Drawing No				Description		Date
	15500	A/B	Side End Protection plate		22.3.33
		C	Headboard Centre Channel		_
		D/E	Headboard Side angle		_
		M	Headboard Centre channel		_
			Body Side Knee		_
	15501	A	Hoisting Engine sprocket		22.3.33
		B	Tar Pump sprocket		_
		C	Arrangement Drain Hose Pipe support		_
		D	Drain - Hose Pipe support angle		_
		E	Gusset for Drain Hose support		_
		F	Drain Hose Support bracket		_
		G	Drain Hose Support pin		_
	15502	A/B/C	Ashpan, DG tar sprayer		23.3.33
		D	Arrangement of Vacuum Breaker		_
		E	Ashpan Hook Backing Plate		_
		F	Ashpan Hinge Backing plate		_
		G	Ashpan Drain Strainer plate		_
	15503	A	Sprayer Operating Lever bolt		23.3.33
		B	Sprayer Operating Lever bolt		_
		C	Sprayer Operating Rod peg		_
		D	Fulcrum Bolt		_
		E	Main Bearing Stud		_
		F	Main Bearing Cover bolt		_
		G	Reversing Pawl rod		_
		H	Quadrant Bracket stud		_
	15504
	15505		Arrangement of Sprayer Operating Gear		23.3.33
	15506	A	Baffle Plate, SI loco		24.3.33
		B	Baffle Plate support, SI loco		_
		C	Aux. Baffle plate		_
		D	Baffle Plate clip		_
			Distance pieces		_
		L	Arrangement of Baffle Tyre Spark Arrester		_
	15507	A	Tar Spray Shield Top and Side Plate angle		24.3.33
		B/C	Tar Spray Shield extension angles		_
		D/J	Tar Spray Shield - pipe clip		_
		E	Tar Spray Shield Nozzle plate		_
		G/K	Tar Spray Shield Pipe Clip packing block		_
		F	Pipe Clip Stiffener		_
		H/L	Tar Spray Shield Side plate hooks		_
	15508	A/B	Body centre catch		24.3.33
		C	Body Centre Ctach boss		_
		D	Body centre catch bracket		_
		E	Catch Bracket Packing piece		_
		F	Centre Catch Safety link		_
		G	Safety Link Spindle		_
		H	Centre Catch plate		_
	15509	A	Arrangement of Ladder and Platform		24.3.33
		B/C	Ladder Side		_
		D	Platform Support		_
		E/F	Platform Support Tie bar		_
		G/H	Ladder Support bracket		_
	15510		Cylinder head		24.3.33
	15511	A	Tank Support Flitch plate		24.3.33
		B	Engine and Pump Support channel (front)		_
		C	Engine and Pump Support channel (rear)		_
	15512
	15513	A	Tar Spray Shield Canvas Side Flaps		27.3.33
		B	Tar Spray Shield Canvas Side Flaps		_
		C	Tar Spray Shield Canvas Extension Flaps		_
		F/G	Drain Pipe clip		_
		E	Operating Gear support stay		_
	15514		Funnel Base, SD waggon		3.4.33
	15515		Arrangement of Safety Valve, railbus		27.3.33
	15516	A	Distributor Pipe clip		28.3.33
		B/J	Operators Platform bracket		_
		C	Steam Trap Front bracket		_
		D	Tail lamp Bracket		_
		E/L	Pump Suction Cock Lever boss		_
		F	Pump Suction Cock Lever		_
		G	Nozzle Support stay		_
		H/K	Nozzle Spindle bearing		_
	15517	A	Flitch Plate Cross channel		27.3.33
		B/C	Cross channel cleats		_
		D/E	Spray Gear Suspension stay		_
		F	Pump Support cross bracket		_
		G	Spray Gear Cross stay		_
		H/J	Spray Gear Support channel		_
	15518	A	Steam Branch		28.3.33
		B	Camshaft Bush - pump end		_
		C	Camshaft Bush - gearbox end		_
	15519	A	Arrangement of Modifications for Tach mr Drive		28.3.33
		B	Tachometer Drive barcket		_
		C	Tachometer driving pin		_
		D	Tachometer Drive bracket stud		_
		E	Engine Drain valve		_
		F	Drain valve Operating lever		_
	15520		Reflex Water gauge		3.5.33
	15521		Electrical Water level indicator		14.7.33
	15522	A	Air Compressor End stay		3.4.33
		B	Stabiliser bracket		_
		C/H	Air Compressor End side stay		_
			Tank strap		_
		G	Tank strap		_
	15523		Superheater Header LH (as drawn) and RH		6.4.33
	15524		Arrangement of Bolster		28.4.33
	15525
	15526	A	Bolster Cross channel (rear end)		28.3.33
		B	Bolster Top Gusset		_
		C	Bolster Centre gusset		_
		D	Bolster Top Gusset angle		_
		E	Top Side Friction plate		_
		F	Bolster Pivot channel		_
	15527	A	Bolster Channel Side cleat		29.3.33
		B	Bolster Channel angle cleat		_
		C	Centre Pivot Dust cover		_
		D	Centre Pivot pin		_
		E	Centre Pivot pin cotter		_
		F	Top Gusset at Cr Cross stay		_
		G	Top Gusset at Cross Stay - inter		_
		H	Top Gusset at Cross stay - end		_
	15528	A	Combined Balst and Blower pipe		5.4.33
		B/C	Blast pipe bend, CANCELLED?		_
	15529	A	Battery Plate		29.3.33
		B/E	Battery Plate		_
		C	Brake Torque Rod cap		_
		D	Brake Camshaft Lever (steam)		_
	15530	A	Top Platform Front support		29.3.33
		B/C	Top Platform Rear supports		_
		D	2" CI Std Fullway (ovalway) main cock 9fro return pipe)		_
		E/F	3" Std Three Way Main Cock		_
		G/H	Hot Air pipe bend flange		_
		J	Tank angle band		_
	15531		Arrangement of Rear Mudguards, Tank fixing and Side Trays and modifications to frame for same		29.3.33
	15532		Funnel Surround		29.3.33
	15533	A	Steam Brake Valve body		29.3.33
		B	Steam Brake Pedal Bracket		_
		C	Steam Brake pedal		_
	15534		Clamp for Pump Plunger and Stuffing Box Gland Nuts (steam feed water pump)		29.3.33
	15535		Arrangement of Sanding Gear Driving end		30.3.33
	15536	A	Control Valve Clutch Fork		29.3.33
		B	Clutch Connecting Rod		_
		C	Pawl cut Out Connecting rod		_
		D	Control Valve Shaft lever		_
		E	Control Valve Shaft lever		_
		F/H	Control Valve Shaft		_
		G	Control valve support		_
	15537		Arrangement of tar Tank and Spraying gear		30.3.33
	15538		Arrangement and Detail od delivery pipe (suction)		31.3.33
	15539	A/B/P/Q	Rear Mudguard Front rear halves		31.3.33
		C/D	Rear Mudguard Stay		_
		E	Rear Mudguard Stay		_
		F/G	Rear Mudguard Stay		_
		H/J	Front Mudguard, front half		_
		K/L	Front Mudguard, rear half		_
		M/N	Front Mudguard stay		_
	15540	A/B	Front Mudguard Rear Half Stay		31.3.33
		C	End Cross Channel cleat		_
		D/E	Bulb Angle and Cross channel cleat		_
		G	1/2" Whit Plug		_
		F	Modification of Sub - frame		_
		H	Pulley hanger		_
		J	3/4" BSP plug		_
	15541	A	Crankcase End Cover (gear box)		31.3.33
		B	Stoker Drive worm		_
		C	Layshaft gear		_
		D/F	Auxiliary Spiral Gear - driver		_
		E	Layshaft Thrust Washer		_
	15542	A	Exhaust Box		31.3.33
		B	Exhaust Box Top Cover		_
		C	Tube for Exhaust Flange		_
		D	Exhaust Flange		_
		E	Boss for Exhaust Box		_
	15543	A	Body Side Stanchion		31.3.33
		B	Aux. Bunker Knee		_
		C/D	Aux. Bunker Tie bar		_
	15544	A/B	Stiffening angle (lower)		20.3.33
		C/D	Cross bracing (end)		_
		E/F	Cross Bracing (centre)		_
		G	Truss Gusset (end)		_
		H	Truss Gusset (centre)		_
		J/K	Vertical Strut (intermediate)		_
		L/M	Vertical Strut (centre)		_
	15545	A/B	Main Frame Truss (front), 200HP railbus		17.3.33
		C/D	Main frame Truss (rear)		_
		E/F	Truss End Bracing		_
		G	Stiffening angle (top)		_
		H/J	Frame Stiffening plate		_
	15546	A	Drilling in Frame for Steam Brake Pedal Bracket and stay		31.3.33
		B	Steam Brake Pedal pin		_
		C	Brake valve Spindle cap		_
		D	Steam Brake Valve body stay		_
		E	Water Level Gauge float		_
		F	Water Level Gauge stem		_
		G	Water Level Gauge guide		_
	15547	A	Loader piston, DG6P		3.4.33
		B	Loader Cylinder cover		_
		C	Loader Piston ring		_
	15548
	15549	A	Rear Wheel Hub cover		3.4.33
		B	Oil Thrower leather		_
		C	Oil Thrower		_
		D	Roller Bearing Distance piece		_
		E	Tipping Rear Pivot		_
		F	Reversing Rod end		_
		G	Hand Brake Shaft bracket back plate		_
	15550		Sandbox (engine end)		3.4.33
	15551		3/4" Spaced Conical Grate		3.4.33
	15552	A	Tipping Platform Rod collar		3.4.33
		B	Dynamo Cover		_
		C	Dynamo Cover bolt		_
