15250	A/B	Fitted Bolt	19.1.33
	C/D/G/F	Fitted Bolts	_
	E	Steering Drop Lever	_
15251
15252	A	Throttle Control Shaft	19.1.33
	B/C	Cross Shaft Bracket	_
	D/E	Throttle Control Shaft Lever	_
		Cross Shaft Lever	_
	G/H	Hand Lever Fulcrum Bracket (throttle)	_
	J	Throttle Cross Shaft	_
15253	A	Throttle Restricting bracket	20.1.33
	B	Reversing Indicator bracket	_
	C	Reversing Screw	_
	D	Reducing Valve block	_
	E	Reversing Screw nut	_
	F	Reversing Indicator	_
15254
15255		Frame for DG Tractor	20.1.33
15256		1000 Gallon Tank	19.1.33
15257	A/H	Front Suspension Gusset	21.1.33
	B/J	Front Suspension Gusset packing	_
	C/D	Front Horn Plate Stay	_
	E	Engine Suspension Rear cahnnel	_
	F	Engine Suspension Front channel	_
	G	Brake Drum Centre Key	_
15258	A	Reversing Quadrant, SD waggon	20.1.33
	B	Gear Change Quadrant	_
	C	Reversing Index plate	_
	D	Index Plate Support (gears)	_
	E	Gear Change Index plate	_
	F/G	Quadrant Distance piece	_
	H	Gear Change shaft	_
15259	A	Hoisting Engine Suspension Channel	20.1.33
	B	Crane Post Support bracket	_
	C	Floor Support angle	_
	D	Crane Support packing plate	_
	E	Arrangement of Headboard	_
15260	A	Hand Brake Shaft	20.1.33
	B	Reversing Shaft	_
		Hand Brake Forward Rod	_
	D/E	Reversing and Gear Change Rod	_
15261	A	Feed Check Valve chest	24.1.33
	B	Check valve	_
	C	Check Valve Stopper	_
	D	Check Valve seat	_
	E	Shut Off Valve cap	_
15262	A	Bearing Shaft, railbus
	B	Bearing Sleeve	_
	C	Bearing bush	_
15263	A	Throttle Hand lever (tank end)	23.1.33
	B	Throttle Cross Shaft Bracket (tank end)	_
	C	Throttle Cross Shaft Bracket (tank end)	_
	D	Throttle Cross Shaft (tank end)	_
15264	A	Arrangement of Reversing Screw	23.1.33
	B	Reversing Indicator Nameplate	_
	C	Reversing Screw Tube - top	_
	D	Reversing Screw	_
	L	Reducing valve bracket	_
15265		Arrangement of Davit Socket and Hoisting Engine with Extra Drilling in frame	23.1.33
15266		1 1/2" Steam Jacketted Relief Valve body	23.1.33
15267	A	Distributor branch	23.1.33
	B	Distributor Elbow	_
	C	Pump Suction bend, CANCELLED - never used	_
	C	Pump Suction bend	_
15268	A	3" Tar Sluice Valve Seating, tar spraying waggon	28.1.33
	B	3" Tar Sluice Valve bridge	_
15269	A/F	Tipping Piston	24.1.33
	B/E/H	Tipping Piston Rod	_
	C	Tipping Piston Cup Washer	_
	D/G	Tipping Piston Bottom Washer	_
15270	A	Steam Brake Hand lever	23.1.33
		Lever	_
		Rod Jaw	_
	G	Cross Shaft Bracket (tank end)	_
		Rod End	_
		Rod Coupling	_
	L	Steam Brake Cross Shaft (tank end)	_
	M	Bracket (steam brake)	_
15271	A	Tank Front Carrying board	24.1.33
	B	Tank Rear Carrying Board	_
	C	Spring Slipper Packing plates	_
		Headboard Knee Cop bar	_
		Headboard Knee	_
15272	A	Handle Bar for Hand Brake
	B	Handle for Hand Brake	_
	C	Spindle for hand Brake	_
	D	Flange for Hand Brake tube	_
	E	Swivel Nut for Hand Brake Spindle	_
