16750	A/E	Steam Brake Cylinder	2.3.34
	B	Cylinder Cover	_
	D	Piston Ring (brico), CANCELLED	_
	C	Piston	_
16751	A	Reversing Gear Centre Box	28.2.34
	B/C	Control Column Base	_
16752		Reversing Gear Control Box	2.3.34
16753	A	Throttle Shaft Bracket	2.3.34
	B/C	Distance Piece	_
	D	Centre Box Cover Plate	_
	E	Centre Box shaft	_
	F	Centre Box Sprocket	_
	G	Control Box Cover Plate	_
	H	Throttle Shaft lever	_
16754		Tank *text missing*	2.3.34
16755	A	Tank Filler Lid	2.3.34
	B	Exh. Bend to Primary feedheater	_
	C/D	Exhaust Pipe Elbow	_
16756	A	Feedheater Top	1.3.34
	B	Feedheater Bottom Cover	_
	C	Feedheater Top Cover	_
16757	A	Handbrake Column Carrier angle to platform	1.3.34
	B	Handbrake Column Carrier angle to beam	_
	C	Handbrake Column Carrier plate	_
	D	Handbrake Column Carrier angle	_
	E	Handbrake Column Base	_
	F&J	Footstep Back plate	_
	G	Top Footstep	_
	H	Bottom Footstep	_
16758	A	Turntable Ring cleats	2.3.34
		Tipping Cross Channel cleat	_
	H	Handbrake lever rack	_
	J	Steam Trap Support	_
	F	Handbrake lever	_
	G	Handbrake Lever bracket	_
	K	Steam Trap Support Packing piece	_
	L	Hoisting Engine Support cleat	_
16759		Arrangement of Control Column	2.3.34
16760	A	Arrangement of Speedometer drive	2.3.34
	B	Speedometer protector	_
	C	Speedometer bracket	_
	D/E	Tar, Spray Shield Extension Top plate	_
16761	A/B	Side Channels	2.3.34
	C	Tailboard End Protection plate	_
	E/F	Headboard support angle	_
	D	Body Side Stay	_
	G	Body Side knee	_
16762	A	Feedheater Bottom flange	2.3.34
	B	Feedheater Flanged Commection	_
	C	Feedheater Drum	_
	D	Arrangement of Feedheater Inner tube	_
	E/F/G/H	Feedheater Lagging cover	_
	P	Feedheater Bend	_
16763		Arrangement of Rear mudguards	3.3.34
16764		Exhaust Branch on Cylinders	5.3.34
16765	A	Feedheater Bend Flange	5.3.34
	B	Feedheater Bend Flange	_
	C	Oil Tank Filler Flange ring	_
	D	Throttle Valve cover flange	_
	E	Oil Tank Filling Pipe flange	_
		Plug Cock Falnge (oil tank filling pipe)	_
	G	Steam Flange - female	_
	H	Suction Pipe flange	_
16766		Arrangement and Detail of frame	7.2.33
16767		Arrangement and Detail of frame	6.3.34
16768		Arrangement and detail of Frame	6.3.34
16769	A	Arrangement of Rear Mudguards	18.3.34
	B	Arrangement of Front mudguard	_
	C/D	Front Mudguard Rear Support	_
	E/F	Tyre Carrier stay	_
	G	Arrangement of Tyre Carrier	_
16770		Proposed Arrangement of Control rods	5.3.34
16771		Proposed Trailer for Generating set	6.3.34
16772	A/B/C	Rear Corner Post	6.3.34
	D/E	Rear Corner plate	_
	F/G	Front Corner plate	_
	H/J	Side End Protection plate	_
	K	Headboard Protection plate	_
	L/M	Cross Bearer Bracket	_
	N	Cross Bearer Bracket	_
16773	A	Front catch bracket	7.3.34
	B	Rear catch bracket	_
	C	Bodyside Dowel pin	_
	D	Body Side Dowel Plate	_
	E/F	End Cross Bearer gusset	_
	J	Body Front Support	_
	H	End Cross Bearer bracket	_
16774		Exhaust Branch to Feedheater	6.3.34
16775		Arrangement of 15"-3" Body with Fixed Headboard and removable extension	2.3.34
16776	A	Body Side Bracket	5.3.34
	B/C	Front Corner Plate	_
	D/E	Rear Corner plate	_
	F	Headboard Extension support washer plate	_
	G	Body Side Knee	_
	H	Body Side stay	_
	J	Headboard stay	_
	K	Headboard Extension support	_
16777	A	Body Side Knee	5.3.34
	B	Vertical Cope bar	_
	C/D/H/J	Front Corner angle	_
	E/K	Body Side stay	_
	F/G	Rear Corner angle	_
16778	A	Side and Tailboard Hinge	6.3.34
	B	Tailboard Cope Bar	_
	E	Back Catch Plate	_
	C	Tailboard Centre Washer plate	_
	D	Bodyside Cope bar	_
	F	Back Catch bracket	_
	G	Headboard Protection plate	_
16779	A	Throttle Lever pin (in column) LH	7.3.34
	B	Throttle Lever pin (in column) RH	_
	C	Throttle Gear Lever	_
	D	Lever (throttle)	_
	E	Lever (reverse)	_