		D	Steering Gear Casing packer		_
	15553	A	Firegrate Thimble		3.4.33
		B	Firegrate Thimble Trunnion		_
		C/H	Firegrate Trunnion angle (front)		_
		D	Firegrate Operating Gear Quadrant		_
		E	Quadrant Packing plate		_
		F	Catch Pin Bracket		_
		G	Operating Lever end		_
	15554	A/J	Firegrate Operating lever		3.4.33
		B	Lever Fulcrum Bracket		_
		C	Rear Trunnion Bracket		_
		D	Firegrate operating Rod		_
		E	Firegrate Quadrant plate		_
		F	operating Lever Fulcrum pin		_
		G/H	Operating Rod catch pin		_
	15555	A	Sand Valve seat		3.4.33
		B	Sand Valve seat		_
		C/G	Sand Pipe Flange		_
		D	Catch for Sand Box lid		_
		E	Sand Box Support (rear)		_
		F	Sandbox Support bracket		_
	15556	A	Drivers Shield Clip bracket		4.4.33
		B	Drivers Shield Clip		_
		C	Drivers Seat Packing piece		_
		D	Sand Deflecting plate		_
		E	Lamp Bracket (reversing indicator)		_
		F	The Stiffener to Diagonals DE		_
	15557	A	Sand Valve Spindle (long)		4.4.33
		B	Sand Valve Spindle (short)		_
		C	Sandbox Pillar bracket		_
		E	Firegrate Trunnion pivot (short)		_
		D	Sand Valve Coupling rod		_
	15558	A	Sand Box Lid		4.4.33
		B	Special Nut		_
		E	Sand Pipe (upper)		_
		C/D	Sand pipes - driving end		_
		F/G	Sand pipes - trailing end		_
	15559	A	Reflector plate		4.4.33
		B	Gauge Glass deflector		_
		C	Boiler Pressure Gauge bracket		_
		D	Tank Buffer - front		_
		E	Tank Buffer - rear		_
	15560		Steam Camshaft
	15561	A/B	Brake Shoe Spring nut		5.4.33
		C	Brake Shoe Spring collar		_
		D	Brake Shoe Spring rod		_
		G/N	Spring Pad locating pin		_
		F	Rear Axle Pivot pin		_
			Rear Axle Casing Top and Side cover		_
		J	Rear Axle Casing Dowel		_
	15562		Boiler top (2" - 8 1/2" dia boiler)		5.4.33
	15563		Boiler Top ( 2" - 8 1/2" dia boiler)		18.4.33
	15564	A	Boiler Top 2" - 4 1/2" dia boiler		25.4.33
		B	Boiler Top 2" - 4 1/2" dia boiler		_
	15565	A	Superheater Steady Plate, SD waggon		5.5.33
		B	Superheater Steady Plate, SD waggon		_
		C	Superheater Steady Plate, SD waggon		_
		D	Superheater Steady Plate, SD waggon		_
		E	Arrangement of Special Rear Cross channel		_
	15566		Rear Bogie Axle Loader cylinder		5.4.33
	15567	A	Side o Tailboard Hinge		5.4.33
		B/C	Pulley Rope Guard		_
		D	Fixed Side Support		_
		F/G	Side Front catch bracket		_
		E	Body Side Dowel plate		_
	15568	A	Spark Arrester Vanes		5.4.33
		B	Drilling of Spark Arrester Distance piece		_
		C/D/E	Number Plate support		_
		F	Tyre Strap Cleat		_
		G/H	Auxiliary Bunker cleat		_
	15569	A	Steering Arm RH		6.4.33
		B	Steering Drop Lever		_
		C	Front Roller bracket		_
		D	Steering Gear ball		_
	15570		Arrangement of Loader and extra Drilling in frame		10.4.33
	15571
	15572		Arrangement of Sanding Gear Trailing end		8.4.33
	15573		Auxiliary Drive casing		10.4.33
	15574	A	Silencing cone		10.4.33
		B	Aux. Steam nozzle		_
		C	Funnel distance set pin, CANCELLED		_
		D	Spark Arrester vanes, CANCELLED		_
	15575	A	Control Box - bottom half		10.4.33
		B	Control Box - too half		_
	15576		Arrangement of Firegrate trunnion		10.4.33
	15577	A	Bolster Swing Link cradle		10.4.33
		B	Bolster Swing Link		_
		C	Spring link bracket		_
		D	Bolster Spring stop (top)		_
		E	Bolster Spring Stop (bottom)		_
		F	Bolster Swing Link cotter		_
	15578		Half Firegrate		6.4.33
	15579		Sand Box (tank end)		11.4.33
	15580	A/B/G/H	Cab Support channel		11.4.33
		C	Frame rear Gusset plate		_
		D	Torque Bracket Channel stay		_
		E/F	Torque Bracket Channel		_
	15581	A	Valve Spindle Bottom bearing		11.4.33
		B	Valve Hand lever		_
		C	Sand Valve Operating lever		_
		D	Valve Hand Lever guide		_
		E	Sand Connecting Rod end, NOT REQUIRED		_
		F/G	Sand Connecting rod		_
	15582	A	Tank Rear Support		11.4.33
		B	Tank Rear Support		_
	15583	A/B	Sand Pipe bracket		11.4.33
		C	Sand Pipe clip		_
		D	Sand Valve Spindle stop		_
		E	Sand Valve Spindle		_
		F	Reversing Weighshaft collar		_
	15584	A	Chain Pinion nut		11.4.33
		B	Dynamo Support bracket cleat		_
		C	Dynamo Support bracket cleat		_
		D	Dynamo Chain Safety bracket		_
		E	Dynamo Driving sprocket		_
		F	Arrangement of Dynamo drive		_
	15585
	15586
	15587		Control Gear Details		12.4.33
	15588		Arrangement of Frame and Platform		12.4.33
	15589	A	Cam Follower Guide dog		12.4.33
		B	Cam Follower guide		_
		C	Valve guide		_
		D	Wrist Pin bush Set pin		_
		E	Engine Suspension link		_
	15590	A/H	Collector pipe clip		13.4.33
		B	Tail Lamp bracket		_
		C	Canvas Bottom Support strip		_
		D	Canvas Side Support strip		_
		E	Canvas Centre Support strip		_
		F	Arrangement of Supports for End Canvas		_
		G	End Canvas Flaps		_
	15591		Arrangement and detail of frame		17.5.33
	15592		Arrangement and detail of frame		20.4.33
	15593	A	Arrangement of Firedoor, 200Hp geared car (woolnough)		28.4.33
		B/C	Firedoor Inner Top plates		_
		D	Firedoor Inner Bottom plates		_
		E	Firedoor Baffle plate		_
		F	Firedoor outer plate		_
	15594	A	Nozzle operating gear support		12.4.33
		B/C	Nozzle Operating Gear Extension support		_
		D/J	Nozzle Handle		_
		E	Nozzle Operating gear lever		_
		F	Operating Lever pin		_
		G	Nozzle Operating Spindle		_
		H	Nozzle Operating Spindle end		_
	15595		Crankshaft, SD waggon - 4 cylinder engine		20.10.32
	15596	A	Cleaning Valve adaptor		18.4.33
		B/C	Fulcrum Lever		_
		D/E/F	Lifting lever		_
		G/H	Stop Plate		_
		J	Boiler Top Dog		_
		K	Valve seat		_
		L	Valve Locking plug		_
	15597		Arrangement of 5 1/2" x 6" Single Acting Four cylinder engine		9.5.33
	15598	A	Coupling Chain Guard		19.4.33
		B	Coupling Chain Guard Angle		_
		C	Coupling Chain Guard Bottom plate		_
		D/F	Chain Guard Support bracket		_
		E/G	Chain Guard Support bracket		_
	15599	A/B	Bunker chute		19.4.33
		C/D	Bunker Chute Extension		_
		E	Chute Extension hinge pin		_
		F	Tailboard Vertical Cope bar		_
		G	Side Rear End vertical cope bar		_
		H	Funnel Stay clip		_
	15600	A/J/K	Steering Spindle		19.4.33
		B/H	Push Rod adjuster		_
		C	Push Rod Sprocket		_
			Valve Push Rod		_
		F	Push Rod End		_
		G	Feed Pump Cylinder end cap nut		_
	15601		Arrangement of Operating gear		19.4.33
	15602
	15603	A/G	Driving Chain Guard		20.4.33
		B/J	Driving Chain Guard angle		_
		C/K	Driving Chain Guard bottom plate		_
		D/H	Chain Guard Support bracket		_
		E	Axle Box Oil Filling pipe		_
	15604		Brake Shoe, SD waggon		20.4.33
	15605	A	Brake Cylinder bracket		20.4.33
		B	Brake lever		_
		C	Brake lever		_
		D	Brake Lever Link		_
		E	Brake Pull Rod		_
		F/G	Brake Lever support		_
		G	Brake Rod support		_
	15606		Funnel Surround		29.3.33
	15607	A	Steam Cock adapter		21.4.33
		B	Steam Cock Operating lever		_
		C	Rope Guide Bracket		_
		D	Rope Guide bracket		_
		E	Rope Guide		_
		F	Rope Guide		_
		G	Steam Cock Operating lever		_
		H	Steam Cock Operating lever		_
	15608		Arrangement of Chain Guards		23.4.33
	15609	A	Brake Rod Coupling		21.4.33
		B	Pull Rod Jaw		_
			Pull Rod		_
		D	Pull Rod		_
		E	Throttle Lever pin LHS		_
		F	Lever in Control Column (throttle)		_
		g	Special Coupling spider		_
	15610	A	Tyre Hoist Gear bracket		21.4.33
		B	Hoist Arm Bottom bracket		_
		C	Hoist Arm Top bracket		_
		D	Tyre Hoist Drum		_
	15611		Arrangement and detail of Cab, Sd waggon		31.4.33
	15612	A	Brake Cam		21.4.33
		B	Brake Camshaft Lever		_
