16250	A	Top Horizontal Angle for front door	3.10.33
	B	Door Support Channel (front end)	_
	D	Door Support angle	_
	E	Angle to Platform and front end plate	_
	F	Angle to Platform and Rear End plate	_
	G	Horizontal Angle for rear door	_
16251		Rear Door Assembly complete	5.10.33
16252	A	Front Panel Door(assembly complete)	7.11.33
	B	Bottom Horizontal Cover strip (front end)	_
	C	Verticle Cover strip (front end)	_
	D/K	Joint Strip (front end)	_
	E	Cover Strip From Channel to angle	_
16253	A	Coal Bunker Door angle	11.1.34
	B	Rear Door hook	_
	C	Patch Plate for Tank Air Vent Pipe (rear)	_
		Stiffening Plate for Rear Door Ete Bolt	_
	E	Roof Angles to Plates Back and front	_
	F/G	Weather Angle to cab front	_
16254		Alteration to Box van	6.10.33
16255
16256	A/B/G/H	Side Channels	11.10.33
	C	Cross channel Cleat	_
	D	Front Cross Channel	_
	E	Centre Cross channel	_
	F	Turntable Front Cross Channel cleat	_
16257		Arrangement of Trailer Frame	10.10.33
16258	A	Frame Pivot channel	11.10.33
	B/C	Turntable Side Channel	_
	D/E	Front and Rear Turntable Pivot channel	_
	F	Turntable Front Cross channel	_
	G/H	Turntable Rear Cross channel	_
16259		Arrangement of Turntable	10.10.33
16260	A/R	Turntable Front Stay	12.10.33
	B	Pivot Pin Collar Pin	_
	C	Collar Pin Locking Pin	_
	D/E	Rear Spring Channel	_
	F/M/U/W/G/N/V/X	Corner Gusset plate	_
	H to P	Frame Pivot Channel support	_
	J	Turntable Pivot Channel support	_
	K/L	Rear Crosss Channel Cleat	_
16261	A/B	Arrangement of Frame Truss	13.10.33
	C/D	Side Channel Truss	_
		Rear Spring Pad packing	_
	F	Rear Cross Channel Cleat Packing	_
	G	Roping Button	_
16262	A	Bunker Side Joint plate	9.10.33
	B	Bunker Side Joint plate	_
	C	Bunker Side Joint plate	_
	F	Bunker Side Plate to Bottom Plate angle	_
	D/E	Bunker Side Plate Angle to Bottom plate	_
	G	Angle for Rear Door hinges	_
	H	Bunker Bottom Plate angle	_
16263		Ash Breeches chute	7.10.33
16264	A/B	Rear Corner angle	9.10.33
	C/D	Front Corner angle	_
	E	Side Extension Support channel	_
	F	Side Extension angle	_
	G/H	Headboard Side angle	_
	J/K	Platform Rear Corner angle	_
16265		Water Tank
16266	A	Valve Setting Indicator plate	6.6.30
	B	Control Column Index plate	_
	C	Reversing Wheel Rotation disc	_
	D	Reversing Wheel Instruction plate	_
	E	Wording for Instruction plate	_
16267	A	Bolster Crossbar-Outer Driving end	28.9.33
	B	Gusset to Solebar and crossbar	_
	B/C	Gusset to Solebar and bolster crossbars, NOT REQUIRED	_
	C	Bolster Gusset Driving end	_
16268
16269		Arrangement of Dynamo Drive	26.10.33
16270	A	Top Door in Body (assembly complete)	11.10.33
	B	Door Support angle (top door)	_
	C	Door Support Angle(top door)	_
	D	Stiffening Plate for Lamp Bracket	_
	E/K	Fixed plate for Body(front end)	_
16271	A	Dynamo Suspension bracket	11.10.33
	B	Dynamo Suspension Adjusting bracket	_
	C	Accumulator Box Side bolt	_
	D	Accumulator Box Top Bottom bolt	_
	E	Door Fixing Bolt plate	_
	F/G	Door Fixing bar(side)	_
16272		Arrangement of Feet for Spec Boiler	11.10.33
16273		Brake Shoe	11.10.33
16274	A/B	Angle for Cab Door catch
	C/D	Angle for cab Door hinge	_
	E	Cab Side Filling Up Plate angle to Platform	_
	F	Cab Front Plate Joint strip	_
	G	Cab Back Plate Joint Strip	_
	H	Cab Side Plate Joint strip	_
	J	Packing Strip for cab Door hinge	_
16275		Front Axle	12.10.33
16276	A	Solebar Truss Angle	25.8.33
	B/C	Truss Angle Queen Post	_
	D	Truss Angle Cross Tie	_
	E	Truss Angle Gusset	_
	F	Truss Angle cleat	_
16277	A	Bolster Crossbar - outer TE	24.8.33
	B	Bolster Crossbar - Inner Trailing end	_
	C	Bolster Crossbar - Inner Driving end	_
	D	Bolster Centre Gusset Trailing end	_
	E	NOT REQUIRED	_
16278	A	Headstock Plate (trailing end)	24.8.33
