steam Drum	27.7.36
17589 revised		Steam Drum	27.7.36
17589 revised 2		Steam Drum	27.7.36
17590		Water Drum (LH&RH)	27.7.36
17590 Revised		Water Drum (LH & RH)	27.7.36
17591
17592	A	Arrangement of Boiler Foot Anchorage	7.9.36
		Spring ??????	_
	C	Boiler Foot Pad	_
		Boiler Foot Pad	_
17593
17594		????? Of Top Closers	16.9.36
17595	A/B	Superheater Clips - Long coil	19.9.36
	C/D	Superheater Clips - intermediate coil	_
	F	Superheater Clip Short clip	_
	G	Blower Stop Valve Support bracket	_
	H	Steam Stand Support bracket	_
17596	A	Superheater Box Steam Pipe (to main stop valve)	21.9.36
	B	Connection for Filler plug	_
	C	Water Gauge ??? Bottom L.hand	_
	D	Water Gauge Seating Top LH	_
	E	Water gauge Seating Bottom RH	_
	F	Water ????????????????????????	_
17597	AorF	Check Valve elbow
	D	Ash Cleaning Door ring	_
	B/C	Ash Cleaning door	_
	E	Firedoor	_
17598		Arrangement of Superheater door	29.9.36
17599	A	Feedheater Regulator bracket	4.11.36
	C	Furnace Door back plate	_
	B	Feed Water Regulator support bracket	_
	E/F	Side Baffle Firedoor frame	_
	D	Top Baffle Firedoor frame	_
17600		???om Closer	2.10.36
	C	Bottom Closer ??TT-strap	_
	D/E	Joint cover	_
17601	A	Arrangement of Ash Chutes	30.8.34
	B	Door Operating Lever	_
	C/D	Door Operating handle	_
	E/F	Door handle catch	_
	G	Door Lever pin	_
17602	A	Reversing Shaft Bracket	24.8.34
	B	Reversing Shaft Bracket	_
	C	Bracket (throttle gear)	_
	D	Bracket support plate	_
		Throttle Cross shaft	_
17603	A	Arrangement of Firebrick lining	27.8.34
	B	Bottom Brick	_
	C	Special Bottom brick	_
	D	Inlet brick	_
17604	A	Arrangement of Frame	29.8.34
	B	Tank Drain boss	_
	C	Tailboard Hinge bar	_
	D	Engine Suspension channel plate	_
17605		Arrangement of drayton regulator throttle control and automatic blower	14.9.34
17606	A	Arrangement of 21'-0' x 7'-0 3/4' platform	27.8.34
	B	Arrangement of 21'-0' x 7'-0 3/4' platform and body	_
17607	A/F	Alteration to Combustion chamber	28.8.34
	B	Valve Stuffing box	_
	C	Valve gland nut	_
	D	Y' piece	_
	E	Burner valve	_
17608
17609		Arrangement of Cab Canopy and Bunkers	15.3.32
17610		Detail of Apron Plate and Door	29.8.34
17611		Arrangement of Turntable Bolster	29.8.34
17612	A	Turntable Bolster	29.8.34
	B	Bolster Cover plate	_
	C	Bolster Turntable ring (top)	_
	D	Bolster Turntable ring (bottom)	_
17613	A/B/K/L	Bolster Support	29.8.34
	C	Pivot Cross Channel	_
	D	Bolster End 'D' link	_
	G/H	Bolster Cleats	_
	E/F/M/N	Pivot Bearer cleats	_
	J	Bolster Support plate	_
17614	A/B	Platform Stiffening plate	30.8.34
	C	Bolster stanchion	_
	D	Bolster Pivot bearers	_
17615		Suspension Link	30.8.34
	B	Lower Engine Suspension ball seat	_
	C	Upper Engine Suspension ball seat	_
	D	Suspension Ball cover	_
	E	Dust Cover	_
	F	Dust Cover	_
	H	Suspension support plate	_
17616		Water Tank	29.8.34
17617	A	Altn to Frame 16766	30.8.34
	B/D	Canopy Sign Bracket	_
	C	Bodyside Nameboard Bracket	_
17618		30" dia solid wheel	31.8.34
17619	A	Tyre carrier Rear half	1.9.34
	B	Tyre Carrier Front half	_
	C/D	Strengthening plate	_
	E	Carrier stay bolt	_
	F	Carrier stay boss	_
	G	Oil and Gauge nipple	_