		C	Brake Camshaft Lever		_
	15613		1 1/8" Double Improved High lift lever and Spring loaded safety valve		11.5.33
	15614	A/B/C	Firegrate Trunnion angle (A), Front Support angle (B) and Rear Support angle ( C ), CANCELLED		22.4.33
		D	Trunnion Cross angle end		_
		E	Angle cleat		_
		F/G	Trunnion Support barcket, CANCELLED		_
		H	Front Support bracket , CANCELLED		_
	15615		Arrangement of Vacuum brake gear		24.4.33
	15616	A	Ferrule for Bogie Frame Cross ties		24.4.33
		B	Sole Plate Stay tube		_
		C	Bogie Frame Cross ties		_
		D	Horn Stay Distance piece		_
		E	Slipper Plate for Axle Box slides		_
		F	Bolster Side Play stop		_
		G	Rubber Pad for Bolster Side play stop		_
		H	Bolster Spring clip		_
	15617	A	Tyre Hoist arm		25.4.33
		B	Tyre Strap		_
	15618	A	Hoist Arm Collar		25.4.33
		B/C/J/K	Tyre Strap Steady bracket		_
		D	Tyre Hoist cover		_
		E	Top Bracket plate		_
		F	Tyre Hoist stay		_
		G	Tyre Hoist support		_
		H	Bearing bracket		_
	15619	A	Alteration to existing Firedoor trunnion		13.5.33
		B	Alteration to Firedoor Top Frame angle		_
		C	Firedoor Top Frame		_
		D	Firedoor Top Frame Protection plate		_
		E	Arrangement of Firedoor Top frame etc		_
		F	Firedoor trunnion Cover packing piece		_
	15620		Arrangement of Hinged tailboard with stays		24.4.33
	15621		Arrangement and detail of frame		25.4.33
	15622	A	Layshaft		25.4.33
		B	Main bearing Stud Locking plate		_
		C/D	Cylinder drain pipe		_
		E	Cylinder drain pipe - end		_
		F	Cylinder Drain pipe connection		_
		G	Feed Pump Ecc. Strap		_
	15623	A	Tailboard Hinge		25.4.33
		B	Side Stanchion		_
		C	Dowel Pin		_
		D	Dowel Pin guide		_
		E/F	Side Rear End protection plate		_
		G	Side vertical Cope bar		_
	15624		Main Steam pipe (stop V. to engine)		25.4.33
	15625	A/B/J/K	Brake Camshaft Lever		4.5.33
		C/H/M/L	Brake Camshaft Lever		_
		D/E	Brake Camshaft Lever		_
		F/G	Brake Camshaft Lever		_
	15626	A/B/C/D	Firegrate Trunnion Cross angle (A), Cross angle (B), Side Support LH ( C ), Side Support RH (D)		25.4.33
		E	Angle Cleat		_
		F/G	Trunnion Support bracket L/RH		_
		H	Front Support bracket		_
		J	Cap nut		_
	15627	A	Main Bearing Cap - inter		26.4.33
		B	Main Bearing cap		_
		C/F	Main bearing Cap cover		_
		D	Camshaft End Cover (top rear)		_
		E	Safety valve lever		_
	15628		Axle Box slides		26.4.33
	15629	A	Arranegement of hand Spray		26.4.33
		B	Hand Spray Pipe		_
		C	Pressure Gauge adapter		_
		D	Distributor pipe flange		_
		E	Special Nipple for Hand Spray pipe		_
		F	Wash Down Hose Pipe bracket		_
	15630	A	Axle Shock Absorber beam
		B	Spring Link Rocking washer		_
		C	Auxiliary Spring housing		_
		D	Shock Absorber Spring bolt washer		_
		E	Shock Absorber Spring bolt		_
		F/G	Rubber Spring washer		_
		H	Cotter for Shock Absorber Spring bolt		_
	15631		Arrangement and Detail of Coal bunker, trailer		26.4.33
	15632	A/B	Ashpan for Ablett's firegrate		26.4.33
		C	Ashpan Hinge Backing plate		_
		D	Ashpan Hook Backing plate		_
	15633		Feed Pump Body		27.4.33
	15634
	15635	A	Coal Bunker support		27.4.33
		B	Coal Bunker support stay		_
		C/E	Feedheater stay		_
		D	Front Tarpaulin rail support		_
	15636	A	Brake Relieving Spring nut		6.5.33
		B	Pivot Pin nut, NEVER USED		_
			Special Slotted nut		_
	15637		Stop Valve chest		27.4.33
	15638	A	Arrangement of Drawbar Bracket		28.4.33
		B	Drawbar Bracket Top and Bottom plate		_
		C	Drawbar Bracket Back plate		_
		D	Drawbar Bracket angle		_
	15639	A	Drawbar Bracket boss		28.4.33
		B	Drawbar Bracket Distance piece		_
		C	Steam Cocks Control guide		_
		D/E	Ashpan Drain Hose Support clip		_
		F	Ashpan Drain Hose clip		_
		G	Return Cock Operating spindle		_
		H	Return Cock Spindle bracket		_
		J	Boss for Return Cock spindle bracket		_
	15640		Platform, SD4		28.4.33
	15641		15" - 3" x 7" - 0 3/4" platform, SD waggon		2.5.33
	15642		Sentinel Patent Water Tube boiler		1.12.33
	15643		Arrangement of Control Column		29.4.33
	15644	A	Extension Support bracket		9.5.33
		B	Ashpan Drain Hose bracket		_
		C	Speedometer Dial Bracket		_
		D	Special Diff Shaft nut		_
		E	Speedometer Bracket		_
	15645	A	Arrangement of Headboard, SD waggon		2.5.33
		B	Headboard Protection plate		_
		C	Headboard Dowel Pin plate		_
		D	Headboard Dowel Pin		_
		E/F	2" - 8 1/2" Headboard support		_
	15646		Crankcase Oil Sump
	15647	A/B	Platform Rear Corner		3.5.33
		C/D	Platform Front Corner angle		_
		E/F	Headboard Side angle		_
		G	Side Extension Support angle		_
		H	Side extension Support channel		_
		J	Side extension Washer plate		_
		K	Extension support		_
		L	Extension Support socket		_
	15648		Sectional Plan of Gear Box		2.5.33
	15649	A	Gear casing pinion housing		3.5.33
		B	Layshaft Bearing Housing - long		_
		C	Gear Casing layshaft		_
	15650	A	Driving Shaft Bevel		5.5.33
		B	Layshaft Lock nut		_
		C	Driving Shaft Lock nut		_
		D	Layshaft Locking plate		_
		E	Driving Shaft Locking plate		_
	15651	A	Platform Centre Cross bearer		5.5.33
		B	Platform Rear Cross Bearer		_
		C	Platform Front cross bearer		_
		D	Platform Special Cross bearer		_
	15652	A	Coupling Spider		29.11.33
		B	Coupling Spider		_
		C	Coupling Spider		_
		D/E	Coupling Spider		_
		F/G/H	Special Coupling spider		_
	15653	A	Inner Superheated Coil		4.5.33
		B/D	Outer Superheater Coil		_
	15654		Arrangement of Superheater Coil, SD waggon		9.5.33
	15655	A/C	Inner Superheater Coil		6.5.33
		B/D	Outer Superheater Coil		_
	15656		Arrangement of Cross Stays		28.4.33
	15657	A/B	Solebar - rear end		4.5.33
		C/D	Solebar - front end		_
	15658	A	Headstock Gusset - rear end		26.4.33
		B	Buffer Stay - rear		_
		C	Longitudinal Tie bar		_
		D	Diagonal Bracing bar		_
		E	Diagonal Bracing bar		_
		F	Drawbar Guide		_
		G	Buffer Recoil washer		_
	15659	A/B	Cross Stay - end		31.3.33
		C	Cross Stay - inter		_
		D	Top Gusset - cross stay and bracing		_
		E	Cross bar for Vacuum cylinder		_
		F	Gusset to Cross stay and Tie bar		_
		G	Top Gusset - cross stay and bracing		_
		H/J	Cleat to Vac. Cylinder crossbar		_
		K/L	Diagonal bracing bar - end		_
	15660	A	Buffer Stay - front only		30.3.33
		B	Drawgear Stay stiffener		_
		C	Truss Joint plate		_
		D/E	Packing plate (cross bracing)		_
		F	Headstock		_
		G/H	Gusset to Cross stays		_
		J/K	Cross Stay (centre) top and bottom		_
	15661	A	Headstock Gusset plate - front end		27.3.33
		B/C	Solebar and Headstock Cleats - inside		_
		D/E	Solebar and headstock cleats - outside		_
		F	Solebar and Diagonal Gusset plate		_
		G	Headstock and Gusset cleat		_
		H/J	Buffer Base Doubling plate		_
		K	Solebar and Buffer Stay Tie plate		_
	15662	A	Frame joint Plate (outer)		23.3.33
		B	Frame Joint Plate (inner)		_
		C	Buffer Stay - front and rear		_
		D	Gusset Plate - solebar cross stay and buffer stay		_
		E	Drawgear Stay - front and rear		_
		F/G	Cleat for Cross stay front and rear		_
		H	Cross stay - front and rear		_
	15663	A	Gusset to cross stay - centre		2.5.33
		B	Gusset to Cross stay - inter		_
		C	Gusset to cross stay - end		_
		D	Centre pivot liner		_
		E/F	Vacuum Chamber carrier		_
		G	Vacuum Chamber clip		_
		H	Vacuum Chamber packing		_
		J	Pipe clip carrier		_
	15664		Bearing Spring		4.5.33
	15665		Bearing Spring		3.5.33