	B/C	Headstock Plate Stiffening angle	_
	C	NOT REQUIRED	_
	D	Headstock and Solebar Outer cleat	_
	E/F	Headstock and Solebar inner cleat	_
	G	Headstock Gusset - trailing end	_
16279	A	Bunker Front angle	13.10.33
	B/C	Cab Door Coping (top)	_
	D/E	Cab Door Coping (front)	_
	F/K/PG/L/Q	Cab Door Coping (rear)	_
	H/M/J/N	Cab Door Coping (bottom)	_
16280		Rear Axle	22.10.32
16281		Axle Shaft	19.10.33
16282	A/B	Body Side Knee	16.10.33
	C/D	Body Side Knee	_
	E/F	Tailboard Binding plate	_
	G/H	Tailboard Hinge	_
16283		Arrangement and Detail of Bunker	23.9.33
16284	A to J	Cab Window (L and R Hand )	13.10.33
	K/P	Cab Window catch (complete)	_
	L	Cab Window catch	_
	N	Fire Iron Carrier on Cab Back plate	_
16285		Arrangement of Throttle valve	31.10.33
16286	A	Cylinder Suspension bracket	17.10.33
	B	Brake Operating Rod	_
	C	Brake Link Guide	_
	D	Cylinder Suspension bracket	_
	F/G	Steam Brake Rod	_
	H/J	Weigh Shaft Lever clip	_
	K	Weigh Shaft Lever	_
16287
16288
16289	A/B	Cab Door Top Rear Stiffening plate	17.10.33
	C/D	Cab Door Top Front Stiffening plate	_
	J/K	Cab Door Bottom Rear Stiffening plate	_
	L/M	Cab Door Bottom Front Stiffening plate	_
	E/F	Cab Door Centre Rear Stiffening plate	_
	G/H	Cab Door Centre Front stiffening plate	_
	N/R/P/S	Cab Door Bottom Rear Stiffening plate	_
16290	A/B	Body Frame Footplate Support	17.10.33
	C	Body Frame Footplate Support	_
	D	Rubbing (boiler rear)	_
	E	Rubbing Strip(boiler rear side)	_
	F	Platform Patch plate (rear boiler foot)	_
	G/H	Rear Boiler Foot Packing	_
16291	A/B/F	Steam Valve Cover	18.10.33
	C/G	Steam valve Cover support	_
	D	Steam valve Cover Fixing nut	_
	E	Accelerator Lever pin	_
16292	A	Arrangement of Steam Brake on Rear Axle	18.10.33
	B	Arrangement of Steam Brake on Middle Axle	_
16293	A	Camshaft Bush (timing gear end)	30.3.28
	B	Camshaft Bush(centre)	_
	C	Camshaft Bush(control boxend)	_
16294	A	RH Water Tank Top Pressing	18.10.33
	B	RH Water Tank Bottom Pressing	_
	C	LH Water Tank Top Pressing	_
	D	LH Water Tank Bottom Pressing	_
16295	A	Water Tank RH	18.10.33
	B	Water Tank LH	_
16296	A/B	Side Channel	1.11.33
	C/D	Rear Spring Channel	_
	E	Frame Cross Channel	_
	F	Frame Front Cross Channel	_
	G	Frame Cross Channel cleat	_
16297	AtoD	Bunker Side plates
	E	Top Plate Bunker end	_
	F	Bottom Plate Bunker end	_
	G	Cab Back Stiffening angle	_
	H	Cab Back Stiffening angle	_
16298	A	Bolster End Casting Bearing cap	19.10.33
	B	Flitch Plate for Diagonal(DE)	_
	C	Bolster Spring Link Silentbloc	_
	D	Bolster Spring Link	_
	F	Special Square Washer	_
	E	Thermometer Pocket boss	_
16299	A/B	Side Channel	19.10.33
	C/D	Frame Truss	_
	E/F	Frame Strut	_
	G	Brake Lever Bracket, CANCELLED	_
16300		Throttle valve body	1.11.33
16301		Arrangement of Frame	7.5.34
16302	A/B	Side Channel	7.12.33
	C	Frame Front Cross channel	_
	D	Frame Pivot channel	_
	E	Frame Inter Cross channel	_
	F	Cross Stay	_
16303	A	Tipping Cylinder Front Cross channel	11.12.33
	B/H	Tipping Cylinder Rear Cross Channel	_
	C	Tipping Cylinder Front Cross channel stiffener	_
	D	Turntable Pivot channels	_
16304	A/B	Turntable Inter and Rear CrossChannel	12.12.33
	C	Turntable Front Cross channel	_
	D	Turntable stay	_
	E	Tipping Cylinder Cross channel truss	_
16305	A	Subframe Longitude cleat	19.12.33
	B/C/N	Tipping Crosshead Cleat	_
	D/E	Tipping Cylinder Cross Channel cleat	_
	F	Pivot Channel cleat	_
	G/H	Front Cross channel cleat	_
	J	Corner angle plate	_
	K/L	Subframe Longitude Cleat	_
		Floor Support stiffener	_
16306		Tipping platform	18.12.33
16307		Arrangement of Trailer frame	18.10.33
16308		Oil Bath Chain Cases	10.10.33
16309		Arrangement of Steam Brake Piping	19.10.33