	F	Weigh Shaft Lever for Hand Brake	_
15273	A	R.Axle Layshaft Bevel, SD	24.1.33
	B	RA Driving Shaft Bevel	_
	C	Tip Two Way Valve	_
	E	Layshaft Thrust Washer	_
	D	Blast Bend Protection plate	_
15274		Throttle Control Rod	24.1.33
		Control Rod Swing link	_
		Control Rod Swing link	_
	G	Control Rod Swing Link Bracket	_
		Control Rod End	_
	M	Mechanical Stoker Control Rod (vertical)	_
	R	Thumbscrew for Clamp	_
15275	A	Centre Roller Bracket Channel	25.1.33
	B	Arrangement of Centre Rope Guide rollers	_
	C/D	Rear Mudguard Front Stay	_
	E	Sprag Channel End pin	_
	F	Crankcase Suspension Bracket stay	_
15276	A	Tipping Piston spring	25.1.33
	B	Piston Spring plate	_
	C/K	Piston Rod Bearing retaining ring	_
	F/J	Tipping Cylinder Bottom Cover joint	_
	D/E	Rear Tipping Pivot pin	_
	G	Centre Catch Bolt	_
	H	Centre Catch Bolt ferrule	_
15277	A	Bearing Housing Engine Reversing shaft	25.1.33
	B	End Cover	_
	C	End cover	_
15278	A	Bearing Bracket, rail bus	26.1.33
	B	Bearing Bracket	_
	C	Bearing Shaft (engine reversing control)	_
15279	A	End Cover	27.7.32
	B	Bearing bush	_
	C	Bearing Bracket	_
	D	Thrust Collar	_
	E	Bearing Shaft	_
	F	Coupling Spider	_
	G	Coupling flange	_
15280	A/X	Reversing Rod, SD waggon	25.1.32
	B	Brake Beam Pivot	_
	C	Brake Lever pin	_
	D	Brake Rod Adjusting nut	_
		Steam Brake Rod	_
		Hand Brake Rod - rear	_
15281	A	Cover for Hand Brake Casing	28.1.33
	B	Gland Ring for hand Brake Casing	_
	D	Weighshaft for hand brake	_
	E	Lever for Weighshaft (hand brake)	_
	F	Outer bearing Hand Brake Weighshaft	_
15282	A	Angle Cleat, DG8	25.1.33
	B	Steering Casing bracket	_
	F/G	Brake Camshaft Lever (steam)	_
	E	Tipping Cylinder Top Cover	_
15283	A	Steam Brake valve Spindle	25.4.33
		Bell - Crank Lever (steam Brake)	_
		Cross-shaft (steam brake)	_
	D	Steam Pipe Support bracket	_
	E	Steam Pipe Support link	_
	F	Steam Pipe Support lug	_
	G	Cover plate	_
15284	A	Position of Studs in Boiler Bottom joint	27.1.33
	B	Position of Studs in Boiler Bottom joint	_
	C	Position of Studs in Boiler Top joint	_
15285	A	Arrangment of Tool Box and front Number plate	27.1.33
	B	Tool Box Wrapper	_
	C	Tipping Injector Flexible Connection bracket	_
	D	Pump Return Pipe (inside tank)	_
	E	Drilling in Tank for Tipp. Injector Return	_
15286	A	Bearing Shaft	28.1.32
	B	Intermediate Coupling	_
	C	Thrust Collar	_
	D	Nut	_
	E	Locking Plate	_
	F - L	Washers	_
	M	Spindle for Bevel Gear (tank end)	_
15287	A	Intermediate Shaft (centre)	31.1.33
	B	Intermediate Shaft (bolster tank end)	_
	C	Intermediate Shaft	_
	E	Intermediate Shaft (boiler end)	_
	F	Coupling Spider	_
	J	Locking Nut	_
	G	Angle for FORd Bearing Bracket plate	_
	H	Angle for Bearing Bracket Plate (tank End)	_
15288		Control Rods	27.1.33
		Control Rod	_
		Control Rod	_
		Fulcrum Pin	_