	15666	A	Feed pump Casing, SD waggon		18.5.33
		B	Feed Pump Crosshead guide		_
		C/F	Feed Pump Crosshead		_
		D	Feed pump Cylinder End plug		_
		E	Feed Pump Gland nut		_
	15667	A	Spare tyre carrying board		5.5.33
		B	Tank Carrying Board Block		_
		C	Steam Brake Piston stop		_
		D	Tailboard Stop bracket		_
	15668	A	Firedoor Trunnion		5.5.33
		B	Firedoor Top Frame angle		_
		C	Firedoor lagging plate		_
	15669		no description or date, text missing
	15670	A	Brake Camshaft Lever stamping		9.3.33
		B	Brake Camshaft Lever stamping		_
		C	Brake Camshaft Lever stamping		_
		D	Brake Camshaft Lever stamping		_
	15671	A/B	Rear Mudguard Bracket(front half)		8.5.33
		C	Extra Drilling frame		_
		D	Extra Drilling in Frame for Tailboard Stop Bracket and Trailer Steam Brake and Cylinder plate		_
	15672	A	Spring Link		5.5.33
		B	Horn Stay Distance Piece bolt		_
		C	Aux. Bearing Spring and bogie Axle side shock absorber		_
		D	Bearing Spring Shoe		_
		E	Axle End Thrust cap		_
		F	Lubricator Driving crank		_
	15673	A/H	Coaling Ladder Carrying bracket		6.5.33
		B	Back Coaling Ladder Carrying bracket		_
		C	? Pricher Carrying hook		_
		D	Slicer Carrying hook		_
		E	Combined Slicer pricher		_
		F	Coaling Ladder hook		_
		G	Steering Gear ball		_
	15674		Arrangement of Speedometer drive		8.5.33
	15675	A/B/C	Gear casing Pinion Hosuing shim		9.5.33
		D/E/F	Layshaft Bearing Housing (long) shim		_
		G/H/J	Driving Shaft Shim		_
		K	Layshaft Bearing collar-large		_
		L	Gear casing Inspection cover		_
	15676		Arrangement of Windscreens		8.5.33
	15677		Control Column		8.5.33
	15678		Arrangement and Detail of Frame for DG4PT Waggon (special)		23.12.31
	15679	A	Arrangement and Deatil of canopy roof		22.5.33
		B	Arrangement and Deatil of canopy roof		_
	15680	A	Bolster Channel		3.5.33
		B	no description or date, for railbus 200HP		_
		C	Bolster Liner		_
	15681	A	RH Water tank		30.12.32
		D	LH Water tank		_
	15682		Arrangement of Gear Box		12.6.33
	15683
	15684		Arrangement of Special Rear Bogie, timber trailer		18.5.33
	15685		Control Box, 200Hp railbus		10.5.33
	15686	A	Filling and Hot Air Connection nipple		10.5.33
		B	Square Connecting Flange		_
		C	Round Connecting flange		_
		D	Connection nipple		_
		E	Lever for Drain lock		_
		F	Pull Rod for Drain Cock		_
		G	Pull Rod Guide		_
		H	Grease Nipple Pipe		_
	15687	A/B	Crankcase Pump End Back cover		10.5.33
		C	Stoker Drive Worm wheel		_
		D	Stoker Drive spindle		_
		E	Stoker Drive spindle head		_
	15688	A	Arrangement of Safety Valve		8.4.33
		B	Arrangement of Blow Off valve		_
	15689	A	Arrangement of Stop Release and Aux valve		5.4.33
		B	Arrangement of Feed Check Valve		_
	15690
	15691		Proposed Arrangement of SD6 fitted with grain carrying body		10.5.33
	15692	A	Oil Pump Body		10.5.33
		B/C	Oil Pump Feed Pipe		_
	15693	A	Boiler and Tank Front Support		11.5.33
		B	Foot release Lever		_
		C	Foot release pedal		_
		D	Foot Release rod		_
	15694	A	Boiler injector Carrying Bracket		11.5.33
		B	Boiler Injector Bracket stay		_
		C	Headboard Protection plateD/E		_
		D/E	4" - 1" Headboard support		_
		F	Rear Drawbar Stop plate		_
		G	Front Drawbar Stop plate		_
	15695	A/B/E/F/G/H	Arrangement and Deatil of cab Door		10.5.33
		C/J/N	Seat Support with Tool drawers		_
		D/K/P	Seat Support and Accum. Box		_
	15696		Special Gear for Transporting bricks		12.5.33
			#NAME?
	15697	A/B/C/D	no description, for SD waggon		12.5.33
		E	Spark Collector Box lid		_
		F	Side lamp Bracket		_
		G	Tail Lamp Bracket		_
	15698		Arrangement of Super sentinel Aux. Engine		16.3.36
	15699		Control Column		1.5.33
	15700	A	Skid chain Nut, CANCELLED		12.5.35
		B	Exhaust Branch joint		_
		C	Lubricator Cylinder Distance piece		_
		E	Tipping Piston Cup washer		_
		D	Crankcase Oil Sump joint		_
		E	Tipping Piston Cup washer		_
		F	Tipping Piston Cup washer		_
		G	Boiler Pressure gauge		_
	15701	A	Oil Pump Ram		13.5.33
		B	Oil Pump Connecting rod		_
		C	Oil Pump Ram plug		_
		D	Inlet Valve		_
		E	Inlet Valve cage		_
		F	Oil Pump Gland		_
		G	Connecting rod bolt		_
	15702	A	Reversing Screw Lever		11.5.33
		B/F	Reversing Lever indicator		_
		C	Vacuum Bell Crank lever		_
		D/E	Control Column Index plate		_
	15703	A	Non-return Valve Body Nipple		13.5.33
		B	Steam Brake Valve union		_
		C	Crankcase Breaher		_
		D	Crankcase Breather cap		_
		E	Special 1/2" - 5/8" BSP nipple		_
		G	Bye-pass Valve nipple		_
		F	Special Adaptor 1 1/2" BSP F-1" BSPM		_
		H	Injector Nipple		_
	15704		Outline Arrangement 15'-3' body		15.3.33
	15705		Bevel Gear Box (throttle)		15.5.33
	15706	A	Bevel Gear Box Cover		15.5.33
		B	Layshaft Housing Front cover		_
		C	Reverse Housing Rear Cover		_
		D	Throttle Layshaft Housing		_
	15707		Outline Arrangement		15.5.33
	15708		Proposed Arrangement of Axle Boxes, Cranks and Rods for 0-4-0 200HP Sentinel condensing type loco
	15709		Special Gear for transporting bricks		16.5.33
	15710		Apron Plate Side Stanchion		15.5.33
	15711	A/B	Side Front End protection plate		17.5.33
		C/D	Tailboard End protection plate		_
		E/F	Side Rear End Protection plate		_
		H	Trailer Brake Rope Guide		_
		G	Front Axle Packing piece		_
		J	Steam Brake Cylinder Support plate		_
	15712	A	Oil Sump Syphon pipe - internal		23.5.33
		B	Oil Sump Syphon pipe - external		_
		C	Syphon Pipe plug		_
		D	Syphon Pipe cap nut		_
		E	Arrangement of Oil Sump Syphon pipe		_
		G	Oil Pressure gauge		_
		F	Gear Case Oil Trough		_
	15713		Outline Arrangement		17.5.33
	15714		Arrangement and Detail of Apron plate		17.5.33
	15715	A	Reverse Layshaft Housing		17.5.33
		B	Reversing Shaft Bearing Housing (front)		_
		C	Reverse Shaft Bearing Housing (rear)		_
		D	Reverse Shaft Bearing Housing (inter)		_
	15716		Arrangement and detail of Cab (hand stoked)		21.4.33
	15717		Venturi Funnel		10.5.33
		B	Funnel Outer Casing		_
	15718		Steamline Funnel back		17.5.33
	15719	A	Top Spark Arrester Vanes		18.5.33
		B	Bottom Spark Arrester Vanes		_
		C/D	Platform Front corner angle		_
		E/F	Headboard Side angle		_
	15720		Arrangement of Fixed Axle box, 600HP loco		21.8.33
	15721		Arrangement of Axle Box (bissel truck)		19.2.34
	15722	A	Control Column Front cover		11.5.33
		B	Reverse Spindle Bearing Cover (front)		_
		C	Reverse Spindle Bearing Cover (rear)		_
		D/J	Reverse Shaft Bearing Housing		_
		E/K	Reverse Shaft End Bearing Housing		_
		F/H	Reversing Screw nut		_
		G	Chain Sprocket Bearing cover		_
	15723		Cab Side		23.5.33
		C/D	Apron Plate Stanchion foot		_
		E	Canopy Roff Stiffening plate		_
		F	Roof Bow stiffening strip		_
		G	Funnel Openning Cope bar		_
		H	Cover Plate Backing strip		_
		J	Canopy Ventilator Cover plate		_
	15724	A	Scraper Ring groove		19.5.33
		B	Piston		_
		C	One Scraper ring		_
		D	Two Scraper rings		_
		E	? No description ?		_
	15725	A	Wrist Pin		20.5.33
		B	Wrist Pin washer		_
		C	Wrist Pin nut		_
		D	Wrist Pin stud		_
		E/H	Wrist Pin bush		_
		F	Crankcase Breather		_
		G	Buffer Plate Distance piece		_
	15726	A	Rear Firegrate Trunnion		20.5.33
		B	Front Firegrate Trunnion		_
	15727	A/B	Hand Brake and Reversing Lever		22.5.33
		C	Gear change Lever		_
	15728	A/J	Reversing Shaft lever		24.5.33
		B	Reversing Spindle Lever (bottom)		_