17620	A	Arrangement of Special Drawbar bracket	31.8.34
	B	Rear Drawbar bracket	_
	C/D	Diagonal stay	_
	E	Drawbar bracket boss	_
17621		Arrangement and Funnel and Boiler top	30.8.34
17622		Arrangement and Detail of Cab Tropical	1.9.34
17623		Arrangement of Wheels and Axles	1.9.34
17624		16 ton trailer drawbar	1.9.34
17625		Double Bumper bar bracket	6.8.34
17626		Arrangement of Boiler and Mountings
17627	A	Cab Corner post cleat	3.9.34
	B/C	Side Louvre stay	_
	D	Side louvre hinge	_
	E	Side Lourve Stay Bracket	_
	F	Side Lourve hinge (female)	_
	G	Side Lourve hinge (male)	_
	H	Hinge pin	_
	J	Hinge Pin Catch	_
17628	A	Canopy Sun Protector	5.9.34
	B/D	Arrangement Boiler Cleaning pipe	_
	C	Boiler Flexible cleaning pipe	_
17629	A	Arrangement of Sign	4.9.34
	B	Arrangement of Reversible sign	_
17630		Arrangement of Frame	7.9.34
17631	A	Front Stiffener cleat	_
	B	Angle Cleat	_
	C/D	Frontand rear Pulley Bracket support	_
	E	Frame rear Gusset	_
	F	Front Bearer angle cleat	_
	G/L/K/M	Front Platform supports	_
	H	Rear Cross channel	_
	J	Turntable Bottom ring support	_
17632	A	Arrangement of Turntable	6.9.34
	B/C	Turntable side channel	_
	D	Turntable pivot cross channel	_
	E	Turntable Rear Cross channel	_
17633	A	Turntable Front Cross channel	6.9.34
	B	Turntable Bottom gusset plate	_
	C/D	Bottom Turntbale Ring support	_
	E/F	Top Turntable Ring Support	_
	G	Turntable ring top	_
	H	Turntable pug bottom	_
17634	A	Turntable Pivot Channel stiffener	6.9.34
	B	Turntable Front cleat	_
	C/D	Rear Trunnion Bracket (inside)	_
	E/F	Rear Axle Trunnion bracket	_
	G	Drawbar bracket	_
	H	Drawbar Eye bolt	_
17635	A	Rear Drawbar Bracket	8.9.34
	B	Brake Rope tube	_
	C	Drawbar pin	_
	D	Bracket Rope link	_
	E	Rope Pulley shackle	_
	F	Drawbar end	_
17636
17637
17638		Fiitted Bolt	4.9.34
	F	Brake hanger	_
	G	Brake Hanger boss	_
	H	Rear Brake Compression rod	_
	J/K	Brake beam	_
17639	A/B	Rear and Middle Canopy Bow gusset	5.9.34
	C	Front canopy Bow gusset	_
	G	Rear Bogie Suspension bracket packing piece	_
	H/J	Headboard Side angle	_
	D	Cab Rear top gusset	_
	E/F	Cab Back waistline gusset	_
	K/L	Side Rail angle	_
17640		Details of frame drilling	4.9.34
17641	A	Arrangement of Turntable	5.9.34
	B/C	Turntable Side channel	_
	D	Turntable front stay	_
	E	Turntable Front Cross channel	_
	F	Front Cross channel cleat	_
17642	A	Lever (throttle gear)	4.9.34
	B	Bracket (throttle gear)	_
	C	Throttle Cross shaft bracket	_
	D	Throttle cross shaft end (rear)	_
		Universal coupling flange	_
	F/G/H	Universal coupling flange	_
17643	A	Main Frame (ordering sketch)	5.9.34
	B	Mid Frame Stretcher (ordering sketch)	_
	C	Engine Stretcher (ordering sketch)	_
	D	Buffer Beam (ordering sketch)	_
	E	Boiler seat plate (ordering sketch)	_
	F	Brake Bracket (ordering sketch)	_
17644	A	Exhaust Branch carrier	3.10.34
	B/K	Steam Ball Socket Carrier (front)	_
	C	Steam Ball Socket Carrier (rear)	_
	D/E	Exhaust Pipe Sling clip	_
	F/G	Exhaust Pipe Sling Carrier	_
	H	Steam Pipe Sling clip	_
	J	Steam Pipe Sling carrier	_
17645	A/B	Side channels	6.1.34
	C/G/D/H	Floor Support bracket	_
	E/F	Rear Spring Channel	_