16780		Collector Pipes	7.3.34
16781	A	Brake Hanger pin	7.3.34
	B	Brake Release Spring	_
		Eye Bolt for Brake Release spring	_
		Spring Shackle	_
		Throttle Valve rod	_
16782		Arrangement of Brake gear	12.3.34
16783	A	Circular Cover on Tank Front	7.3.34
	B	Circular Cover on Tank back	_
	C	Filling Up Plate Condense Chamber front	_
	D	Filling Up Plate (under condenser)	_
	E	Joint strip	_
	F	Stiffening Plate for Stirrup	_
16784	A	Ash Pan Catch	7.3.34
	B	Ash Pan Catch Rest	_
	C	Brackets for Snatch Rod	_
	D	Bar for Stirrup	_
	E	Ash Pan Catch Bracket	_
	F	Snatch Rod for Ashpan catch	_
	G	Stirrup for Ashpan	_
	H	Arrangement of Ashpan Gear showing drilling	_
16785		Detail of Frame Drilling	9.4.34
16786		Brake Rod (rear)	7.8.34
16787	A	Frame Stay (front)	7.3.34
	B/C	Frame Stay cleat	_
	D	Brake Cylinder Support angle	_
	E	Brake Cylinder Support plate	_
16788
16789	A	Brake Suspension pin	8.3.34
	B	Brake Fulcrum pin	_
	G	Brake Pull bar	_
	C/D	Spring Suspension link pin	_
	E/F	Bridge Piece bracket	_
	H	Brake Bridge Stiffening plate	_
16790		Arrangement of Frame	8.3.34
16791
16792		Development of Outer Shell	8.3.34
16793	A/B	Frame Side Channel	8.3.34
	C/D	Frame Side Channel stiffener	_
	E	Frame front Cross channel	_
	F	Frame Rear Cross channel	_
	G	Frame Pivot Channel	_
	H	Frame Centre Cross channel	_
16794	A/E	Body Side Knee Stay	8.3.34
	B	Stay Clip	_
	C	Support Socket Packing plate	_
	D	Torque tube	_
16795		15" - 3" x 7" - 0 3/4" body	8.3.34
16796	A	Boiler Support channel	8.3.34
	B	Boiler Support Channel Cleat	_
	C	Boiler Support Channel cleat	_
		Footplate Support (rear)	_
	F	Footstep Support (front)	_
16797	A/B	Turntable Ring Support bracket	9.8.34
	C	Brake Rope Pulley Support channel	_
	D/E	Rear Spring Side Channels	_
	F/G	Front and Rear Spring Cross channel	_
	H	Turnatble Ring (top)	_
	J	Turntable Ring (bottom)	_
16798	A	Pump Station Bend	8.3.34
	B	Air Vessel	_
	C	Arrangement of Flex Metallic Suction pipe	_
16799	A	Arrangement of Turntable	9.3.34
	B/C	Turntable Side Channel	_
	D	Turntable Pivot Channel supports	_
16800		Arrangement of Frame	9.3.34
16801		Proposed Trailer for generating set	10.3.34
16802		Rear Window	12.3.34
16803		Arrangement of Whistle	12.3.34
16804	A	Arrangement of 200HP Luxuary Railcar
	B	Arrangement of 200HP Luxuary Railcar
16805	A/B	Cleat to frame and Front Stretcher	12.3.34
	C/D	Cleat to frame and Front Stretcher	_
	E/F	Cleat to frame and Front Stretcher	_
	G/H	Cleat to Frame and Aux: engine support	_
	J	Angle Support for Rear Loading weight	_
	K	Cleat to Frame and Rear Horizontal stretcher	_
	L/M	Angle Support for Middle load weight	_
	N	Angle to Vertical and Horizontal Stretchers	_
16806		Assembly of Side Window	13.3.34
16807		Arrangement of 18" - 0"platform	14.3.34
16808	A	Arrangement of Stop Valve	14.3.34
	B	Stop Valve	_
	C	Stop Valve Stuffing box	_
		Stop Valve spindle	_
	G/M	Firebox Lifting rod	_
	H/N	Firebox Lifting Channel - bottom	_
	J/P	Firebox Lifting Channel - top	_
16809	A	Fan Casing Ring - bottom	14.3.34
	B	Fan Casing ring - top	_
	C	Fan case beading	_
16810	A	Angle to Frame and platform (RH rear)	14.3.34
	B	Angle to Frame and platform (LH rear)	_
	C/D	Angle to Frame and Platform (front)	_
	E	Angle to Horizontal and Vertical stretchers	_
	F	Middle Weight Support angle	_
16811	A	Hoisting Engine Support	15.3.34
	B/C	Hoisting Engine Support cleat	_
	D	Structure Support plate	_
	E	Drawbar bracket boss	_
	F	Nozzle Operating Gear Support	_
	G/H	Nozzle Operating Gear Extension Support	_
	J	Operating Rod lever	_
16812	A/B	Centre Side hinge	15.3.34
	C	Side and Tailboard hinge	_
	D/E	Side rear End protection plate	_
	F/H/G/J	Side Front End Protection plate	_