16310		Arrangement of Cab (layout)	18.10.33
16311	A/B	Chain Pinion 1-75" Pitch LH	19.10.33
	C	Cross Tube	_
16312	A	Rear Axle Layshaft Bevel	20.10.33
	B	Rear Axle Driving bevel	_
	C/D	Axle Shaft oil Gland
16313	A	Rear Stay Flange	21.12.23
	B	Tipping Pivot Locking Pin	_
	C	Rear Pivot Shaft	_
	D	Tipping Pivot pin	_
	E	Draw Bar Pin	_
	F	Drawbar Pin Handle	_
	G	Draw Bar Pin	_
16314	A	Tank Support Block (240gallon tank)	20.10.33
	B/C/F	Tank Support Block (960gallon tank)	_
	D/E	Tank End Block	_
16315	A/B/C	Cab Back Panel Assembly	23.10.33
	D	Coal Bunker door	_
	E/F/J	Coal Bunker Door guide	_
	G	Coal Bunker Door Support angle	_
	H	Strip for Support angle	_
16316		Rd Flange(welded to pipe)	20.10.33
		Flange (copper pipe turned over)	_
	C	Exhaust Pipe Flange to Elbow	_
		Round Flange(pipe turned over on spigot)	_
	E/T	Flange (male)for weir pump delivery	_
	F/U	Flange(female)for weir pump delivery	_
		Square Falnge (welded to pipe)	_
		Flange	_
16317	A	Throttle Valve Cover	2.11.33
	B	Throttle Valve	_
	C	Pilot valve	_
	D	Coupling Disc for throttle control	_
16318	A	Engine Reverse Shaft Sprocket	21.10.33
	B	Spindle Sprocket	_
	C	Outer Bearing Sprocket	_
	E	Control Box Packing piece	_
	D	Sprocket(control box)	_
	F/G	Cross over shaft bracket, (no image)	_
16319	A	Bogie Headstock Plate	23.10.33
	B	Bogie Outer Headstock Plate top angle	_
	C	Bogie Outer headstock Plate bottom angle	_
16320	A	Arrangement of Front Mudguard	23.10.33
	B	Arrangement of Rear Mudguard	_
	C	Front Mudguard Support bracket	_
	D/E	Front Mudguard Rear support	_
	F/G	Turntable Side channel	_
	H	turntable Pivot Channel support	_
16321		Arrangement of Turntable	24.10.33
16322	AtoD	Cab Door Assembly complete
	G	Injector Valve	_
	H	Injector Valve seating	_
	E/F	Cab Door Catch angle	_
16323	A/B	Cab Side Support Channel	23.10.33
	C	Boiler and tank Rear Support	_
16324	A/B	End Longitude Trailing end	22.8.33
	C/D	End Longitude driving end	_
		NOT REQUIRED	_
	E/F	Drawgear Angle	_
	G	Knee to Headstock Plate and End Longitudes	_
	H	Cleat to Follower Plate carrier	_
16325	A	Oil Box	10.11.33
	B	Oil Box Lid	_
		Oil Box Lid Pin	_
	D	Spring catch	_
		Oil Pump Rod	_
16326		Proposed Arrangement of Bolster	25.10.33
16327	A	Boiler Rear Support angle	23.10.33
	B/N	Cab Support Channel Bracket	_
	C/D/P/Q	Bumper Bracket	_
	E/F	Body Holding Down Bracket - front	_
	G/H	Door bottom Rear Stiffening plate	_
	J/K	Cab Side Coping	_
	L/M	Cab Door Coping - bottom	_
16328		Arrangement of Gear Box	12.6.33
16329
16330	A/B	End Diagonal Trailing end	25.8.33
	C/D	End Diagonal Driving end	_
	E	Solebar and Crossbar Gusset	_
	F	Crossbar and Longitude gusset	_
	G	Crossbar and Longitude gusset	_
	H	Crossbar and Longitude gusset	_
16331	A	Ibbotson's Patent Automatic Buffer	31.8.33
	B/C	Gusset to Solebar and crossbar	_
	D/E	Gusset to Solebar and crossbar	_
16332	A/B	Follower Plate Stop	23.8.33
	C	Follower Plate support	_
	F	Drawbar	_
	G	Buffer and drawbar Pin	_
	D	Buffer Spring	_
	E	Buffer Spring Ferrule	_
	H	Buffer and drawbar Pin washer	_
		NOT REQUIRED	_
16333	A/B	Inter Longitude Trailing end	1.9.33
	C/D	Cleat to Solebar and Inter Crossbars	_
	E/F	Cleat to Solebar and Inter Crossbars	_
	G	Cleat to Longitudes and Crossbars	_
	H	Stiffener to Inter Longitudes	_
	J	Stiffener to Inter Longitudes	_
	K	NOT REQUIRED	_
16334	A	Gangway Plate	5.9.33
	B	Gangway Plate hinge	_
	E	Hinge Rod Ferru	_
	F	Baseplate for handbrake Column	_
	C	Gangway Plate Hinge bracket	_
	D	Gangway Plate Hinge rod	_
	G	Headstock Gusset Driving end	_
16335
16336		Oiling and Greasing Diagram	25.10.33
16337	A	Floor Plate at Boiler	25.10.33
	B	Floor Plate at Boiler	_
	C	Gusset to Solebar and crossbar	_