	J/K	Side Channel Truss	_
17646		Arrangement of Steam and Exhaust pipes	14.3.36
17647	A/B	Platform Front Corner angle	7.9.34
	C	Stud plate	_
	D	Stud plate	_
	E	Spare Tyre stud	_
17648
17649	A	Trailer Buffer beam	8.5.34
	B	Leading Buffer beam	_
	C/D	Brake bracket Beam cleat	_
	E	Buffer Beam angle	_
	F	Buffing plate	_
	G/H	Buffing block	_
17650	A/B	Arrangement of Rear Mudguards	10.9.34
		Side rail angles	_
	E	Side rail angle	_
17651	A/B	Funnel protection plate	11.9.34
		Special Lubricator Nipple	_
		Special Axle nut Locking bar	_
	C	Protection plate support	_
	D	Lubricator driving crank	_
	J	Locking bar pin	_
	K	Knuckle housing(axle end)	_
17652	A	Boiler Seat plate	11.5.34
	B	Boiler Seat Plate Rear cleat	_
	D	Distance piece	_
	C	Arrangement of Buffing and drawgear	_
17653	A	Arrangement of ????board	12.9.34
	B	Headboard Protection plate	_
	C/D	Headboard support	_
	E	Extension Side ctach	_
	F/G	Extension Front End Protection	_
17654	A	Stanchion socket clip	17.9.34
	B/H	Stanchion socket	_
	E	Control bracket	_
	C/D	Arrangement of Stanchion socket	_
	F	Control valve Body bracket	_
	G	Control Valve body	_
17655	A	Body Extension Support socket	13.9.34
	B	Body Extension Support socket	_
	E/F	Side Extension Centre Protection plate	_
	C	Tailboard Extension Protection plate	_
	D	Side Extension Rear End Protection plate	_
	H	Arrangement of Socketed tailboard	_
17656	A/B	Side Rail Cover plate	13.9.34
	C	Side rail Stiffeners	_
		Platform Corner plates	_
	H	Platform Corner gusset	_
17657	A/B	Ring and Shackle	13.9.34
	C	Front Floor Protection angle	_
	D	Rear Cross Bearer cover plate	_
	E/F	Side Rail Bottom cope iron	_
	G/H	Number Plate of case	_
	J	Number Plate bracket	_
17658		Control Shaft	13.9.34
		Control Shaft	_
		Throttle Control Rod	_
		Control rod end	_
		Overhung pin	_
17659		Arrangement of Bodyside Removable namenoards	14.9.34
17660	A/B	Arrangement of Front Mudguard	17.3.34
	C	Rear Tyre Carrier stay	_
	D	Front Tyre carrier stay	_
	F/G	Arrangement of Rear Mudguard	_
	E/J	Rear Mudguard Centre block	_
	H	Rear Mudguard stay	_
17661
17662	A	Tyre Pump Stay Plate	18.9.34
	B	Tyre Pump Stay Packing	_
	C	Tyre Pump Stay	_
	D	Detail of Extra Drilling in Engine Suspension bracket	_
	E/F	Steam and Oil Valve lugs	_
	G	Special Coupling nipple	_
	H	Inlet Cone	_
	J	Burner support	_
17663	A	Exhaust Pipe (front engine)
	B	Exhaust Pipe	_
	C	Exhaust Pipe (hind engine)	_
	D	Main Exhaust Pipe	_
	E	main Steam Pipe to front engine	_
	F	Main Steam Pipe to hind engine	_
	G	Steam Pipe from Throttle (hind engine)	_
	H	Steam, Pipe from throttle (front engine)	_
17664	A	Oil Burner body	20.9.34
	B	Burner body Adapter	_
17665		Arrangement and Detail of steel tipping body	20.9.34
17666		Oil Burner arrangement	21.9.34
17667	A/B	Roof Weather angle	19.9.34
		Handrail	_
	C	Roof Weather Angle	_
	F	Cab Door Curtain rod	_
	G	Cab Door Curtain (complete)	_
17668		Arrangement of Trailer Frame	18.7.34
17669	A	Steam and Oil Valve body
	B	Steam and Oil Valve flange	_
	C/D	Steam and Oil Valve Connecting tubes	_
	E	Arrangement of valve Connection to flange	_
17670	A	Pipe flange	21.9.34