	K	Tailboard End protection plate	_
	L/M	Side Centre End Protection plate	_
16813	A/B	Side Rail Cope Bar (top)	15.3.34
	C/D	Side Rail Cope Bar (front bottom)	_
	E/F	Side rail Cope bar (rear bottom)	_
16814	A	Lifting Beam (complete)	14.3.34
	B	U-Bolt for Lifting	_
	C	Holding Down Bracket	_
	D	Wooden Packing block	_
	E	Steel Packing strip	_
	F	Stop-Piece	_
	G/H	Arrangement of Lifting Tackle	_
16815	A	Fan Outer Casing	15.3.34
	B/C/D	Fan Inner casing	_
16816	A/B	Drawbar Members RH and LH	15.3.34
	C	Tie Bar Flange	_
	D	Tie Bar	_
	E/F	Sprayer Structure Side member	_
16817	A/B	Platform Running angle	15.3.34
	C	Running Angle End plate	_
	D	Footstep Angle Joint strip	_
	E	Angle to Buffer Beam and End plate	_
	F/G	Shunter Step angle to frame	_
16818		Arrangement Tar Spraying Gear Structure	16.3.34
16819	A	Drawbar Bracket Top Plate	15.3.34
	B	Drawbar Bracket Bottom Plate	_
	C	Cross Stay	_
	D	Distance Piece	_
	E	Drawbar Stop	_
	F	Platform Support	_
	G	Platform Handrail	_
	H	Tar Pump Packing piece	_
16820		Platform Plate
16821	A	Front Roof Rafter	15.3.34
	B	Front Roof Rafter	_
	C	Bulkhead and Front Roof angle	_
	D	Liner to Bulkhead angle	_
16822	A	Arrangement of Canopy Nameboard	15.3.34
	B	Nameboard Support bracket	_
	E	Nameboard Bracket Doubling strip	_
	C/D	Rear Mudguard Rear Stay	_
16823	A	Arrangement of Headboard	16.3.34
	B	Headboard Protection plate	_
	C/D	Headboard Support	_
	E	Arrangement of Tyre Carrier Boards and Packing	_
	F	Centre Stanchion Tie Rod Eye Bolt	_
	G	Centre Stanchion Tie Rod	_
16824
16825		Proposed Trailer for Bore Hole Pump, etc	17.3.34
16826	A	Operating Rod lever	19.3.34
	B	Operating Spindle	_
	C/K	Tar Pump Sprocket centre	_
	H	Operating Lever bolt	_
	D	Operating Lever bolt	_
	E/F	Tank Strap bracket	_
	G/J	Tank Strap end	_
16827	A	Tank Strap	21.3.34
	C/D	Sprayer Operating Bar Extension	_
	E	Auxiliary Bunker stiffener	_
	F	2 1/2" Three Way Main cock	_
	B	Sprayer Operating Bar	_
	G	Special 2 1/2" Gland Packed 3 way plug cock	_
16828	A	Spray Pipe	29.3.34
	B/J	Relief Valve Flange	_
	C	Outside Suction branch	_
	D/G/K	Square Connecting flange	_
	E/F/H	Round Connecting flange	_
16829		Arrangement of Superheater Coil stays	6.7.34
16830
16831	A/B	Tar Spray Shield angle	12.4.34
	C/D	Tar Spray Shield extension angle	_
	E	Connecting bar	_
	F	Tar Spray Shield Top plate	_
	G	Foot Release	_
16832		HotWell Cover (water tank)	19.3.34
16833	A/B	Steam Brake Cylinder	19.3.34
	C	Cross Tube Bracket	_
	D	Cross tube	_
16834	A	Horizontal Frame Stretcher (hind)	16.3.34
	B	Horizontal Frame Stretcher (front)	_
	C	Vertical Frame Stretcher (hind)	_
	D	Vertical Frame Stretcher (front)	_
16835	A	Arrangement of rear Mudguards	19.3.34
	B	Arrangement of Front Mudguards	_
	C/D/H/J	Rear Mudguard Rear stay	_
	E	Rear Mudguard Top Stay	_
	F/G	Front Mudguard Top Stay	_
16836	A	Tank Support bracket	15.3.34
	B	Tank Filler Bend	_
	C	Water Tank Levelling pipe	_
16837	A	Tipping Cylinder	15.3.34
	B	Tipping piston	_
16838	A/B	Tipping Cylinder Bracket	19.3.34
	C	Tipping Piston Cup washer	_
	D	Tipping Piston bottom washer	_
	E	Piston Rod Bearing (top half)	_
	F	Felt washer	_
16839
16840	A	Angle-Hind Vertical to platform	15.3.34
	B	Angle-Front Vertical to platform	_
	C	Exhaust Pipe carrier(left hand)	_
	D	Exhaust Pipe carrier(right hand)	_
	E/F	Exhaust Pipe carrier	_
	G	Steam Pipe Carrier plate to angle	_
	H	Steam Pipe Carrier plate to centre	_
	J	Stirrup Round axle (front)	_
16841		Water Tank (small 55 gallons)	20.3.34
16842	A	Frame Angle Supporting tank	9.3.34
	B	Frame Angle Supporting tank	_
	C/D	Outs. Cleat to Frame and Hind Buffer beam	_
	E/F	Ins. Cleat to Frame and Hind buffer beam	_