		Special Jaw	_
	Q	Mechanical Stoker Cross shaft	_
		Cross Shaft - mechanical stoker	_
15289		30" Tyred Railwheel	27.1.33
15290	A	Mechanical Stoker Hand lever	27.1.33
	B/C	Stoker hand lever Quadrant	_
	D	Stoker Hand Lever knob	_
	E	Stoker Hand lever stiff plate	_
	F	Stoker Cross shaft bracket	_
	G	Stoker shaft Bracket (engine end)	_
15291		Arrangement of Trailer Brake Gear	30.1.33
15292		Arrangement of Tar Tank Supports	30.1.33
15293		Arrangement and detail of frame, DG4T and DG6TP	30.1.33
15294	A	Wheel Lock Stop	30.1.33
	B	Bye-pass Valve Lever Spring Bracket	_
	C	Extension Piece (bypass valve lever)	_
	D	Brake Coupling link	_
	E	Injector bracket	_
		Cylinder lubricator bracket	_
15295	A	Spring Clip for breather cap	31.1.33
	B	Hanger for injector
	C	Nipple for Charger Valve	_
	D	Door for Hand Brake Casing	_
	E	Bottom Cover hand Brake Casing	_
	F	Packing Piece for Rev. gear Box hanger	_
	G	Washer for Hand Brake Spindle	_
	H	Nut for hand Brake Spindle	_
15296	A	Spark Arrester Centre vane	31.1.33
	B	Spark Arrester Top vane	_
	C	Spark Arrester Bottom vane	_
15297		Arrangement of Superheater Coils and collector Troughs, LNE Rly 200HP railcar	31.1.33
15298	A	Arrangement of Body Cope Bars and Stiffening angles	31.1.33
	B	Body Side Cope bar	_
	C	Tailboard and headboard Cope bar	_
	D	Headboard and tailboard Top protection angle	_
	E	Body Side Top Protection angle (centre)	_
	F/G	Body Side Top protection angle (ends)	_
	H	Tailboard End Cope bar	_
	J	Tailboard Centre Cope bar	_
15299	A	Tail Lamp Bracket	1.2.33
	B/H	Tail Lamp Bracket	_
	C	Special Tail Lamp Bracket	_
	D	Body Side Top Rail	_
	E/F	Body Side Top Rail Bracket	_
	G	Bottom Tailboard Catch plate	_
15300	A	Detail and Arrangement of Bearing Bracket Plate (boiler end)	1.2.33
	B	Detail and Arrangement of Bearing Bracket Plate (tank end)	_
15301		Alteration to frame	1.1.33
15302	A/B	Brake Camshaft Lever (hand)	1.2.33
	C	Brake camshaft lever (steam)	_
	D	Accelerator Pedal lever	_
	E/G	Control Shaft Lever	_
	F	Lever Bracket	_
15303		Can not find description or date
15304	A/B/J/K	Rear Cover Inside angle	3.2.33
	C	Rear Cover Top angle	_
	D/E	Rear Cover Beading	_
	F/G	Side tray Support	_
	H	Side Tray Support	_
15305	A	Body Side Top protection angle (centre)	1.2.33
	B/C	Body Side Top protection angle (ends)	_
	D	Body Side Cope bar (ends)	_
	E	Body Side Cope bar (centre)	_
	F	Tailboard Top protection angle	_
	G	Arrangement of Cab Back Cross Battens and Cope bars	_
	H	Cab Back Cope bar	_
15306	A	Foot rest	2.2.33
	B	Chain lubricator Bracket	_
	C	RA Box Packing plates (btm)	_
	D	Brake Gear Bracket support plate	_
	E	Brake Gear Bracket Support strip	_
	F	Extra Drilling in Footplate	_
15307		Arrangement of Moving Floor, DG4 waggon	2.2.33
15308		Spare Tyre Carrier frame	3.2.33