	B	Steam Pipe (ball to ball)	_
	E	Boss (exhaust pipe drain)	_
	F	Steam Pipe to Throttle (throttle end)	_
	C	Special Lubricator Nipple	_
	D	Check Valve body special	_
	G	Steam Pipe to Throttle (boiler end)	_
		Joint washer	_
17671		Arrangement of Controls at Architectuated bogie	22.9.34
17672
17673		Arrangement and detail of frame	27.9.34
17674	A/B	Compensating Lever (brake gear)	26.9.34
	D	Shunters Hand Rail	_
	E	Curtain stud	_
	C	Compensating Lever Coupling link	_
	F/G	Brake beam Bosses	_
	H	1/2' - 1/2'm elbow	_
17675		Arrangement of Brake gear	26.9.34
17676	A/J	Control Gland nut	26.9.34
	B/K	Control Adaptor	_
	E	Control Wire end	_
	F	Control Adjuster Holder	_
	C	Control Wire end	_
	D	Control Spindle	_
	G	Control Adjuster	_
	H	Control Adjuster Holder end, NOT USED	_
17677
17678	A	Burner Housing Baffle plate	28.5.34
	B	Burner Housing Gauze	_
	C	Baffle Plate Lug	_
	D	Engine Safety Sling	_
	E	3/8' - 1 1/2' adaptor	_
	F	1/8'-3/8' female adaptor	_
	G	Burner housing gauze	_
	H	Burner Housing Baffle plate	_
17679		Arrangement of tropical roof	28.9.34
17680		Arrangement of Tool Box	29.9.34
17681		Arrangement of Suspension link	16.5.35
17682	A	Oven for Driver's Food	1.10.34
	J	Oven Heating Coil	_
		Special Coupling Nipple (high pressure)	_
	L	Door Fastener	_
		Special Coupling nipple(long)	_
17683	A	Control Rod Roller guide	1.10.34
	B	Suspension Dust cover	_
17684	A	Rear Axle	1.10.34
	B	Front Axle	_
	C	11tooth sprocket	_
17685	A	Throttle Cross Shaft Lever	1.10.34
	D/E	Throttle Cross Shaft Lever	_
	F	Throttle Cross Shaft Lever	_
	B	Control Rod end	_
	C/K	Control Rod end pin	_
	G	Universal Coupling jaw	_
		Control Rod - trailing End - centre	_
17686	A	Control Rod Roller	2.10.34
	B	Control Rod Roller	_
	C	Roller Pin	_
	D	Roller Pin	_
	H	Pipe Clip	_
	F	Bracket for Lubricator Pipe	_
	E	Connecting Link End	_
	G	Adaptor for Mech. Lubricator	_
17687		Milk Transport by Road and Rail
17688		Control Cross-over shaft	9.10.34
		Control Cross-over shaft	_
		Control Cross-over shaft	_
	F	Control Cross-over shaft	_
17689		Drilling in Cross Member for Control Rods	5.10.34
17690		Drilling in Cross Member for Control Rods	5.10.34
17691		Development of Boiler 16442 shell	4.10.34
17692	A	30" Tyred Steel wheel	4.10.34
	B	Method of Retyring 30" wheels 7144	_
17693		Arrangement Speedometer drive	6.10.34
17694	A	Arrangement of Cab Side Curtains	8.10.34
	B/C	Cab Side curtains	_
	D	Curtain rod	_
	E	Curtain ring	_
17695
17696		Arrangement of Control gear (front end)	27.4.35
17697		Arrangement of Control Gear (rear end)	1.5.35
17698		Arrangement and Detail of Frame	9.10.34
17699		Special Gear Box Back Cover	10.10.34
17700		Power Take-off casing	17.10.34
17701	A	Stoker Conveyor Spindle	10.10.34
	B	End Cover gland	_
	C	Union Connection (for cleaning pipe)	_
	D	Nozzle (for cleaning pipe)	_
	E	Union (for cleaning pipe)	_
	F	Universal Connection spring	_
17702	A	Centre Box Sprocket	9.10.34
	B	Centre Box Cover	_
	C	Reversing Indicator	_
	D	Reversing Indicator Link	_
	E	Brake Return Spring hook	_
	F	Return Spring adjuster	_
17703	A	Brake Gear Return Spring	10.10.34