	G/H	Ins. Cleat to Frame and Front buffer beam	_
	J/K	Outs. Cleat to Frame and front Buffer beam	_
	L/M	Cleat to Frame and Hind stretcher	_
	N/P	Cleat to Frame and Hind stretcher	_
16843	A/B	Cab Front and Front Side Plate angle	9.3.34
	C/D	Partition and Front Side plate angle	_
	E	Cab Side Stiffener angle	_
	F/G	Cab Side and Roof Plate angle	_
16844	A	Cross Tube	20.3.34
	B	Blast Flange and Bend	_
16845		Front Side plate	14.3.34
16846	A	Water Tank Levelling pipe	18.4.34
	B	Water Tank Levelling pipe	_
	C	Small Water Tank Support strap	_
	D	Large Water Tank Support strap	_
	E	Tank Steady bracket (large)	_
	F	Steady Bracket packing	_
16847		Front Roof plate	15.3.34
16848	A/B	Front Roof and Side Plate angle	16.3.34
	C	Front Side and Roof Stiffener	_
	D/E	Front Side Pillar	_
	F	Front Roof and Front Plate angle	_
16849	A	Small Tank Steady Bracket (top)	20.3.34
	B	Small Tank Steady Bracket (bottom)	_
	C	Tank Support Bracket packing	_
	D	Tank Filler Pipe carrier	_
	E	Tank Filler Pipe clip	_
	G	Tank Levelling Pipe carrier	_
	F	Tank Filler Pipe	_
	H	Tank Suction pipe	_
16850
16851	A	Tipping Cylinder Bottom cover	21.3.34
	B	Grease Retainer ring	_
	C	Spring Packing	_
	D	Front Wheel hub	_
16852		Front End Plate	20.3.34
16853	A	Cab Back Plate - upper	7.3.34
	B	Cab Back Plate - lower	_
	C	Cab Back and Floor Plate angle	_
	D	Front End Plate Joint tee	_
16854	A/B	Shunters Step Angle to Frame (hind)	20.3.34
	C	Shunters Step Side plate	_
	D	Shunter Step Bottom plate	_
	E	Angle Shunter Step to Backplate	_
	F	Angle Shunter Step bottom to sides	_
	G	Shunters Step Back plate	_
	H	Cab Footstep Angle to platform	_
	J	Cab Footstep stay	_
16855	A/B	Throttle Casing	2.3.34
	C/D	Joint Strip for Throttle casing	_
	E/F	Skirt for Throttle casing	_
	M	Shield for Weir Pump Delivery Pipe	_
	N	Bracket to Steady Throttle casing	_
	G to L	Inspection Door for Feedheater valves	_
16856	A	Stretcher for Aux. Engine support	21.3.34
	B	Angle to Bottom Plate and Aux. Engine stretcher	_
	C	Angle to Aux. Engine Stretcher and Locking plate	_
	D	Aux. Engine Support angle	_
	E	Aux. Engine Support RH	_
	F	Aux. Engine Support LH	_
16857		Front Window assembly	22.3.34
16858	A/B	Cab Side plate	9.3.34
	C/D	Cab Side plate	_
	E	Side Doorway Top Plate	_
	F/G	Cab Side and Floor plate angle	_
16859		Arrangement and Detail of Frame	22.3.34
16860		Rear Bogie Spring shaft	24.3.34
	B/C	Rear Mudguard Rear Stay (btm)	_
	G/H	Spring Suspension link	_
	D	Rear Bogie Spring shaft	_
	J/K	Trailing Axle Brake lever	_
	L	Brake Band lever	_
16861	A/J	Cab Side and Front Plate angle	10.3.34
	B/C	Cab Side and Back Plate angle	_
	D/E	Cab Side Doorway angle	_
	F/G	Cab Side Doorway angle	_
	H	Cab Back plate joint tee	_
16862	A	Partition Plate RH	16.3.34
	B	Partition Plate LH	_
16863	A	Bulkhead plate	16.3.34
	B	Joint Strip to Front roof	_
	C	Joint Strip to Front roof	_
	D	Partition Plate joint strip	_
	E	Cab Back Plate stiffener	_
	F	Cab Roof plate joint strip	_
16864	A	Arrangement of 13"-6" x 7"-0 3/4" platform	26.3.34
	B	Arrangement of 16"-0" x 7"-0 3/4" platform	_
16865	A	Arrangement of 17"-0" x 7"-0 3/4" platform	28.3.34
	B/C	Arrangement of 17"-8"/17"-6" x 7"-0 3/4" platform	_
16866	A	Driving Shaft bevel	22.2.34
	B	Axle Spur	_
	C	Layshaft spur	_
16867		Arrangement and Detail of Frame	28.3.34
16868		Detail of Frame	23.3.34
16869	A	Angle on front platform plate	26.3.34
	B/C	Corner angle - condenser chamber front	_
	D/E	Corner angle - filling up plate	_
	F/G	Angle - condenser floor plate to frame	_
	H	Tank Filler Lid Clamp	_
	J	Steam Pipe Carrier bracket	_
	K	Steam Pipe carrier link	_
16870	A	Rear Corner stay	6.4.34
		Tank Strap Bracket, NEVER USED	_
	G/H	Side Support	_