	D	NOT REQUIRED	_
	E/F	NOT REQUIRED	_
	G	Butt Strip to Floor Plate	_
16338
16339	A/B	Ventilator Assembly	26.10.33
	C	Rain Deflection angles	_
	D	Rain Deflection angles (sides)	_
	E	Ventilator Plate End angles	_
	F	Ventilator Plate Distance piece	_
16340	A	Throttle Valve Cover	25.10.33
	B	Throttle Valve Cover	_
16341	A	Crossbar at Trailing End of tank	26.8.33
	B	Crossbar at Driving End of tank	_
16342	A	Inter Longitude	4.9.33
	B	Inter Longitude	_
	C	Inter Longitude	_
	D	Inter Longitude	_
16343		Arrangement of Front and Rear Axles	26.10.33
16344	A	Frame Front Pivot Bracket	26.10.33
	B	Sub-Frame Front Pivot Bracket	_
	C	Frame Rear Pivot Bracket	_
	D	Sub Frame Rear Pivot bracket	_
16345		Proposed Lay-out Main Steam and Exhaust Pipes	27.10.33
16346
16347	A	Exhaust Pipe
	B	Exhaust Pipe RHS	_
	C	Exhaust Pipe LHS	_
	D	Exhaust Pipe (engine to 2nd ball joint)	_
	E	Exhaust Pipe (1st,2nd,5th,6th engines)	_
	F	Exhaust Pipe (3rd engine)	_
	G	Exhaust Pipe (4th engine)	_
		Exhaust Pipe (1st,6th engine)	_
16348	A	Coal Bunker Bottom plate	27.10.33
	B	Coal Bunker Bottom plate(front)	_
	C/D	Bunker Bottom Plate Stiffening angle	_
	E/F	Sandbox Support plate	_
	G	Sandbox Plate Stiffening angle	_
	H	Tank Air Pipe clip	_
	J	Weir Pump Packing piece	_
16349	A to D	Cab Roof Assembly	25.10.33
	E	Cab Roof Angle (ends)	_
	F	Cab Roof Angle (sides)	_
16350	C/D	Ventilator Purlins	27.10.33
	A/B	Cover Plate to Division plate	_
	H	Stiffening Angle to back angle plate and Sandbox plate	_
	G	Stiffening Plate for Westing House Pump	_
16351	A	Steam Brake Cylinder cleading sheet	27.10.33
	B	Steam Brake Cylinder cleading sheet	_
	C	Cylinder End Cleading cover	_
	D	Cylinder End Cleading cover	_
	E	Tyre Hoist Cover (outside)	_
16352	A	Platform Centre Bearer(rear end)	30.10.33
	B to F to L	Platform Centre Bearer	_
	C	Platform Centre Bearer(front end)	_
	D/L	Platform Rear Cross bearer	_
	E/K	Platform Front Cross bearer	_
	H	Platform Centre Bearer(rear end)	_
	G	Platform Centre Bearer	_
	M	Prop Shaft Bearing End Cover joint	_
16353	A	Inter Longitude	28.10.33
	B	Inter Longitude	_
	C	Inter Longitude	_
	D	Inter Longitude	_
16354		Arrangement of Frame	28.10.33
16355	A/G/H	Release valve Chest adapter	3.11.33
	C	Throttle Valve seat	_
		Throttle valve	_
		Throttle Valve spindle	_
16356	A	Drain Valve body	27.10.33
	B	Drain Valve	_
	C	Drain Valve lever	_
	D	Drain Valve Lever bracket	_
	E	Drain Valve Control Lever	_
16357		Chart of Leading Dimensions	30.7.34
16358	A	NOT REQUIRED	26.10.33
	B	Butt Strip to Floor Plate	_
	E/F	Gusset to Longitude and Crossbar	_
	C	Headstock Plate Driving end	_
	D	Stiffener to Floor plate	_
16359	A	Fire Slicer	31.10.33
	B	Fire Slicer	_
16360		Rear Spring	31.10.33
16361
16362		Arrangement and Detail of Cowcatcher	1.11.33
16363
16364
16365
16366	A	Trailing Buffer Beam	31.10.33
	B	Leading Buffer Beam	_
	C	Buffer Plate	_
	D/E	Brake Bracket and Beam Cleat	_
	F	Arrangement of Central Buffer	_
16367	A	Special Accumulator box	1.11.33
	B	Acumulator Box Support	_
16368	A	Arrangement of Front Mudguard	1.11.33
	B/C	Front Mudguard Rear Stay	_
	D	Front Mudguard Top Stay	_
	F	Angle Head rail	_
	G	Head rail-support	_
	E/J	Side Catch Bracket	_
	H	Side Stop Plate	_
16369		Arrangement of Frame and Platform	4.11.33
16370		Side Channel for 13'-6' Platform	2.11.33
	C/D	Rear Spring Channel	_
	E	Turntable Ring(top)	_
	F	Turntable Ring(bottom)	_
	G/H	Turnatble Side channels	_
16371		Arrangement of Turntable	3.11.33
16372		Throttle Valve body	1.11.33
16373	A	Boiler Seat Plate Rear Cleat	1.11.33
	B	Leading Buffer Top angle	_
	C	Leading Buffer Bottom angle	_
	D	Trailing Buffer Bottom angle	_
16374		Oiling and Greasing Diagram	28.10.33