	B	Return Spring Bracket	_
	C		_
	D	Reversing Sprocket	_
	E	Reversing Indicator nameplate	_
17704	A	Engine Casing	9.10.34
	B/C	Casing Door (to engine)	_
	D	Casing Door (to chain lubricator)	_
		Casing Door Stop	_
17705	A	3'-1' Dia wheel	23.10.34
	A	Tyre profile	_
17706		Arrangement Wheels and Axle	11.10.34
17707	A	Air Brake Cylinder bracket	11.10.34
	B	Air Brake Inside lever	_
	C	Tipping Pivot Cross shaft	_
	D	Air Brake Outside lever	_
	E	Clutch Operating fork	_
	F	Clutch Operating fork shaft	_
	G	Clucth Operating Fork pin	_
17708	A	Side Frame RH	9.10.34
	B	Side Frame LH	_
	C	Frame Stretcher Plate	_
17709	A	Trailing Headstock	12.10.34
	B	Leading Headstock	_
	C	Footplate	_
	D/E	Drawgear bracket CANCELLED	_
	F	Drawgear Distance piece	_
	G	Front Drawgear bracket	_
17710	A	Derailment Beam Gusset (front)	11.10.34
	B/C	Derailment Beam Gusset (front)	_
	D/E	Derailment Beam Gusset angle (front)	_
	F	Gusset Back Plate (front)	_
	G/H	Derailment beam	_
	J/K	Derailment Beam Gusset angle (rear)	_
	L	Gusset Back Plate (rear)	_
	M/N	Beam Stiffening Plate and Angle	_
17711		Drilling in Footplate at Articulated Bogie	12.10.34
17712		Arrangement of Rocking grate	30.10.34
17713	A	Arrangement of Air deflecter	2.11.34
	B/C	Air delfecter plate	_
	D	Deflecter Plate clamp	_
	E	Deflecter plate bar	_
	F/G	Deflecter Operating rod	_
17714		Detail Arrangement of Reversing gear	15.10.34
17714 2nd neg		Detail Arrangement of Reversing Gear	15.10.34
17715	A/B	Trailing Headstock cleats	2.11.34
	C/D	Leading headstock cleat	_
	E/F	Leading Headstock Inner cleat CANCELLED	_
	G	Buffer Angle CANCELLED	_
	H/J	Trailing Headstock Buffer angle - top	_
	K/L	Headstock Buffer angle	_
	M	Seat Plate Headstock angle	_
	N	Seat Plate side angle	_
17716	A	Trailing Headstock Top angle	16.10.34
	B	Foot Plate Headstock angle	_
	C	Footplate side angle	_
	D	Footplate Bracket	_
	E	Seat plate	_
	F	Trailing Headstock Cleat, packing piece	_
	G	Leading Headstock cleat packing piece - RH	_
	H		_
17717		Cab Roof Plates	17.10.34
	D	Cab Roof Slide Runner	_
	E	Cab Roof Slide packing	_
	F	Cab Roof Butt strap	_
	G	Cab Roof angle - front	_
17718		Axle (driving)	17.10.34
17719		Sketch of Proposed Buffer and Drawgear	17.10.34
17719 B		Sketch of Proposed Buffer and Drawgear	24.10.34
17720	A/B	Control Column Index plate	18.10.34
	C	Reversing Wheel Instruction plate	_
	D	Reversing Wheel rotation disc	_
	E	Lub valve nameplate	_
	F	Whistle valve nameplate	_
	H	Boiler Cleaning valve nameplate	_
	J	Vac. Brake valve nameplate	_
	G	Injector valve nameplate	_
	K	Vacuum gauge nameplate	_
17721	A	Cab Roof Angle - rear	18.10.34
	B/C	Cab Side Plate - rear	_
	D	Trailing Weather board	_
	E/F	Cab Side Plate Beading	_
	G/H	Cab Side Plate Bottom angle	_
	J/K	Weather Board angle	_
	L	Weather Board packing	_
17722	A	Gland Cover (power take off)	18.10.34
	B	Power Take-off Spur Wheel	_
	C	Power Take-off Odler spur wheel	_
	D	Power Take-off shaft	_
17723	A	Arrangement of Front Control Box	18.10.34
	B	Arrangement of Control Box (rear)	_
17724	A	Wording for Instruction plate	19.10.34
	B	Valve Setting Indicator plate	_