	B/C	Tank Strap Bracket	_
	D/E	Weight Fixing strap	_
	F	Weight Fixing strap	_
	J	Loading weight	_
16871	B	Angle to Hind Buffer Beam and Platform	27.3.34
	D/E	Platform Angle Outside Frame (and beam)	_
	C	Angle to front Buffer Beam and Platform	_
	A	Stiffening Angle on Hind beam	_
	F/G	Platform Angle Outside frame (front beam)	_
	H	Angle for Load Weight on Front beam	_
16872	A/H	Cab Side and Floor Plate angle	13.3.34
	B/C	Cab front and Floor Plate angle	_
	E/F	Front Side Plate and Floor angle	_
	D	Front Plate and Floor plate angle	_
	G	Partition and Floor plate angle	_
16873		Bush or Collar	21.3.34
		Special Set pin	_
		Body Stud	_
		Special bolt	_
16874		Arrangement of Steam Brake Piping	26.3.31
16875	A	Ventilator Plate	26.3.34
	B	Weather angle	_
	C	Weather angle	_
	D	Ventilator Plate end angle	_
	E	Ventilator Plate distance piece	_
16876	A	Cab Roof angle - back	26.3.34
	B	Cab Roof angle - front	_
	C	Cab Roof angle - middle	_
	D/E	Cab Roof plate - side	_
16877
16878		Arrangement of Control Column	26.3.34
16879	A/B	Cab Front Plate	26.3.34
	C/D	Cab Roof Plate Liner	_
	E/F	Firebrick support plate	_
	G/H	Firebrick support bracket	_
	J/K	Firebrick Support bracket	_
16880
16881		Arrangement of 3 Way Tipping platform	28.3.34
16882	A	Steam Brake Valve body	27.3.34
	B	Brake Valve spindle	_
	C	Brake Valve handle	_
	D	Brake Valve clip	_
	E	Brake Valve Neck ring	_
	F	Brake Valve gland ring	_
	G	Brake Valve gland nut	_
16883	A/J	Side plate	6.4.34
	B/K	Side Door	_
	C/D	Tank Extension plate	_
	E	Cross stay	_
	F	Tank Cradle	_
	G/H	Side support	_
16884	A	Spray Pipe flange pin	27.3.34
	B	Spray Pipe flange dog	_
	C	Spray Pipe eyebolt	_
	D	Spray pipe flange	_
	E	2 1/2" Plug cock	_
	F	Rear Platform	_
	G/H	Brake Rope Guide roller bracket	_
	J/K	Frame end cleat	_
16885
16886		Arrangement and Detail of Tipping platform	27.3.34
16887		Oil Fuel Gear Steam and Oil Valve body	27.3.34
16888	A	Fittings on Stop valve chest	28.3.34
	B	Fittings on Axu. Valve chest	_
16889	A	Cab Roof Plate - back	27.3.34
	B	Cab Roof Plate - front	_
16890		Cab Door with Winding windows	28.3.34
16891	A	Side Header boss	29.3.34
	B	Stop valve header boss	_
	C	Stop Valve header ferrule	_
	D	End Fitting for Stop Valve header	_
	E	Serrated Washer for side header	_
	F	Serrated washer for stop valve header	_
	G	Dust Cap for Grease Nipple 3323H	_
	H	Leather Washer for dust cap	_
16892	A/B	Superheater Side header	29.3.34
	C	Superheater Header (stop valve)	_
16893	A/B	Body Side knee	29.3.34
	C/D	Rear Corner angle	_
	E/F	Rear Mudguard	_
16894		Oil Fuel Tank (50 galls)	29.3.34
16895		Ladder	3.3.34
16896	A/B	Cab Side Door plate	3.4.34
	C	Cab Side Door plate coping	_
	D	Packing Plate to Side Door	_
	E/F	Cab Door Catch angle	_
	G	Cab Window coping	_
	H	Cab Window coping	_
	J	Cab Window coping	_
16897	A/B	Front Corner plate	3.4.34
	C/D	Rear Corner plate	_
	E	Stoking Chute - bottom	_
	F	Catch Plate	_
	G/H	Draw Bar pin	_
16898
16899	A	Cone (oil fuel gear sighting tube)	19.3.34
	B/C	Combustion Chamber Suspension bracket	_
16900		Oil Fuel Burner base casting	16.3.34
16901	A	Oil Fuel Burner cone (outer)	17.3.34
	B	Oil Fuel Burner cone (inner)	_
	C	Burner base distance piece	_
16902	A	Burner body, NOT USED	29.3.34
	B	Burner nozzle	_
	C	Burner gland	_
	D	Burner jet	_
	E	Spring Seating (pressure control valve)	_
16903		Burner Housing (oil Fuel gear)	16.2.34
16904		Combustion Chamber, Firebrick Arrangement and Details	21.3.34
16905	A/J	Strainer plate	4.4.34
	B/C	Strainer plate guide	_
	D/E	Sprayer Shield Support	_
	F/G	Sprayer Shield Support	_
	H	Ashpan	_
16906		Arrangement of Frame	4.4.34
16907	A/B	Side Channel	4.4.34
	C	Front Cross channel	_
	D	Rear Cross channel	_