16375		Oiling and Greasing diagram	2.11.33
16376		Arrangement of Frame	2.11.33
16377	A	Arrangement of Turnatble	2.11.33
	B/C	Turntable Side Channel	_
	F	Turntable Rear Cross Channel	_
	D/E	Turntable Pivot channel	_
	G	Turntable Cross channel	_
16378		Throttle Valve body	2.11.33
16379	A	Blast Pipe flange	7.11.33
	B	Feedheater Bottom cover	_
	C	Blast Valve Stuffing box	_
	D	Blast Valve	_
	E	Blast Valve gland	_
16380		Arrangement of Accumulator Boxes	2.10.33
16381		Reversing Gear-box Body	8.12.33
16382		Arrangement and Detail of cab	21.4.33
16383		Arrangement and Deatil of Canopy Roof	22.5.33
16384		Canopy Roof Pressing	7.12.32
16385	A	Arrangement of Canopy Roof Sliding door	15.7.33
	B/C	Canopy Roof Sliding Door	_
	D	Guide Rail for Canopy Roof Door	_
16386		Arrangement and detail of bunker (hand stoked)	23.5.33
16387		Funnel Surround	25.3.33
16388		Footboard	4.7.33
16389		Arrangement of Axle Box	9.11.33
16390		Accumulator Box(large)	4.11.33
16391	A	Arrangement of Steam Brake	6.11.33
	B	Brake Cylinder Bracket	_
	C/D	Brake Cylinder Bracket Stay	_
	E	Steam Brake Cylinder Support plate	_
	F	Steam Brake Cylinder Support stay	_
	G	End Cross Bearer gusset	_
16392		Pin Withdrawal Gear Complete	6.11.33
16393		Accumulator Box(small)	6.11.33
16394
16395	A	Chain Case(RH)	24.10.33
	B	Chain Case(LH)	_
16396	A	Inter Crossbar	6.11.36
	B/C	Gusset to Crossbar and longitude	_
	D/E	Accumulator Box Trimmer	_
	F/G	Cleat to Accr Box Trimmer and Solebar	_
	H	Cleat to Accr Box Trimmer and Longitude	_
	J	Gusset to Crossbar and longitude	_
16397	A/B	Front Mudguard Front Stay
	C/D	Front Stay Support	_
		Arrangement of Front Mudguards	_
	F	Body Capacity plate	_
	G	Arrangement and detail of Drilling in Headboard for Body Capacity plate	_
16398	A/P/Z	1/2" Special Fitted bolt	7.11.33
	N	Side Rail Bolt	_
		Pin(sanding gear)	_
	E	Pin(for number plate support)	_
		Fitted Bolt	_
		Boiler Foot Bolt(spring loaded)	_
		Special Stud	_
		Special Stud	_
16399	A	Valve Seating for Throttle Pilot valve	19.3.34
	B	Pilot Valve Cap in Throttle valve	_
	C	Throttle Valve seat	_
	D	Throttle Valve Gland nut, CANCELLED	_
	E	Packing Gland for Throttle Valve Spindle	_
	F	Locking Plate for Throttle Gland Nut	_
		Joint Ring	_
16400	A	Chain Case Cover (RH)	7.11.33
	B	Chain Case Cover (LH)	_
	B	Bracket Suspension Plate	_
	D	Bracket Packing piece	_
	E	Chain case Cap	_
	J	Chain Case Dust Shield	_
16401	A	Accumulator Box Support Channel	17.11.33
	B	Accumulator Box Packing angle	_
	C/J	Accumulator Box Packing angle	_
	D	Accumulator Box Packing plate	_
	E/F	Strap Packing piece	_
	G	Vac Re Strap	_
	H	Vac Res. Packing piece	_
16402	A	Withdrawal Gear Shaft Bracket	7.11.33
	B	Withdrawl Gear Shaft Bracket	_
	C	Shaft Lever	_
	D	Arm Lever	_
		Corner plate	_
	G	Cylinder Fixing Bracket	_
16403	A	Boiler Foot Chock	8.11.33
	B/G	Boiler Foot Chock	_
	C	Boiler Foot Chock	_
	D/E	Boiler Foot Chock	_
16404	A	Engine Steam Pipe (trailing bogie)	10.11.33
	B	Engine Steam Pipe (trailing bogie)	_
	C	Engine Steam Pipe (leading bogie)	_
	D	Engine Steam Pipe(leading bogie)	_
	E	Engine Steam Pipe(trailing bogie)	_
	F	Engine Steam Pipe(leading bogie)	_
	G	Engine Steam Pipe(leading bogie)	_
16405	A	Exhaust Pipe Y Piece bracket	10.11.33
	B	Weir Pump Base Plate	_
		Steam Pipe(trailing bogie)	_
	D	Weir Pump Base bolt(special)	_
	E	Injector Bracket	_
	F	Cylinder Lubricator Bracket	_
16406	A	Exhaust Joint Flange	13.11.33
	B	Drain Valve Lever washer	_
	C	Exhaust Joint ring	_
	D	Blast Valve handle	_
	E	Exhaust Joint Distance Piece	_
	F	Water Level Gauge Guide cap	_
	G	Accelerator Rod Bracket	_
16407	A	Stanchion Socket Clip(centre)	13.11.33
	B	Stanchion Socket Clip(rear)	_