15309	A	Coupling Spider	3.2.33
	B	Intermediate Shaft	_
	C	Packing piece	_
	D	Flexible Coupling disc	_
	E	Flexible Coupling disc	_
	F	Guide Bracket (brake rod)	_
	G	Keys	_
15310	A	Extra Drilling in Frame	3.2.33
	B	Extra Drilling in Front Half footplate	_
	C	Brake Bridge Stiffening plate	_
	D/E	Lubricator Drive eccentric	_
15311	A	Tyre Carrier Side angle LH	3.2.33
	B	Tyre Carrier Side angle Rh	_
	C	Tyre Carrier Plate	_
	D	Tyre Carrier Clamping channel	_
	E	Tyre Carrier Side angle boss	_
15312	A	Tyre Carrier Roller	3.2.33
	B	Tyre Carrier Roller pin	_
	C	Tyre Carrier Special stud	_
	D	Nut for Roller Pin	_
	E	Tyre Carrier Clmaping eyebolt	_
	F	Clamping Eye bolt cleat	_
	G	Hardwood Top for Tyre carrier	_
	H	Distance Piece for Tyre Carrier runway	_
15313	A	Cross shaft Bearing	2.2.33
	B	Connecting Link	_
	C	Cross shaft	_
	D	Quadrant	_
	E	End bearing	_
	F	Operating Lever	_
15314		Arrangement of Side Balance Weight Oil Splahsers and Oil Level cocks	3.2.33
15315	A	Frame Front Cross member	3.2.33
	B	Frame Rear Cross member	_
15316	A	Drawbar Bracket boss	16.2.33
	B	Front Drawgear boss	_
	C/D	Tank front support cleat	_
	E/F	Gear Support cleat	_
	G	Frame End Cover	_
	H	Frame End Cover	_
	J	Rear drawbar bracket	_
15317	A	Joint for Hand brake Casing Door
	B	Joint for Hand brake Casinng Bott. Cover	_
	C	Pipe Clip ( feed pump suction etc)	_
	D	Hanger for Feed Pump Suction etc	_
	E	Pipe Clip (feed pump suction etc)	_
	F/G	Bracket for pipe Clips	_
	H/J/K	Hanger for pipe clips	_
	L	Funnel Damper	_
15318	A	Thermo Feed Control valve body	3.2.33
	B	Valve Body Support	_
	C	Operating handle	_
	D	Cross Shaft Lever	_
	E	Operating Quadrant bracket	_
15319		Cab, Canopy and bunker	4.2.33
15320	A	Exhaust Valve cover	4.2.33
	B	Exhaust Valve Cover cap	_
	C	Exhaust Valve	_
	D	Exhaust Valve Stem Guide	_
	E	Modififcation to Exhaust Valve chest	_
	F	Modififcation to Exhaust Valve chest	_
15321	A/B	Tyre Carrier Runway Channel	6.2.33
	C	Runway Channel Angle cleat	_
	D	RH Runway Channel Support plate	_
	E	LH Runway Channel Support plate	_
	F	Stiffening Plate - for cleats and runway channel	_
15322	A	Platform Centre bearer (rear end)	6.2.33
		Platform Centre Beaer (centre)	_
		Platform Front Cross bearer	_
		Tail Rail	_
	D	Platform Centre bearer (front)	_
		Platform Rear Cross bearer	_
15323	A	Byepass valve body	6.2.33
	B	Byepass Valve handle	_
	C	Byepass Valve	_
	D	1" to 1" Coupling nipple	_
	E	Locking Spring	_
		Feed Pump Neck Ring	_
15324	A	Tyre Hoist Roller plate	6.2.33
	B	Spare Tyre Runway cleat	_
	C	Tyre Hoist Roller angle	_
	D	Tyre Hoist Pulley Plate	_
	E	Tyre Hoist Pulley hanger	_
	F	Tyre Hoist Rope Rubbing plate	_
	G	Instruction plate	_
15325	A	Arrangement of Headboard, DG4PT	6.2.33
	B/C	Platform Rear Conrer angle	_
	D	Davit Rope, Chanin and ring	_