		C	Control Spindle lever		_
		D	Reversing Spindle Lever (top)		_
		E	Gear Change Operating lever		_
		F	Gear Change Shaft lever		_
		G	Reversing Rod end		_
		H	Reversing Rod end pin		_
	15729	A	Handbrake Quadrant Distance piece		30.5.33
		B	Handbrake Lever trigger		_
		C	Handbrake Lever trigger pin		_
		D/F	Gear Change shaft		_
		E/G	Reversing Shaft		_
	15730		Arrangement of Control Rods		22.5.33
	15731		Proposed Arrangement of SD 6 fitted with Hopper body		29.5.33
	15732		Arrangement and Detail of Frame		20.4.33
	15733		Arrangement and Detail of bunker (hand stoker)		23.5.33
	15734	A/M	Throttle Control lever		23.5.33
		B/K	Lever (throttle)		_
		C/J	Link (reverse)		_
		D	Lever (reverse)		_
			Connecting link (reverse)		_
		G	Chain Adjusting wheel		_
	15735		Arrangement of Underslung Water Tank, geared car		29.5.33
	15736		Arrangement of Control Column		23.5.33
	15737	A/B/C/F/G/H/J	Spark Collecting box		23.5.33
		D	Spark Collecting Box Bottom Lid		_
		E	Blast pipe Flange		_
	15738	A	Reversing Crank		24.5.33
		B	Hand brake Wheel Handle		_
		C	Reversing Spindle		_
		D	Idler Sprocket (reverse gear)		_
		E	Chain Adjusting Cam		_
			Reversing Sprocket		_
	15739		Arrangement and Detail of Frame
	15740		Arrangement of Wheel Axle		25.5.33
	15741		Frame		25.5.33
	15742	A	Crosshead Chamber Oil Reservoir		25.5.33
		B/G	Oil Reservoir End plate		_
		C	Oil Reservoir Flange		_
		D	Oil Reservoir Bracket		_
			Boss		_
		H	Special 3/4" - 5/8" BSP nipple		_
	15743
	15744		Frame for Three way Tipping waggon		1.3.33
	15745	A	Canopy Roof Pressing		7.12.32
		B	Apron Plate pressing		_
	15746	A	Chain Adjusting sprocket		26.5.33
		B	Bearing Locating Washer		_
		C	Chain Adjusting Cam spindle		_
		D	Loose Sprocket Spindle		_
		E	Throttle Control Lever spindle		_
			Bush (throttle)		_
		K	Chain Adjusting Wheel Stop		_
	15747		Boiler Top Cleading Arrangement, SD waggon		25.5.33
	15748	A	Control Box Bottom cover		29.5.33
		B	Gear Box Shim		_
		C	Reversing Shaft end		_
		D	Reversing Shaft End bearing		_
		E	Reversing Shaft Sprocket		_
	15749	A	Apron Plate Front Cope bar		29.5.33
		B/C	Apron Plate Side Cope Bar		_
		D	Apron Plate packing Strip		_
		E	*text missing* Support Clip		_
		F	Grab Handle		_
		G	Grease Gun Clip		_
	15750	A	Swing Link bracket		30.5.33
		B	Bevel Gear Box Cover bush		_
		C	Bevel Gear Spindle		_
		D	Coupling Pin Guide		_
		E	Coupling Pin		_
		F	Coupling Pin Cap		_
		G	Throttle Layshaft		_
	15751		Dashboard, Windscreen Support and Canopy Front Filling		31.5.33
	15752		Footboard, SD waggon		4.7.33
	15753		Proposed Arrangement of SD8 fitted with hopper body		31.5.33
	15754
	15755	A/C	Auxiliary Valve chest		31.5.33
		B	Safety Valve body		_
	15756		Arrangement and Detail of Rear Mudguard (rear half)		31.5.33
			Arrangement and Detail of Rear Mudguard (front half)		_
		J	Rear Mudguard Cross stay		_
		K/L/S/T	Rear Mudguard Rear stay		_
		M/N	Rear Mudguard Top Stay		_
		P/R	Rear Mudguard Front bracket		_
	15757		Arrangement of Rear Mudguards, SD waggon		26.6.33
	15758	A	Footstep for Front Mudguard		6.6.33
		B/M	Front Mudguard Front stay		_
		C/D	Front Mudguard Rear Stay		_
		E/F	Front Mudguard Front stay support		_
		G	Front Mudguard Rear Protection plate		_
		J/L	Front Mudguard Foot pad		_
		H/N	Rear Mudguard Stay		_
		K	Cylinder Lubricator bracket		_
	15759	A	Funnel Top Surround		31.5.33
		B	Spark Collecting Pipe Top flange		_
		C	Coaling ladder carrying hook		_
	15760	A	Steam Brake Shaft Bracket		1.6.33
		B	Steam Brake link		_
		C	Brake Cylinder cover		_
		D	Steam Brake Link guide		_
		E	Drain Valve body		_
	15761	A	Buffer Spring Top Cover plate		15.3.33
		B	Buffer Spring		_
		C	Pipe clip		_
		D	Pipe clip		_
		E	Oil Cup carrier		_
		F	3/8" to 1/2" nipple		_
		G/H	Oil Pipe to Centre pivots		_
	15762	A	Air Compressor Bracket		4.7.33
		B	Mudguard Top Support Bracket		_
		C/D	Guard Rail Bracket (centre)		_
		E/F	Guard Rail Bracket stay (centre)		_
		G/H	Guard Rail Bracket Stay (front)		_
	15763	A	Centre Pivot Casting (upper)		1.3.33
		B	Centre Pivot Casting (lower)		_
	15764	A	Bevel Gear (throttle)		6.6.33
		B	Bevel Pinion(throttle)		_
		C	Suspension Bracket (reverse)		_
		D	Engine Reverse Shaft Sprocket		_
		E	Reversing Layshaft		_
	15765	A	Air Compressor Bracket bolt		6.6.33
		D	Drawbar Buffer bolt		_
			Spring Buckle bolt		_
			Spring Buckle bolt		_
		G	Layshaft Cover (end) set pin		_
		H	Pivot Pin Set pin		_
	15766	A	Brake and Rev. Gear bracket		29.5.33
		B	Reversing Shaft bracket		_
	15767		Bogie Arrangement
	15768
	15769
	15770	A	Arrangement of platform Support stays		6.6.33
		B/C	Platform Support stiffener		_
		D/E	Platform Support stay		_
		F	Brake valve Rear support		_
		G	Brake Valve Front support		_
		H	Special Drilling in RH Footplate bracket		_
	15771		19'0" x 7' 0 3/4" Flat platform		7.6.33
	15772	A/C/D	Combined Blast and Blower Pipe		24.2.47
		B	Spark Arrester vanes		_
	15773	A	Reversing Sprocket Coupling		7.6.33
		B	Layshaft Coupling		_
		C	Control Rod end		_
			Swing Link		_
		E	Throttle Swing link bracket		_
	15774	A/B	Bunker Chute		7.6.33
		C	Bunker Chute Extension Plate		_
		D	Furnace Door Top plate		_
		E/F	Furnace Door Bottom plate		_
		G/H	Ashpan Hinge Pin Locking chain		_
		J	Furnace Door Top plate		_
		K	Furnace Door Bottom plate		_
		L	Arrangement of Furnace door		_
	15775		Wakefields Eureka Type "G" Lubricator, geared car		26.8.33
	15776		Arrangement of Rear Mudguards and Guard Rails with Drilling in Frame		7.6.33
	15777		Proposed Arrangement of Articulated DG8 with grain carrying body		7.6.33
	15778		Proposed Arrangement of Articulated SD 8 with grain carrying body		7.6.33
	15779	A	Reversing Quadrant		7.6.33
		B	Gear Change Quadrant		_
		C	Hand Brake Quadrant		_
		D	Hand brake Pawl		_
		E	Reversing Pawl		_
		F	Gear Chanege Pawl		_
		G	Gear change Index plate		_
		H	Reversing index plate		_
	15780	A	Water lever Gauge Guide		8.6.33
		B	Water level gauge guide		_
		C	Water Level Guide tube		_
		D	Water level Guage float		_
		E	Water Level Gauge guide cap		_
		F	Water level Gauge cap		_
		G	Tank Filling tube		_
		H	Tank connecting pipe		_
	15781	A	Pawl Rod End		8.6.33
		B	Pawl Rod		_
		C	Pawl Rod guide		_
		D/G	Pawl Pin		_
		E/H	Hand Brake Shaft		_
		F	Reversing Spindle		_
	15782		Tipping platform for Dg6T on Pneumatics		8.6.33
	15783	A/B	Guard Rail Bracket stay (rear)		8.6.33
		C/D	Guard rail Bracket (rear)		_
			Rear Mudguard		_
		G/H	Headboard Side angle		_
		J/K	Platform Front corner angle		_
			Tipping Side *text missing*		_
	15784	A	Brake Beam Pull Strap end		8.6.33
		B	Brake Beam Pull Strap end		_
		C	Brake Beam Pull Strap end		_
		D	Strap End plates		_
	15785	A/B	Steam Brake Cylinder		9.6.33
		C/D	Steam Brake Cylinder		_
	15786	A	Throttle Lever bracket		9.6.33
		B	Throtlle Direction Change lever		_
		C	Throttle Cross Rod lever		_
		D	Throttle Cross Rod Bracket		_
		E	Cross Rod end		_
		F	Reversing Indicator		_
	15787	A	Brake Rod Hanger (driving end)		10.6.33
		B	Vac. And hand Brake Rod hanger		_
		C	Hand Brake Yoke Support link		_
		D	Hand brake Yoke		_
	15788		Bissel Truck arrangement		14.5.33
	15789	A	Throttle Lever spindle (engine end)		12.6.33