	E/F	Tank Support channel	_
	G	Platform Support angle	_
	H	Platform Support	_
16908	A	Diagonal Cross stay	6.4.34
	B	Tank Baffle Doubling plate	_
	C	Tank Baffle Doubling plate	_
	D	Baffle angle plate	_
	E	Baffle angle plate	_
16909		Water Tank (385 gal capacity)	6.4.34
16910	A	Crosshead Guide and Crankcase reservoir	4.4.34
	B	Reservoir cover	_
16911	A	Tank End Cleat	6.4.34
	B	Tank Rear Extension plate	_
	C/K	Loading Weight (2 tons)	_
	D/E	Tank Strap	_
	F/G	Side Plate bracket	_
	H/J	Side Plate bracket	_
16912	A	Automatic Filling Valve body (oil tank)	9.7.34
	B	Valve Body Cover	_
	C	Sleeve valve	_
	D	Sleeve valve lever	_
	E	Sleeve valve pin	_
	F	Sleeve Valve washer	_
		Water Tank Drain pipe	_
16913	A	Manhole cover	4.4.34
	B	Manhole Stiffening ring	_
	C	Stiffening PL'T for Oil Gauge elbow	_
	D	Stiffening PL'T for Outlet and drain	_
	E	Adapter for Top and Bottom cock	_
		Oil Level Float stem	_
	G	Filler Stiffening plate	_
	H	Filler body	_
16914		Drawbar	6.4.34
16915
16916
16917	A	Tyre Strap	4.4.34
	B	Tyre Strap Steady bracket front	_
	C/D	Tyre Strap Steady bracket rear	_
	E	Tyre Carrier platform	_
16918		Water Tank	5.4.34
16919	A	Funnel Angle to Flue pan	5.4.34
	B	Funnel Angle to roof	_
	C	Funnel Coping	_
	D	Outer Funnel (top half)	_
	E	Outer Funnel (bottom half)	_
	F	Inner Funnel (complete)	_
	G	Arrangement of Funnel	_
16920	A	Exhaust Pipe to Feedheater Branch(LH side)	5.4.34
	B	Exhaust Pipe to Feedheater Branch (RH side)	_
	C	Exhaust Pipe from Primary Feedheater (LH side)	_
	D	Exhaust Pipe from Primary Feedheater (RH side)	_
	E	Steam Pipe to Hind Engine LH side, CANCELLED	_
	F	Steam Pipe LH side and engine	_
	G	Steam Pipe to Front Engine RH side, CANCELLED	_
	H	Steam Pipe RH side, front engine	_
16921	A/J	Drawbar End	7.4.34
	B	Drawbar Angle stiffener	_
	C	Boss	_
	D	Spare Tyre carrier	_
	E	Arrangement Spare Tyre carrier	_
	F/G	Tyre Carrier stay	_
	H	Tyre Carrier block	_
16922	A	Spring Housing	4.4.34
	B	Pressure Control Valve body	_
	C	Pressure Control Valve seat	_
	D	Pressure Control valve	_
	E	Pressure Control Valve holder	_
16923		Arrangement of Oil burner staem valve	18.3.34
	A	Steam Valve stem	_
	B	Valve bush	_
	C	Stuffing box	_
	D	Valve steam guide	_
	E	Guide nut	_
	F	Gland Neck ring	_
	G	Steam Valve elbow, Steam and oil valve body	_
	H/J	Valve stem cap	_
16924	A	End Plate	6.4.34
	B/C	Spray Pipe extension	_
	D	Lower End plate	_
	E	Jockey Sprocket bracket	_
16925	A/B	Water Tank straps	6.4.34
	C	Tank Strap end	_
	D	Tank Adjusting Block wedge	_
	E	Tank Adjusting Block	_
	F	Tank Side blocks	_
	G	Tank Side block plate	_
	H	Water Tank Connections	_
16926		Arrangement of Rear Mudguards	6.4.34
16927	A	Condenser Cover Plate - bottom	11.4.34
	B	Condenser Cover Plate - top	_
	C/D	Condenser Cover Packing plate top	_
	E/F	Condenser Cover packing plate bottom	_
	G/H	Condenser Cover plate strip	_
	J	Handrail packing plate	_
16928	A	Outlet Pipe	9.4.34
		Outlet Pipe hanger	_
	E/F	Steam trap Support, CANCELLED?	_
	H/J	Rear Mudguard Rear Stay	_
	G	Toolbox	_
16929		Arrangement of Tar Spray Shields	25.4.34
16930		Water Tank (large 206 gallons)	10.4.34
16931		Arrangement of 13"-6" body	18.4.34
16932	A	Lubricator Drive housing	10.4.34
	B	Knuckle Bush housing	_
	C	Knuckle housing (axle end)	_
	D	Special Axle Nut Locking bar	_
	E	Knuckle bush (bearing end)	_
		Knuckle (lubricator drive)	_
		Lub. Bearing drive distance washers	_
16933	A	Tyre Strap	10.4.34
	B	Arrangement of Cab with Side panel posts	_
16934	A/C	Frame Front Cross member	10.4.34
	B/D	Front Corner	_
16935		Outline Arrangement of Sentinel 'S4' chassis	10.4.34
16936		Outline Arrangement of Sentinel 'S6' chassis	10.4.34
16937	A	Vac. Cross Shaft bracket	10.4.34