	E/F	Davit Socket Bracket and clip	_
	G	Davit Socket flange	_
15326	A	Steam pipe : Throttle Valve to Ball joint	8.2.33
		Extension Spindle	_
	E	Extension Spindle Coupling	_
	B	Steam Pipe - middle	_
	C	Steam Pipe : Engine end assembly	_
	F	Outer Casing extension	_
	G	Inner Funnel extension	_
15327		Water Tank	7.2.33
15328	A	Tipping Pivot Support Bracket	7.2.33
	B/C/J/K	Front Tipping pivot	_
	D	Tipping Pivot Plug	_
	E/F	Support Bracket Welding Strip	_
	G/H	Tipping Platform Front Pivot Bracket	_
15329
15330		Arrangement of Brake gear (front gear)	7.2.33
15331		Lay-out of Steam Pipe	7.2.33
15332	A	Boiler and Tank Support	8.2.33
	B	Boiler and Tank Front support	_
15333	A	Hand Brake Column, railbus	8.2.33
	C	Collar (hand brake weighshaft)	_
	D	pinching Screw (hand brake weighshaft)	_
	E	Speedometer Drive bracket	_
	F	Speedometer Bracket stay	_
	G	Ashpan Chain Catch	_
15334	A	Steam Combining Cone	8.2.33
	B	Distance Piece	_
	C	HP Steam nozzle	_
15335		Arrangement of 15' - 6' platform	9.2.33
15336	A	Tank Rear Support	9.2.33
	B	Tank Rear Support	_
15337		Arrangement of Spare Wheel Carrier and hoisting gear	14.2.33
15338		Detail of Special 6 Ton Frame
15339		Arrangement of Chain Guards	10.2.33
15340		Corner Plate	9.2.33
	C	Side Channel Strut	_
	E	Side Channel Truss (RH)	_
	D	Side Channel Truss (LH)	_
	F	Arrangement of Side channel Truss	_
15341	A	LH Rear Corner Plate	10.2.33
	B	Crane Post Support bracket	_
	C	Floor Plate	_
	D	Davit Socket	_
15342	A	Instrument Retaining plate	11.2.33
	B	Reflector Plate CANCELLED	_
	C	Dash Light Holder	_
	D	Funnel Top Surround Backing strip	_
15343	A	Side and Tailboard Hinge	11.2.33
	B	Tailboard End protection plate	_
	C	Side Rear End protection plate	_
	D	Fixed Side support	_
	E/G	Side Front End protection plate	_
		Side Rail Tope Cope Bar	_
			_
15344	A/F	Main Spary Nozzle	13.2.33
	B	Hand Spray Nozzle	_
	C	Main Spray Nozzle plug	_
	D	Nozzle Cock washer	_
	E	Blind Nut for hand Spray Out Let	_
15345	A	Floating Lever
	B	Guide plate	_
	C	Cover Plate	_
	D	Bearing Bracket	_
	E	Guide plate	_
15346	A	Lever	14.2.33
	B	Cross Shaft	_
	C	Fulcrum Shaft	_
	D	Tornbuckle	_
	E	Brake Rod (intermediate)	_
	F	Bearing Bush	_
	G	Fulcrum pin	_
15347		Arrangement of Davit Socket and hoisting engine	13.2.33
15348	A	Arrangement of Turntable, trailer	15.2.33
	B	Turntable Front Cross Channel	_
	C	Turntable Cross channel	_
	D	Tank Support Flitch Plate	_
15349	A	Support Bracket Bolt plate	20.2.33
	B	Bearer End plate	_
	C	Cylinder Lubricator Bracket	_
	D	Driving Sleeve Nut Lock washer	_
	E	Crankshaft Nut Lock Washer CANCELLED 22.2.33	_
	F	Dust Shield	_
	G	Lubricator Conn Rod End Retaining plate	_
15350	A	Brake Rope Guide Support bracket	15.2.33
	B	Steam Brake Cylinder Support bracket	_
	C	Steam Brake Cylinder Support plate	_