		B	Throttle Lever spindle (rear end)		_
		C	Throttle lever(control box)		_
		D	Bracket boss		_
		E	Sight Hole Plug		_
		F	Reverse Shaft End bearing Spindle		_
	15790	A/B	Vac. Brake Cylinder Support bracket		12.6.33
		C	Yoke Tie Rod Stop bracket		_
		D	Hand Brake Shaft thrust bracket		_
		E	Brake Hanger bracket		_
		F	Yoke Tie rod		_
	15791	A	Camshaft Spur pinion		15.6.33
		B	Camshaft Bush Pump end		_
		C	Engin Flywheel		_
		D	Camshaft Key		_
		E	Water Gauge Rod guide		_
	15792		Arrangement of Control Rods in Underframe		22.6.33
	15793		Torque Stay (trailing end)		13.6.33
			Torque Stay (leadling end)		_
	15794		Bunker Base		24.5.33
	15795	A	Ratchet Casing		25.5.33
		B	Ratchet Casing End Cover		_
		C	End Cover Gland		_
		D	Ratchet Adjusting plate		_
		E	Ratchet Pawl body		_
		F	Stoker Conveyor		_
	15796	A	Stoker Conveyor spindle		29.5.33
		B	Stoker Ratchet wheel		_
		C	Ratchet Operating Lever (rear)		_
		D	Ratchet Operating Lever (front)		_
		E	Pawl Cut off Operating Lever		_
		F	Ratchet Pawl tip		_
	15797	A/B	Stoker Driving rod end		31.3.33
		C	Driving Rod end bush		_
		D	Driving Rod end cover		_
		E	Driving Rod End pin		_
		F	Driving Rod end distance piece		_
		G	Ratchet Lever Distance piece		_
		H	Ratchet Lever bolt		_
	15798	A	Thermofeed Control Valve Yoke		8.6.33
		B	Thermofeed Control valve elbow		_
		C	Control Valve Clutch Fork		_
		D	Control Valve Elbow Stifferening plate		_
		E	Pawl Tip locking plate		_
	15799	A	Ratchet Control Operating lever		13.6.33
		B	Thermofeed Control Operating Lever		_
		C	Ratchet Control Operating shaft		_
		D	Thermofeed Control Operating shaft		_
		E	Ratchet Control Quadrant plate		_
		F/G	Control Rod		_
		H/J	Control Rod end		_
		K	Pawl Return Spring bolt		_
	15800	A	Ratchet Control Quadrant		22.6.33
		B	Ratchet Control Shaft bracket		_
		C	Ratchet Control Quadrant lever		_
		D	Stoker bell Crank lever		_
		E	Stoker Bell Crank bracket		_
	15801		Reversing Rod		13.6.33
		W	Brake and Rev. Gear Bracket back plate		_
		X	Rev. Gear change Rod Guide Bracket		_
			Gear Change rod		_
			Steam Brake rod - rear		_
	15802	A	Bell Crank Bracket stay (inner)		27.6.33
		B	Bell Crank Bracket stay (outer)		_
		C	Bell Crank Lever pin		_
		D	Conveyor Spindle Distance piece		_
		E	RH Water Tank Top Pressing		_
		F/G	Boiler Foot (side)		_
		H	Boiler Foot (rear)		_
	15803	A/B	Brake Pull Rod (hand)		13.6.33
		C/D	Brake Pull Rod (vacuum)		_
		E	Brake Pull Rod (driving Bogie End)		_
		F/G	Brake Pull Rod(bogie)		_
	15804		Sanding Arrangement		13.6.33
	15805	A	Outer Sandbox		31.5.33
		B	Inner Sandbox		_
		C	Sanding Valve Seat		_
		D	Sanding Diaphragm carrier		_
		E	Sanding Valve		_
	15806
	15807		Arrangement and *text missing*		13.6.33
	15808		Steam Brake Cylinder		9.6.33
	15809		Special Pins		14.6.33
			Special Bosses		_
			Special Ferrule		_
			Bevel Locking washer		_
		G	Hand Brake Screw Shaft		_
		H/L	Gear Box Bevel Shaft		_
	15810	A	Arrangement of Trailer Steam Brake Gear		14.6.33
		B	Steam Brake Gear Cross support		_
		C/D	Steam Brake Cylinder Support angle		_
		E	Rear Cross Link Guide		_
	15811	A	Rear Bottom cross Link		14.6.33
		B	Rear Top Cross link		_
		C	Front Link		_
	15812	A	no description, for rail bus 200HP		14.6.33
		B	Engine Suspension Spring plate		_
		C	Engine Suspension Spring cap (top)		_
		D	Engine Suspension Spring cap (bottom)		_
			no details given		_
			no details given		_
			no details given		_
	15813	A	Hand Brake Shaft Bracket		14.6.33
		B	Gear Box Cover		_
		C	Hand Brake Column Gear box		_
	15814		Tipping Platform		15.6.33
	15815
	15816	A/B	Hand Brake Column base		15.6.33
		C	Column Base Bush (short)		_
		D	Column Base Cover bush		_
	15817	A	Hand Brake Cross shaft gear box		16.6.33
		B/C	Brake Yoke Swivel nut		_
		D/E	Handbrake Screw		_
	15818		Arrangement of Windscreen with both Windows split and hinged		16.6.33
	15819	A/B	Turntable Ring - top and bottom		17.6.33
		C	Pivot Channel Centre Gusset (turntable)		_
		D/E/J/K	Front Cross Channel Gusset		_
		F	Steam Brake Cylinder Bracket, CANCELLED		_
		G	Steam Brake Cylinder bracket		_
		H	Pivot Channel Centre Gusset (main frame)		_
	15820	A	Spring Buckle Bolt nut		19.8.33
		B	Hinge Bar nut		_
		C	Copper Washer for Stop Valve header		_
		D	Serrated Washer for Stop Valve header		_
		E	Jam Nut for Apron panel		_
	15821		Engine Cover doors		19.6.33
	15822		Tipping Cylinder, DG6T		19.6.33
	15823		Bumper bracket		19.6.33
		B	Bumper bracket cap		_
		D/E	Blast nozzle		_
		G	Bumper bracket		_
	15824	A/B/S/T	Platform Rear Corner angle		19.6.33
		C/D/E/F	Side End Protection plate		_
		J	Tailboard Catch Bracket		_
		K/L	Tailboard Protection plate		_
		G/H	Tailboard Hinge		_
		M/N	Side End protection plate		_
		P/U/R/V	Tailboard Catch bracket		_
	15825		Bearing Spring		20.6.33
	15826	A	Arrangement of Headboard 1" -8"		23.6.33
		B	End Cross Bearer gusset		_
		C/D	Headboard Support		_
		E	Headboard Outside Cope bar		_
		F	Headboard Inside Centre cope bar		_
		G	Headboard Outside Centre Cope bar		_
		H	Brake Rope guide block		_
	15827	A	Volute Spring		20.6.33
		B	Joint for Exhaust Branch to cylinders		_
		C	Joint for Water Levelling pipe		_
		D	Tank Sieve (complete)		_
		E	Water Inlet Pipe joint		_
		F	Tank Strap (240 gall tank)		_
	15828	A	Gear Box Bevel Shaft (crossover)		20.6.33
		B	Hand Brake Spindle		_
		C	hand Brake Column		_
		D	Hand brake Hand Crank		_
	15829		Arrangement of engine		12.9.33
	15830	A	Spark Collecting Box		21.6.33
		B	Funnel damper		_
	15831		Arrangement of Timber Trailer		21.6.33
	15832	A	Bearing Housing Suspension plate		22.6.33
		B	Gear box Suspension plate		_
	15833	A	Brake beam Pull Strap End		22.6.33
			Brake Pull Strap		_
	15834		Body frame Arrangement (front end)		23.6.33
	15835		Arrangement of Body Frame (rear end)		23.6.33
	15836		Special leading axle		24.8.33
	15837		Arrangement of 4"-1" headboard		23.6.33
	15838		Drilling in Cross Members for Control Rods		23.6.33
	15839		Drilling in Cross Members for Control Rods		24.6.33
	15840	A/G	Steam Brake Lever - inner		23.6.33
		B	Oil Trough Distance piece		_
		C	Gear Case Oil Trough		_
		D	Lubricator Test Valve Body		_
		E/J	Test Valve Oil pipe		_
		F	Test Valve Adaptor		_
		H	Camshaft Oil Trough		_
	15841		Arrangement of Rear bogie Axle		23.6.33
	15842		Control Shaft		20.6.33
		F	Chain case LH		_
		E	Chain case Cover		_
		G	Chain case RH		_
	15843		30" dia Tyre and Wheel Centre		23.6.33
	15844		Control Shaft		19.6.33
			Control Shaft		_
			Control Shaft		_
			Control Shaft		_
	15845	A	Arrangement of Frame		27.6.33
		B	Arrangement of Frame		_
	15846
	15847		Arrangement and Detail of Saloon type canopy		13.3.33
	15848		Detail of Apron Plate for DG waggons		15.2.30
	15849		Footplate		7.3.32
	15850		Bogie Centre Casting		29.7.33
	15851		Rear Wheel (rigid six wheeler)		25.8.27
	15852	A	Dipper Rod Pipe		27.6.33
		B	Dipper Rod		_
		C	Dipper Rod Pipe Tee piece		_
		D	Tee Piece Locking plate		_
		E	Check Valve Body		_
			Pins		_
			Gib Key		_
	15853	A	Arrangement of Rear Mudguard and tyre carrier		28.6.33
		B	Tyre Carrier frame		_
		C	Rear Mudguard Front Stay Support bracket		_
		D/E	Body side Support angle		_
		G/F	Rear Mudguard Bottom stay (front half)		_