	C	Stanchion socket	_
	F/G	Stanchion Socket assembly(centre)	_
	D/E	Stanchion Socket Assembly (rear)	_
16408	A	Arrangement of Tailboard	13.11.33
	B	Tailboard Support	_
	C	Tailboard Cover plate	_
	D	Tailboard Cover Plate Cope Bar	_
16409	A	Arrangement of Front Mudguard	13.11.33
	B	Arrangement of Rear Mudguard	_
	C/D	Front Mudguard Stay	_
	G/H	Rear Mudguard Rear Stay	_
	E/F	Rear Mudguard Front stay	_
	J	Drawbar	_
16410		Reversing Gear Extension box	20.10.33
16411	A	Extension Box (rev:gear)	4.10.33
	B/F	Extension Box Cover (front)	_
	C/G/H	Extension Box Cover (hind)	_
	D	Extension Box Shaft	_
	E	Extension Box Cover plate	_
16412		Reversing Gear-box Body Cover	8.12.33
16413	A	Adjusting Box Sprocket	12.10.33
	B	Extension Box Sprocket	_
	C	Reversing Gear-wheel	_
	D	Sprocket (column reverse shaft)	_
	E	Reversing Gear wheel	_
	F	Idler Wheel(rev gear)	_
16414		Arrangement of Reversing Gearbox	17.11.33
16415	A	Sprocket Housing	11.10.33
	B	Chip Shield (adjusting box)	_
	C	Adjusting Box Cover Plate	_
	D	Chip Shield(adjusting Box)	_
	E	Adjusting Box Sprocket Shaft	_
	F	Sprocker Housing slide	_
	G	Sprocket Hosuing slide Pin	_
16416		Reversing Gear Adjusting Box	10.10.33
16417		Arrangement of Reversing Gear Adjusting box	21.12.33
16418	A/B	Body Side Plate angles 1st	14.11.33
	C/D	Body Side Plate angles 2nd	_
	E/F	Body Side Plate angles 3rd	_
	G	Side Plate Angle Gusset plate	_
	H/K	Angle for Body and Boiler clothing	_
	J	Boiler Clothing Strap end	_
	L	Bar on Air Door	_
16419		Arrangement of Injector	15.11.33
16420		Arrangement and Detail of Tipping Platform	15.11.33
16421	A	Lubricator Cover Joint	15.11.33
	B	Tipping Cylinder Bottom Cover Joint	_
	C	Patent Nameplate	_
	D	Inspectors Boiler Nameplate	_
	E	Lubricator Nameplate	_
	F	Spark Arrester Nameplate	_
	G	Gear Change Index Plate	_
16422		Oil Fired Boiler	16.11.33
16423
16424	A/B	Headboard Support	16.11.33
	C/D	Headboard Protection plate	_
		Floor Protection strip	_
	F	Bolster Socket	_
	G/H	Headboard Protection plate	_
	L	Rear Tipping Cylinder Cross Channel Truss, NEVER USED	_
16425	A	Tipping Side hinge, NEVER USED	16.8.33
	B/C	Platform Rear Corner angle, NEVER USED	_
	D/E	Platform Front Corner angle	_
		Skid bar	_
	H	Tailrail support	_
16426	A	Throttle Lever Spindle LH	1.3.34
	B	Throttle Lever Spindle RH	_
	C	Reversing Crank Handle	_
	D	Handle Spindle	_
	E	Bearing Spindle	_
	F	Spindle Nut	_
16427		Body Side plates	16.11.33
16428		Arrangement of Lubricator Drive	16.11.33
16429	A	Arrangement of Front Mudguard	16.11.33
	B	Arrangement of Rear Mudguard	_
	C	Front Mudguard Support bracket	_
	E	Body Capacity plate	_
	D	Rear Mudguard Support bracket	_
	F	Arrangement and deatil of drilling in Headboard for body capacity plate	_
16430	A	Weir Pump Base Plate stay	21.11.33
	B	Injector Overflow pipe	_
	C	Axlebox Cap Felt Ring Housing	_
	D	Lubricator Driving pin	_
	E	Lubricator Connecting Rod end washer	_
	F/H	Lubricator Connecting Rod Jaw	_
	G/H	Lubricator Connecting rod	_
16431	A	Side Knee	17.11.33
	B	Side Support	_
	C	Bearer Fixing Support	_
	D	Gusset Plate	_
	E	Front Support bow	_
	F	Front Support bow	_
16432		Arrangement of 15"-3" tilt van body	16.11.33
16433		Arrangement of 18"-0" Tilt Van Body	16.11.33
16434	A	Tank Wedge Bracket	17.11.33
	B	Tank Wedge Block	_
	C	Tank Wedge	_
	D	Turbine Generator Support plate	_
	E	Turbine Generator support bracket	_
	F	Turbine Generator Support bracket	_
16435	A	Arrangement of Rear Mudguards	22.12.33
	B	Arrangement of Front Mudguard	_
	C/D	Mudguard stay	_
		Mudguard stay	_
		Rear Mudguards	_
		Front Mudguard	_
16436		Arrangement and detail of Frame	24.11.33
16437		Side Rail Enamel Plates	17.11.33