	B	Throttle Cross shaft bracket	_
	C/E	Cross Shaft bracket	_
	D	Self-aligning bearing housing	_
16938	A	Body Side and Tailboard hinge	18.4.34
	B	Vertical Cope bar	_
	C/D	Platform Corner plate	_
	E/F	Body Side Front End Protection plate	_
	G	Body Side Rear End Protection plate	_
	H	Tailboard End Protection plate	_
	J	Bunker Support stay	_
16939	A/K	Handbrake Lever	10.4.34
	B	Hand Brake bracket	_
	C/D	Arrangement of Mudguards	_
	E/L	Trailer supports	_
	F	Trailer support sockets	_
	G/H	Centre Platform Side and End angles	_
	J	Backing plate	_
16940		Special Heavy 20'-0' Scraper conveyor, 24' wide belt
16941	A	Steam Pipe to Hind engine LH side	10.4.34
	B	Steam Pipe to Front engine RH side	_
	C/L	Steam Pipe flange	_
	D	Elbow to Steam brake cylinder	_
	E	Lubricator pipe (spring bracket)	_
		Steam ball	_
16942	A	Lubricator Driving crank	11.4.34
	B/J	Driving crank pin	_
	C	Lub. Driving bar pin	_
	D	Sanding valve washer	_
	E	Control Lever Hose nipple	_
	F	Hose Nipple elbow	_
	G	Oil Level Gauge Glass washer	_
	H	Connecting Rod Jaw Pin	_
16943	A	Arrangement of Rear Mudguards	11.4.34
	B	Arrangement of Front Mudguards	_
	C/D	Rear Mudguard Rear stay (top)	_
	E	Rear Mudguard Diagonal (rear stay)	_
	F/G	Rear Mudguard Diagonal stay (front)	_
	H/J	Front Mudguard Diagonal stay	_
16944		Arrangement and Detail of Frame	12.4.34
16945	A	Wood Distance piece	11.4.34
	B	Gauge board	_
	C	Gauge Board support	_
	D	Flange on Feed Pipe to oil tank	_
	E	Base for Filler cap	_
	F	Filter for Oil tank	_
	G	Stiffening plate for Roof rafter	_
16946		Proposed Arrangement of Timber Haulage waggon	12.4.34
16947		Proposed Arrangement of Timber Haulage waggon	12.4.34
16948		Combustion Chamber vent elbow	11.4.34
16949	A	Stool Support bracket	12.4.34
	B	Chain Case Dust cover	_
	C	Sanding Cross Shaft bracket	_
	D	Throttle Cross shaft bracket	_
	E	Bearing Support bracket	_
16950		Water Tank	12.4.34
16951		Rear Bogie Suspension bracket and cap	12.4.34
16952		20"-0" x 7"-4 1/2" Flat platform	12.4.34
16953	A	Front Support Bracket (combustion chamber)	12.4.34
	B	Rear Support bracket (combustion chamber)	_
16954	A/B/C/D	Radius Rod and Pins	13.4.34
	E	Radius Rod Pin nut	_
	F	Packing washer	_
	G	Oiling Shield	_
	H	Joint for Air Pump Discharge and Feed Pump suction pipes	_
16955		Arrangement of Hose Box and Mudguards	12.4.34
16956	A	Operating Handle	12.4.34
		Control Lever	_
	C	Trottle Cross shaft end	_
	D	Throttle Bellcrank lever (front)	_
	E	Throttle Lever Bellcrank lever (rear)	_
16957		Boiler Blanket	13.4.34
16958	A	Hose Box Rear support	12.4.34
	B	Hose Box Centre support	_
	C	Hose Box Front support	_
	D	Rear Support Cleat Rh	_
	E	Rear Support Cleat Lh	_
16959
16960	A	Control Rod end	11.5.34
	B	Sprocket Distance piece	_
		Coupling Spider	_
	C	Control Rod End Washer	_
	D	Chain Sprocket	_
	G	Control Rod End for 2% tube	_
	H	Control Rod End for 2% tube	_
16961	A	Centre Support Cleat RH	16.4.34
	B	Centre Support Cleat LH	_
	C	Front Support cleat RH	_
	D	Front Support cleat LH	_
	E	Tailboard Bottom angle	_
	F	Rear Cross channel	_
16962		Arrangement of Wheels and axle	16.4.34
16963	A	Development of Combustion chmaber wrapper	16.4.34
	B	Bottom plate	_
	C	Bottom angle ring (combustion chamber)	_
	D	Top ring (combustion chamber)	_
	E	Butt Strap	_
16964		Arrangement of Proposed Scraper conveyor	18.4.34
16965	A	Extension Outside Washer plate	16.4.34
	B	Extension supports	_
	C	Outlet pipe	_
	D	End Shield Canvas fixing bar	_
16966	A	Bellcrank Fulcrum pin (front)	16.4.34
	B	Bellcrank Fulcrum pin (rear)	_
		Throttle Cross shaft	_
	F	Throttle Cross shaft	_
	G	Lever (vacuum control)	_
	H	Vacuum Bellcrank lever	_