17725	A	Front Stretcher Angle cleat	18.10.34
	B/C	Side Strecher Angle cleat	_
	D	RH Side Footplate	_
	E	LH Side Footplate	_
17726		Arrangement of Frame	15.5.43
17727	A	Leading Weather Board	19.10.34
	B/C	Cab Side Plate - front	_
	D/E	Cab Side Plate angle	_
	F/G	Leading Weather Board angle	_
	H	Engine Cover Side plate Rh frame	_
	J	Engine Cover Side plate LH front	_
	K	Engine Cover Butt Strap long	_
17728		Arrangement of combined Steam and Oil Valve	19.10.34
17729	A	Idler Spur Wheel pin	20.10.34
	B	Idler Wheel Pin Nut	_
	C	Chain Wheel Centre bush	_
	D	Chain Wheel Centre washer	_
	E	Pin Distance piece	_
	F	Shaft Distance piece	_
	G	Pump Box drive clutch	_
	H	Pump Driver Chain Wheel Centre	_
17730		Oil Fuel Tank (150 gallon)	22.10.34
17731		Arrangement of Control Columns	22.10.34
17732		Method of Fixing Spark Arrester to cab roof	22.10.34
17733	A	Steam and Oil Valve rocker	20.10.34
	B	Rocker end	_
	C	Trunnion Block, steam & oil valve	_
	D	Hand Control Spindle	_
	E	Fulcrum Pin, steam&oil valve	_
	F	Fulcrum Pin jaw, steam & oil valve	_
	G	Safety Valve Spring	_
	H	Safety Valve Spring CANCELLED	_
17734	A	Engine Cover Rear Angle	23.10.34
	B	Engine Cover Top Plate - front	_
	C	Engine Cover Top Plate - rear	_
	D	Drivers seat	_
	E/F	Whistle Handle and Handle Ferrule	_
17735		Boiler Foot Anchorage	23.10.34
17736	A	Engine Cover Front plate	26.10.34
	B/C	Front Plate Packing piece	_
	D	Front Door	_
	E	Front Door runner	_
	F	Packing Piece (front door runner)	_
	G	Engine Cover Front angle	_
	H	Engine Cover side plate LH front	_
	J	Leading Weather Board BTM angle	_
17737	A	Compressor Driver sprocket	23.10.34
	B	Pump Driver Chain Wheel	_
	C	Locking Washer	_
	D	Pump Driven sprocket	_
	E	Clutch Shaft bracket	_
	F	Clutch Operating lever	_
17738		Arrangement of Cab and Engine cover	29.10.34
17739	A	Arrangement of Rear Drawbar bracket and channel	24.10.34
	B/C/D	Drawbar Cross channel	_
	E/F	Corner gussets	_
	G	Rear Drawbar Bracket	_
17740		Coupling Chain Guard	24.10.34
		Driving Chain Guard	_
17741	A	Method of Retyring Newlay Wheels 1655L	7.11.34
	B/C	30" dia Tyred wheels	_
17742	A	Clucth Operating Lever barcket	24.10.34
	B	Fork Shaft Lever	_
	F/G	Headboard side angles	_
	C	Platform Front Corner angle	_
	D/E	Platform Front Corner angle	_
	F/G	Headboard Side Angles	_
	H	Foot Control Stiffener plate	_
17743		Water Tank	25.10.34
17744	A	Tank Filler Seating	26.10.34
	B/C/L	Tank Strap Bolt	_
	D	Tank Strap Stiffener	_
	E/F	Tank Strap Stiffener	_
	G	Tank Bottom Stiffener	_
	H	Tank Bottom packing	_
	K	Tank Top Stay	_
17745	A	Tank Levelling pipe	26.10.34
	B	Tank Levelling Pipe elbow	_
	C/F	Tank Levelling Pipe connection	_
	E	Tank Filler Lid seating	_
	D	Washer Plate to Leather filler	_
17746		Arrangement of Water Tanks	13.11.34
17747	A	Drawhook and chain	26.10.34
	B	Drawbar Bracket Angle	_
	C	Bracket Angle Packing piece	_
	D	Drawhook washer - leading end	_
	E	Drawhook washer - trailing end	_
17748	A	(rear) Tyre carrier stay	26.10.34
	C	Tyre Carrier clip	_
	E	Tailboard Stiffening angle	_
	B	Tyre Carrier stay (front)	_
	D	Tyre carrier	_
17749		Arrangement of Throttle valve	27.10.34