16438		Arrangement and Detail of tarpaulin sheet	18.11.33
16439		Arrangement of Boiler, Funnel and Ashpan gear	3.10.30
16440	A/B	Body Side Screen Plate	17.11.33
	C/D	Screen Plate beading	_
	E/F	Joint Strip(screen plate to body side)	_
	G/H	Filling Up plate	_
	J/K	Top Plate Support angle	_
	L/M	Side Plate to Screen angle	_
	N	Angle to Filling up plates	_
	P	Packing strip	_
16441		Arrangement showing Exhaust Pipe Joint at exhaust box	1.12.33
16442		Sentinel Patent Water Tube Boiler	20.11.33
16443		Arrangement and Detail of Tarpaulin Sheet	20.11.33
16444		Arrangement of 17"-0" Body with Bows and Rails	21.11.33
16445	A	Tarpaulin Bow - front	22.11.33
	B	Tarpaulin Bow - rear	_
	C	Tarpaulin Bow - centre	_
	D	Tailboard Plate	_
16446	A	Driving Shaft Thrust BRG Housing	20.11.33
	B	Driving Shaft Thrust BRG Gland	_
	C	Steam Brake Pedal lever	_
	D	Steambrake Pedal Bracket	_
16447	A	Rev. Gear Box Cover(main shaft)	21.11.33
	B	Chain Case Strap end	_
	C/N	Chain Case Strap	_
	O	Chain Case Strap end	_
	D	Rev. Gear Chain Case arrangement	_
		Rev. Gear Chain Case (LH)	_
		Rev. Gear Chain Case (RH)	_
16448		Control Column Base	22.11.33
16449	A	Tailboard Cope bar	23.11.33
	B	Tarpaulin Rail	_
	C	Tarpaulin Rail bracket	_
	E	Brake Valve Gland Keep	_
	D	Speedometer Drive bracket	_
16450		Angle and Joint Strips for Body	23.11.33
16451	A/B	Rear Corner angle	22.11.33
	C/D	Front Corner angle	_
	E	Binding Plate	_
	F/G	Headboard Side angle	_
	H	Extension Slides(ends)	_
	J	Back Plate	_
	K	Distance piece	_
	L	Centre Slide	_
16452	A/B	Frame Side Channels	24.11.33
	C/D	Rear Spring Channel	_
	E/F	Turntable Side channel	_
	G	Arrangement of Front Mudguards	_
16453	A	Arrangement of Turntable	25.11.33
	B/C	Rear Spring Channel	_
	D	Steam Cylinder Support bracket	_
	E	Steam Brake Cylinder bracket	_
16454		Arrangement of Trailer Frame	23.11.33
16455	A	Draught Excluding Plate(blast box)	22.11.33
	B	Draught Excluding Plate(blast box)	_
	C	Patch Plate(front Tank Drain Pipe)	_
	D	Footstep	_
	E	Rear Boiler Foot Fixing Arrangement	_
	F	Platform Patch Plate	_
	G/H	Patch Plate (front tank level pipe)	_
16456
16457		Throttle Valve Rod	25.11.33
		Throttle Valve jaw	_
	D	Throttle Rod Lever	_
	E/M	Throttle Gear Lever	_
	F/G	Throttle Gear Spindle	_
	H	Throttle Lever pin(in column)	_
16458	A	Top Plate Support angle	23.11.33
	B	Top Plate Support angle	_
	C	Top Plate Joint Strip	_
	D/E	Top Plate Support angle	_
	F	Top Plate Joint Strip	_
	H	Top Plate Support angle	_
	J	Top Plate Support angle	_
	K	Packing Strip for Top Door	_
16459
16460		Body Top Plates	24.11.33
16461		Arrangement and Detail of Frame	1.2.34
16462	A/B	Platform Front Corner angle	28.11.33
	C/D	Headboard Side angle	_
	E/F	Tailboard Hinge	_
	G	Tailboard End Protection plate	_
	H	Tailboard Centre Washer Plate	_
	J	Tailboard Outside Washer plate	_
	K/L	Platform Rear Corner angle	_
16463		Body Beading, Clothing Belts	27.11.33
16464	A/B	Boiler Clothing plate	27.11.33
	C/D	Boiler Clothing plate	_
	E/F	Boiler Clothing plate	_
	G	Clothing Plate Beading	_
	H	Clothing Plate Beading	_
16465		Railbus Boiler	29.12.33
16466	A	Extra Drilling and Cuts in Side and Front channel	28.11.33
	B	Special Cleat and Steering Gear Case support	_
	C	Steer Gear Case Support	_
	D/E	Front Mudguard Rear Stay	_
	F	Arrangement of front Mudguards	_
16467		Safety Valve Body	28.11.33
16468	A	Suction Bend	21.11.33
		Flange (square)(Male)	_
		Flange (square)(Female)	_
		Round Flange	_
16469		Arrangement of Oil Pump Drive	25.11.33
16470		Oil Pump Bracket	4.12.33
16471	A	Safety Valve Flange	29.11.33
	B	Thermofeed Regulator Float Chamber, CANCELLED	_
	C	Gear change Index plate	_
	D	Reversing Index plate	_