16967		Detail of Frame for 18"-0" platform DG6	17.4.34
16968	A	Tank Water Gauge cover plate	16.4.34
	B	Seating gauge cock	_
	C	Tank cover fitting plate on cab partition plate	_
	D	Tank Cover plate stiffening ring	_
	E	Tank Cover fitting plate	_
	F	Fitting plate for burner	_
	G	Circlip	_
16969	A	Arrangement of Rear Ladder of platform	14.4.34
	B/C	Rear Ladder side	_
	D	Rear Ladder verticle stay	_
	E	Rear Ladder bottom stay	_
	F	Rear ladder centre stay	_
16970		18"-0" platform	18.4.34
16971	A	Vacuum Fulcrum pin	17.4.34
	B	Vacuum Cross shaft	_
	C	Sanding Bellcrank lever	_
	D	Vacuum Control lever	_
	E	Lever Spindle	_
		Operating Handle pin	_
	H	Sanding Cross shaft	_
		Housing Packing piece	_
16972		Footplate Drilling	17.4.34
16973	A/B	Exhaust Pipe Manifold, NOT USED	4.7.34
		NOT USED	_
	C	Exhaust Pipe connection	_
		Exhaust Pipe	_
16974
16975		Arrangement of Hose box	17.4.34
16976	A	Thermostat Cover - partition plate	19.4.34
	B	Fitting Plate for Pipes-partition plate	_
	C	Partition Plate Joint strip	_
	D	Partition Plate Joint strip	_
	E	Oil Tank Filler Fitting plate	_
	F	Stud for Front Buffer beam	_
	G	Safety Bar for Engine	_
16977	A	Arrangement of Reversing Gear Centre box	18.4.34
	B	Arrangement of Reversing Gear Control box	_
16978		Arrangement of Headboard and Bolster	19.4.34
16979		Circlip (male)	19.4.34
		Circlip (female)	_
16980		Arrangement of Steam and Exhaust pipes	19.4.34
16981	A	Steam Brake Shaft bracket	20.4.34
	B	Front Spring Bracket pin	_
	C	Ratchet Control Quadrant boss	_
	D	Ratchet Control Quadrant	_
16982
16983	A	Bellcrank Lever (throttle)	20.4.34
	B	Throttle Lever spindle (front)	_
	C	Throttle Lever spindle (rear)	_
	D/E	Reverse Control shaft	_
	F	Control Rod end	_
	G	Adapter (control Box)	_
16984	A/B	Side Front End Protection plate	20.4.34
	C	Side Rear-end Protection plate	_
	D	Side Centre End protection plate	_
	J/K	Body Side bottom angle	_
	E	Platform Rear angle	_
	F	Platform Rear angle	_
	G	Body Side bottom angle	_
	H	Body Side bottom angle	_
16985	A	Steam Pipe bend	20.4.34
	B	Steam pipe clip	_
		Steam Pipe assembly	_
	C	Main Steam pipe	_
	E	Clip for Discahrge pipes	_
16986	A	Arrangement of Front Mudguard	24.4.34
	B	Arrangement of Rear Mudguard	_
	C/D	Rear Mudguard Rear Bottom stay	_
16987		Arrangement of Two Wheeled Trailer	23.4.34
16988	A	Drivers Sanding Valve body	23.4.34
	B	Sanding Valve plug	_
	C	Arrangement of Drivers Sanding valve	_
16989	A	Chain case RH	23.4.34
	B	Chain case LH	_
16990		Arrangement and detail of frame	26.4.34
16991	A	Chain Case Cover (RH)	24.4.34
	B	Chain Case Dust shield	_
	C	Chain Case cover LH	_
	D	Cover Locating	_
	E	Control Rod end cover	_
	F	Dust shield (top)	_
		Pull Rod Guide block	_
		Guide Block cover plate	_
16992		Arrangement of Oil Dipper	24.4.34
16993	A	Guide bracket for brake valve handle	24.4.34
	B	Guide bracket for brake valve handle	_
	C	Fulcrum pin	_
	D	Packing piece - control shaft bracket	_
	E	Liner to Bulkhead angle - top	_
	F	Hind Axle stirruo	_
16994		Arrangement of Combined Steam and Oil valve	27.5.34
16995	A	Oil Valve Stem Stuffing box	23.4.34
	B	Oil Valve stem	_
	C	Oil Valve Gland nut	_
	D	Oil Valve Gland neck ring	_
	E	Steam and Oil Valve Piston guide	_
		Steam and Oil Valve Piston	_
	G	Steam and Oil Valve piston cap	_
		Steam and Oil Valve rocker support	_
16996	A	Metering Valve seat	7.4.34
	B/J/K/L	Metering Valve seat	_
	C	Metering Valve stuffing box	_
	D	Stop Valve Gland Neck ring	_
	E	Stop Valve Gland bottom ring	_
	F	Metering Valve gland nut	_
	G	Stop Valve handwheel	_
	H	Pilot Valve seat	_
16997	A	Funnel Base casing	25.4.33
	B	Boiler Top Cover	_
16998		Turplat Noweld' forged Steel Buffer	18.5.34
16999		Henricot Coupler