	15854		Tank Complete		29.6.33
	15855	A	Engine Suspension Link Bracket		29.6.33
		B	Engine Suspension Link		_
		C	Suspension Link Cap		_
		D	Suspension Link Buffer		_
	15856		Arrangement and Detail of Rnd Tipping platform		29.6.33
	15857		Conical Grate (3/4" spaced)		30.6.33
	15858	A/B	Platform Rear Corner angle		30.6.33
		C/D	Platform Front Corner angle		_
		E/F	Headboard Side angle		_
		M	Side End Protection plate		_
		G/H	Platform Rear Corner angle		_
		J/K	Platform Front Corner angle		_
		L	Body Side Angle		_
		N	Body Side Hinge boss		_
	15859		Axlebox		30.6.33
	15860		Arrangement and Detail of frame		1.7.33
	15861	A	Rear Cross Channel		3.7.33
		B	Rear Drawbar Bracket channel		_
		C/D	Rear Drawbar Horn plate		_
		E	Cross and Drawbar Channel cleat		_
		F/G	Rear Support Channel Cleat stay		_
		H	Arrangement of Rear Drawbar bracket		_
		J	Platform Support Channel cleat		_
	15862	A	Tank Filler, 200HP geared car		1.7.33
		B	Tank Internal Suction pipe		_
		C	Tank Internal Suction pipe		_
		D/E/F/G/H/J/K	Tank Sump Strainer		_
	15863	A	Body Side Bottom angle		3.7.33
		B	Body Side Support channel		_
		C	Side Stiffener Cope bar		_
		D	Rear Axle Packing piece		_
		E	Front Axle Packing piece		_
	15864		Arrangement of Controls Driving End		3.7.33
	15865		Arrangement of brake Shoes		3.7.33
	15866	A	Arrangement of Turntable		1.7.33
		B/C	Turntable Side Channel		_
		D/E	Turntable Cross channel		_
		F/G	Rear Spring Channel		_
		H	Rear Cross Channel cleat		_
	15867
	15868	A/B	Side front End protection Plate		4.7.33
		C	Tailboard End protection plate		_
		D	Side rear End protection plate		_
		E	Centre Post Stanchion		_
		F/G	Centre Post Gusset plate		_
		H	Centre Post Stanchion Backing Plate		_
		J	Centre Post stanchion		_
	15869	A	Axlebox Cover (outside)		3.7.33
		B	Axlebox Cover (inside)		_
		C	Thrower Ring		_
		D	Distance ring		_
		E	Axle End Thrust Cap		_
		F	Spring T Link		_
	15870	A/B	Engine Side Suspension bracket		4.7.33
		C	Drilling for Boiler feet		_
		D	Front Wheel cap		_
	15871		Klingers patent AB 18 KU Type Guage Cocks with K.III gauge body		14.6.33
	15872		Arrangement of Sanding Gear		5.7.33
	15873		Spring Pad		5.7.33
	15874		Arrangement of Drilling in Footplate		6.7.33
	15875	A	Sanding Valve Rod		5.7.33
		B	Sanding Gear rod		_
		C	Cross Channel		_
		E/F	Spring Bracket Distance piece		_
		D	Tyre carrier		_
	15876		Rear Wheel Hub		6.7.33
	15877		Arrangement of Forecarriage		6.7.33
	15878		Arrangement of 3 Way Tipping platform		27.7.33
	15879		Rear Axle		7.7.33
	15880	A/B	Rear Axle Shaft		10.7.33
		C/D	Rear Axle Shaft		_
	15881	A	Rear Axle Shaft cover		11.7.33
		B	Rear Wheel Hub Bolt		_
		C	Oil Thrower Fixing screw		_
		D	Front Wheel Stop Pin		_
		E	Spring Pad Cover Set pin		_
		F	Bogie Pivot Pin bush Set pin		_
	15882	A	Arrangement of Front mudguard		7.7.33
		B	Front Mudguard Rear support		_
		C/D	Front Mudguard Support bracket		_
		E/J	Tank internal pipe		_
		F	Steady plate		_
		G	Body Extension Support		_
		H	Washer plate		_
	15883	A	Weir Pump Support bracket		8.7.33
		B	Weir Pump Support bracket		_
	15884	A/B	Rear Mudguard (rear end) standard rigid six wheeler		10.7.33
		C/D	Rear Mudguard (front end) standard rigid six wheeler		_
	15885	A	Rear Drawbar Bracket		10.7.33
		B	Drawbar Buffer Housing		_
		C	Drawbar Bracket Boss		_
		D	Drawbar Buffer		_
		E	Drawbar Stop Plate		_
		F	Front Drawbar Pin boss		_
	15886		Sentinel Patent Water Tube Boiler		8.5.33
	15887
	15888
	15889
	15890
	15891
	15892
	15893
	15894
	15895
	15896
	15897
	15898
	15899		Arrangement of Drawbar Buffer		10.7.33
	15900		Proposed Arrangement of Tractor with DG engine		10.7.33
	15901		Proposed Arrangement of Tractor with 'Sentinel' Engine		10.7.33
	15902	A	Pivot Top Casting		13.7.33
		B	Pivot Bottom Casting		_
	15903	A	Arrangement of Turntable Pivot		18.7.33
		B	Pivot Pin		_
		C	Pivot Pin Bush		_
		D	Thrust Lining		_
		E	Pivot Pin Collar		_
	15904		Upper Structure arrangment
	15905		Arrangement of Bogie		26.8.33
	15906		Brake Arrangement Air and Hand		14.3.33
	15907
	15908	A	Arrangement of Tyre Carrier		11.7.33
		B	Tyre carrier Stay		_
		C	Headboard Catch Bracket		_
		D	Headboard Binding plate		_
		E/F	Apron Plate Stay		_
	15909	A	Arrangement of Hinged Headboard		11.7.33
		B	Cab Door Winding Window Glass		_
		C	Cab Side Window glass		_
		D/E	Wheel Arch		_
		F/G	Wheel Arch		_
	15910		Proposed Arrangement Six Wheeled trailer		12.7.33
	15911	A	Tipping Cylinder		12.7.33
		B/C	Tipping Cylinder bracket		_
	15912	A	Arrangement of Turntable pivot		12.7.33
		B	Pivot Pin		_
		C/D	Spring Front Bracket Packing piece		_
		E/F	Spring Rear Bracket Packing piece		_
		G/H	Pivot Channel Centre Gusset (bottom)		_
	15913	A	Pivot Top Casting		11.7.33
		B	Pivot Bottom casting		_
	15914	A	Steam Brake Pedal lever		25.7.33
		B	Steam Brake Shaft Lever (outer)		_
		C	Pedal		_
		D	Accelerator Pedal Lever		_
		E	Front Spring Slipper plate		_
		F/G	Inside and Outside Washers (silent bloc)		_
	15915	A	Side Centre Stanchion		15.7.33
		B	Centre Stanchion gusset		_
		C	Skid Bar Eye bolt		_
		D/M	Front Corner plate (top)		_
			Stanchion Corner stay		_
		F/G	Front stanchion		_
	15916		Arrangement of Buffers and Drawgear		14.7.33
	15917		Arrangement of Piping - Boiler end		29.8.33
	15918		35" Dia Wheel *text missing*		14.7.33
	15919	A	Arrangement of Canopy Roof sliding door		15.7.33
		B/H	Canopy Roof Sliding door		_
		C/D/E/F/J/K/L/M	Rail for Canopy Roof Sliding Door		_
		G	Guide Rail for canopy Roof Door		_
	15920		Auxiliary Drive casing		17.5.33
	15921		Lubricator Body, SD
	15922	A	Lubricator Body Cover		30.7.33
		B	Lubricator Cover lid		_
		C	Air Pump Pinion		_
		D	Dynamo Drive Spur wheel		_
		E	Dynamo Pinion		_
		F	Lubricator Oil Filter		_
	15923		Arrangement and Deatil of Frame		17.7.33
	15924		Arrangement of Wheel and Axles		19.7.33
	15925	A/B	Platform Rear Corner angle		17.7.33
		C/D	Platform Front Corner angle		_
		E	Tailboard catch bracket		_
		F	Tailboard catch bar		_
		G/H	Headboard Side angle		_
		J/K	Headboard Side angle		_
	15926	A/B/C/J/K	Bogie Suspension Links and brackets		6.4.36
		D	Top Pivot cover		_
		E	Spring Hanger washer		_
		F/G	Hornblock Liner		_
		H	Oil Nipple (special)		_
	15927		Arrangement of Trailer frame		18.7.33
	15928		Arrangement of Frame		15.7.33
	15929	A/B	Turnatble Side channel		6.7.33
		C	Turntable Rear Cross channel		_
		D/E	Turntable Pivot channel		_
		F	Turntable Front cross channel		_
	15930	A/B	Side Channel, trailer		18.7.33
		C/D	Rear Spring Channel		_
		E/K	Frame Centre and Front Cross channel		_
		F/G	Frame Pivot frame		_
		L	Frame Pivot Channel centre gusset		_
	15931		30" Tyre and Wheel centre
	15932	A/K	Rear Cross channel		10.7.33
		B/C	Rear Cross channel cleats		_
		D/E	Front and rear Cleat		_
		F/G	Turntable Front stay		_
		H/M	Top Turntable ring		_
		J/L/N	Bottom Turntable ring		_
	15933		Bissel Truck Casting		19.7.33
	15934	A/J	Tyre carrier Front half		7.7.33
		B/K	Tyre carrier Rear half		_
		C/D	Rear Mudguard Rear half		_
		G/H	Rear Mudguard , Bottom Bracket		_
	15935	A/B	Frame Truss arrangment		19.7.33
		C/D	Side Channel truss		_
		L/M/F/P/R	Frame Truss strut		_
		H	Turntable distance piece		_