16472	A/B	Stiffening Ring for tank Filling Hole	29.11.33
	C	Top Plate Joint strip	_
	D/E	Filling Up Plate between Tank (front) and body	_
	F/G	Body Angle to Filling Up Plate	_
	H	Joint Strip	_
	J	Angle to Roof	_
	K/L	Air Door and Beading	_
16473		Arrangement of End of Underframe	10.1.34
16474		Proposed 6/7 Ton Trailer with 11 1/2" side rails	29.11.33
16475		Alteration to frame 6417	30.11.33
16476
16477		Arrangement of Frame and Platform	1.12.33
16478	A/B	Side Channels	1.12.33
	C	Arrangement of Rear Mudguard	_
	D/E	Rear Mudguard Front support	_
16479		*text missing*	1.12.33
16480	A	Cover plate on Control Column	8.12.33
	B	Bearing Distance piece	_
	C	Vac. Cross Shaft End (RH)	_
	E	Special Nut	_
	D	Vac. Cross Shaft end (LH)	_
	F	Reverse Shaft End Spindle	_
		Set Pin (throttle lever)	_
16481	A/B	Canopy Wing Enamel Plate	4.12.33
	C/D	Canopy Door Enamel Plate	_
	E/F	Platform Side Rail Enamel Plates	_
16482	A	Gearbox Oil Make-up Pipe	4.12.33
	B	Oil Return Nipple	_
	C	Gear Box Oil Make-up nipple	_
	D	Oil Sump Cock apator	_
	E	Oil Return Pipe	_
	F	Lubricator Check Valve Body	_
	G/H	Oil Return to Sump pipe	_
16483
16484		Boiler development	5.12.33
16485
16486	A	Support for Auxiliary Air res.
	B	Support for Main Air res.	_
	E	Bracket Supporting Steam Pipes (LHS)	_
	F	Bracket for Weir Pump Exhaust	_
	C	Band for Main Air Res.	_
	D	Band for Auxiliary Res.	_
	G	Water Pipe Clip	_
	H	Band for Equalising res.	_
16487	A	Air Pipe Carrier Near Triple Valve on Rear of Loco
	B	Air Pipe Carrier Near Triple Valve on Front of Loco	_
	C	Bracket to Steady Drip-Cup on Air Pipe	_
		Clips	_
	F	Air Pipe Carrier on Boiler frame	_
	G	Air Pipe Carrier on Boiler frame gusset	_
16488		Bracket	15.12.33
	B	Bracket carrying Release valve	_
	C	Steam Ball Support	_
		Clips	_
	G	Packing piece	_
	H	Brake return spring	_
16489		Arrangement of Sanding Gear (hand)	5.2.35
16490	A	Pipe Support(on boiler platform)	27.10.33
	B	Steam Stand Bracket	_
	C/M	Boss to carry Stop-Valves(16092C)	_
	D	Boss to carry Thermometer conn	_
	E	Bracket to carry Levelling pipe	_
	F	Steam Pipe Carrier	_
		Steam Pipe clip	_
	H	Boss to carry Westing House Pump exh	_
16491	A	Water Tank Filler	5.12.33
	B	Tank Filler Lid hinge	_
	D/E	Tank Strap(special)	_
16492	A	Oil Pump Eccentric Cover	6.12.33
	B	Oil Pump Eccentric	_
	C	Oil Pump Eccentric Housing	_
	D	Oil Pump Eccentric disc	_
	E	Lubricator Drive bush	_
	F	Oil Pump Eccentric rod	_
16493		Arrangement and detail of Saloon Type canopy	13.5.32
16494	A	Hinge Bar	6.12.33
	B/C	Front Corner plate	_
	D/E	Rear Corner plate	_
	F	Headboard End protection plate	_
	G/L	Side End Protection plate (front end0	_
	H	Side End Protection plate (rear end)	_
	J	Tailboard End protection plate	_
	K	Platform End Protection angle	_
16495	A	Tank Internal Suction pipe	8.12.33
	B	Tank Internal Suction pipe	_
	F/L	Water Filter Suction pipe flange	_
	G/K	Tank Packing block	_
		Steady Block(tank)	_
	E	Water level Cock Adaptor (tank)	_
	H	Suction Pipe flang	_
		Plug Cock Stiffening ring	_
16496	A	Arrangement showing Alteration to Tank Fittings, SD	7.12.33
	B	Tank Filling Tube flange	_
	C	Padlock Peg	_
	D	Tank Filling Tube flange	_
	E	Tank Filling Hole Cover Boss	_
	F	Water Level Gauge guide	_
	G	Water Level Gauge guide	_
16497		Water Tank for Three Way Tipping waggon	14.11.23
16498	A	Arrangement of Rear Mudguards	8.12.33
	B	Rear Mudguard Stiffening plate	_
	C	Rear Mudguard Front stay	_
	D/E	Rear Mudguard Rear Stay	_
	F	Ramp Support bracket	_
	G/H	Ramp Support bracket	_
16499	A	Arrangement of Side Rail and Cope bar	8.12.33
	D/E	Side Rail Cope bar (rear bottom)	_
	F/G	Side Rail Cope Bar (front bottom)	_
	B/C	Side Rail Cope bar (top)	_