		G	Trailer Hand Brake Bracket		_
		J/K/N	Turntable Ring packing piece		_
	15936	A	Tyre carrier stay
		B	Arrangement of tyre carrier		_
		F	Brake Pulley Distance piece		_
	15937		Hub, timber trailer		20.7.33
	15938	A	Bogie Frame inner		20.7.33
		B	Bogie Frame outer		_
	15939		Alteration to Brake Shoes		20.7.33
	15940	A	Pivot Pin Bracket (bottom)		20.7.33
		B	Pivot Pin Bracket (top)		_
		C	Pivot Pin		_
			Drawbar pin		_
		E	Turntable Ring (bottom)		_
		F	Turntable Ring (top)		_
	15941		Hornblock
	15942	A	Superheater Coil - outer		3.8.33
		B	Superheater Coil - inner		_
	15943		Bogie Axles		14.9.33
	15944		Arrangement and Detail of Frame		21.7.33
	15945		Arrangement of Turntable, trailer		6.7.33
	15946	A/B	Rear Spring Rear Bracket		14.7.33
		C	Spring Plate support		_
		D/M	Rear Spring Rear Bracket support		_
		E/N/F/P	Front Pivot Cross channel cleat		_
		G/H	Front Pivot Cross channel cleat		_
			Tipping Cylinder Cross channel packling		_
		K/L	Front Cross Channel cleat		_
	15947	A	Dynamo Coupling cover		21.7.33
		B	Lubricator Worm Wheel		_
		C	Aux. Drive casing cover		_
		D	Tyre Pump Sriker guide		_
		E	Lubricator Heating Pipe		_
		F	Tyre pump Striker		_
		G	Brake Rod Lock nut		_
	15948	A	Arrangement of tailboard		21.7.33
		B	Centre Catch Stirrup		_
		C	Centre Catch strap		_
		D	Centre Catch Stirrup bolt		_
		E	Platform Rear channel bracket		_
	15949	A/C	Superheater Coil - inner		21.7.33
		B/D	Superheater Coil - outer		_
	15950	A	Delivery Bend		8.8.33
		B/E	Delivery Air vessel Bend		_
		C	Suction bend		_
		D	Suction Plug cock		_
	15951		Arrangement of Wheels and Axles		21.7.33
	15952		SD Tank waggon
	15953		Spring Bracket		24.7.33
	15954	A	Swing Link bracket		28.3.33
		B	Swing Link bracket cover		_
	15955	A	Brake Hanger bracket		24.7.33
		C	Sandbox		_
		D	Whistle base		_
		E/H	Sandbox		_
	15956		Throttle and Reversing gear arrangement		16.11.33
	15957		Rear Wheel Hub		21.8.33
	15958	A	Front axle		24.7.33
		B	Turntable Ring		_
		C	Front Hub Cap		_
		D	Tyre Carrier plate		_
	15959	A	Dynamo Support bracket		26.7.33
		C	Reversing Quadrant		_
		B	Dynamo Driven Sprocket		_
		D	Reversing Lever index plate		_
	15960	A	Spring Pad		25.7.33
		B	Spring Pad Bottom plate		_
		C	Spring Top plate		_
		D	Brake Drum		_
		E	Rear Bogie Axle Protection tube		_
	15961		Top Pivot Casting		25.7.33
	15962
	15963	A	Axle Box		31.7.33
		B	Axle Box End Cap		_
		C	Bearing Distance piece		_
		D	Axle Box cover		_
	15964		Arrangement of Sandboxes, 600HP Loco		28.9.33
	15965	A	Axle Oil Thrower ring		22.11.33
		B	Axle End Thrust cap		_
		C/G	Thrust Cap Locking plate		_
		D	Axle Box Guide liner		_
		E/F	Axle Box guide		_
	15966
	15967	A/B	Bulb Angle Support stay		27.7.33
		C	Centre Channel and Rear Cross channel cleat		_
		D	Bulb Angle and Front Cross Channel cleat		_
		E	Rear Cross Channel cleat		_
		F/G	Rear Tipping Cylinder Cross Channel support		_
		H/J	Front Tipping Cylinder Cross Channel support		_
		K	Rear Tipping Cylinder Cross Channel Plate		_
		L	Front Tipping Cylinder Cross Channel plate		_
	15968	A	Brake Coupling Rod		27.7.33
		B/C	Side Channel (outside)		_
		D/E	Side Channel (inside)		_
		F	Front Cross channel		_
	15969	A	Hornblock Keep		27.7.33
		B	Bogie Safety Bracket		_
		C	Bissel Truck Check spring		_
			Special Washer		_
			Taper Washer		_
		G	Sandbox Support bracket		_
	15970	A	Air Compressor Stay plate		28.7.33
		B	Air Compressor Stay bracket		_
		C	Air Compressor Stay bolt		_
		D	Arrangement of Air Compressor stay		_
	15971	A	Rear Cross channel		31.7.33
		B/D	Tipping Cylinder Channel (rear)		_
		C/E	Tipping Cylinder Cross Channel (front)		_
	15972		Bogie Frame stay		29.7.33
	15973		Arrangement of Dynamo Drive		29.7.33
	15974		Conversion to Roller ?BoS? For Rear Axle for 4 ton trailer		29.7.33
	15975	A/B	Rear Mudguard Front half		31.7.33
		C/D	Rear Mudguard Front half top stay		_
		G/H	Rear Mudguard Rear half top stay		_
		E/F	Rear Mudguard, Front Half Bottom stay, CANCELLED by 15975 K&L		_
		J	Protection plate		_
		K/L	Rear Mudguard Bottom Stay (front half)		_
	15976
	15977		Arrangement of Tipping Platform		31.7.33
	15978		Arrangement of Under Slung Water tank		31.7.33
	15979		Delivery Bend flange		9.8.33
		B	Suction Plug Cock flange		_
		C	Suction Pipe Flange		_
		D	Plug Cock Stiffening ring		_
		E	Suction Plug Cock joint		_
		F	Injector Support bracket		_
		G/H	Overflow Pipe Bracket and Clip		_
		J/K	Injector Handle Guide bracket		_
	15980	A	Turntable Frame		1.8.33
		B	Turntable Ring support channel		_
		C	Pivot Support channel		_
	15981	A	Pivot Support channel		1.8.33
		B	Turntable Frame Gusset		_
		C	Pivot Pin Top Plate		_
		D/M	Pivot Pin Cotter plate		_
		E	Drawbar Eye Bolt Washer plate		_
		F	Steering Lock Stop plate		_
		G/J	Steering Lock stop		_
	15982	A	Tipping Platform Stop Bracket		1.8.33
		B	Steam Brake gear Cross Support		_
		C/D	Steam Brake Cylinder Support angle		_
		E	Brake Compensating Link		_
		F	Headboard Stanchion		_
		G/H	Headboard Side angle		_
	15983		Arrangement of Buffing and Drawgear		20.11.33
	15984	A	Rear Cross Channel		2.8.33
		B	Rear Frame Gusset		_
		C	Rear Frame Gusset		_
		D	Support plate(centre)		_
		E/F	Support Plate (outside)		_
		G	Pulley Bracket Support angle		_
		H	Brake Rope Guard (LH side)		_
	15985	A	Pole Stirrup (front)		2.8.33
		B	Pole Stirrup (rear)		_
		C	Front Bolster Support		_
		D	Drawbar Eyebolt		_
		E	Tyre carrier Angle (rear)		_
		F	Tyre carrier Angle (front)		_
	15986		Rear Hub for Roller Bearings for 3 - 4 ton trailer		2.8.33
	15987		Trailer Rear Spring pad		1.5.33
	15988		Front and Rear Axle		3.7.33
		B	Oil Retaining ring		_
		C	Felt Washer for oil retaining ring		_
		D	Roller bearing Adjusting nut		_
		E	Roller bearing Adjusting washer		_
	15989	A	Brake Shaft bracket		3.8.33
		B	Bissel Truck Arm bracket		_
		C	Axlebox Dust cover		_
		E	Plug for Axlebox		_
		D	Bissel Truck Arm bush		_
	15990	A	Boiler Top Cleading		3.8.33
		B	Coaling Ladder Carrying bucket		_
		C/E	boiler Top Dog Cap nut		_
		D	Boiler Cleading stud		_
	15991		Bolster End Casting		17.10.33
	15992	A/F/G	Damper Handle		4.8.33
		B	Damper Stop Plate		_
		C	Ashapn Hinge pin		_
		D	Hinge Pin Ring		_
		E	Ashpan		_
	15993	A/B	Ashpan Hinge - rear		2.8.33
		C	Ashpan Hingebracket		_
		D/E	Damper Guide		_
		F/G	Damper handle clip		_
	15994		Arrangement of Trailer Steam Brake Gear		4.8.33
	15995		Brake Rope Guide block		9.3.33
		B	Brake Rope Guide tube		_
		C	Arrangement of Front Mudguard		_
		D	Front Mudguard Support bracket		_
		E/F/S	Front Mudguard Rear Support		_
			Mudguard Stiffening strip		_
		P/Q	Rear Mudguard Front stay		_
	15996	A	Brake Rope Guard (RH side)		4.8.33
		B/C	Bolster Bracket		_
		D	Pole Roller bracket		_
		E	Brake Rope pulley		_
		F	Distance piece		_
		G	Trailer Brake Stirrup Guide packing		_
		H	Alterations to Rear Cover		_
		J/K	Tank Manhole and Cover and Ring (on rear cover)		_
	15997	A	Relief valve adpater		4.8.33
		B	Plug for Relief Valve adaptor		_
		C	Pressure Gauge nipple		_
		D	Modifications to Feedheater body 8246A		_
		E	Arrangement of Feedheater Top as modified		_
	15998		Heavy Bogie Springs		3.8.33
	15999		Light Bogie Spring		4.8.33