	D	Brake Rope Guide Tube	_
	E	Holding Down Bracket (on frame)	_
	F/H	Holding Down Bracket (on crossbearer)	_
	G/J	Brake Guide Roller eyebolt	_
15351		Arrangement of Throttle and Stop Valve	13.2.33
15352		Arrangement of Tar Pump Drive, sentinel tat sprayer	15.2.33
15353		Arrangement of Tank Cradles	16.2.33
15354		Arrangement of Three Way Tipping
15355	A	Arrangement of Fittings on Superheater Elbow	16.2.33
	B	Arrangement of Fittings on Stop Valve Chest	_
	C	Valve Adapter	_
	D	Distributor Pipe Cover	_
	E/F	Distributor Pipe No.1	_
15356	A	Engine Suspension Channel (front), SD waggon	16.2.33
	B/E	Engine Suspension Channel (rear)	_
	C	Boiler Support channel	_
	D/F	Frame cross stay	_
15357	A/B	Engine Channel cleat	16.2.33
	C/N/K/P	Boiler Support cleat	_
	D/L	Frame Cleat - front	_
	E	Frame Cleat - rear	_
	F	Front Drawbar Pin	_
	G	Drawbar Pin handle	_
	H	Drawbar Pin Link	_
	J/M	Floor Stiffening plate	_
15358		Arrangement of Tar Spraying gear	17.2.33
15359	A	Steam Brake Cylinder, trailer	16.2.33
	B/C	Steam Brake Pull Rod Guide	_
	D	Arrangement of Tyre Carrier (40 x 8 tyres)	_
	E	Tyre Carrier Frame	_
	F/G	Tyre Carrier Frame stay	_
	H/J	Foot Lever	_
15360		Frame for 17" - 0" body	15.2.33
15361	A	Distributor Pipe No.2	21.2.33
	B/C	Distributor Pipe Flange	_
	D	Distributor Pipe flange	_
	E	Distributor Pipe Blank Flange	_
	F	Arrangement Distributor Pipe connection	_
	G/H	Distributor Pipe no.3	_
	J	Distributor Pipe extension	_
15362	A	Tank Support Flitch Plate RH	20.2.33
	B	Tank Support Flitch plate LH	_
15363		Arrangement of Frame, DG4P moving floor	20.2.33
15364		Arrangement of Steam Brake, trailer
15365		Arrangement of Moving Floor body	20.2.33
15366		17" - 0" platform	20.2.33
15367		Water Tank	20.2.33
15368		Arrangement of Tyre Carrier	20.2.33
15369	A/B	Tank Rear Support Cleat	21.2.33
	C/D	Rear Gusset Plate	_
	E/F	Body Support Channel cleat	_
	G/H	Body Support Channel cleat	_
	J/K	Engine Suspension and Body 6th Support channel	_
	L	Body 4th Support channel	_
15370	A	Chain Pinion	17.2.33
	B	Driving Flange	_
	C	Driving Sleeve	_
	D	Driving Sleeve nut	_
	E	Crankshaft Nut	_
15371	A	Clutch Operating disc	20.2.33
	B	Chain Pinion bush	_
	C	Dynamo Driving sprocket	_
	D	Driving Sprocket plate	_
	E	Clutch Lock pin	_
	F	Lubricator Driving pin	_
	G	Grease Nipple body	_
15372
15373	A	Engine and Pump Support Channel (rear)	21.2.33
	B	Engine and Pump Support channel (front)	_
	C	Pump Support Cross channel	_
	D	Flitch Plate Cross channel	_
	E	Croos Channel cleat	_
	F	Engine Bracket cleat	_
15374	A	Sprocket for Tar Pump Hoisting eng	21.2.33
	B	Sprocket Centre for hositing eng	_
	C	Sprocket Centre for Tar Pump	_
	D	Retaining Washer for Tar Pump Centre	_
	E	Sprocket Centre for Hoisting eng	_
	F	Sprocket Centre for Tyre and a tar pump	_
15375		Frame for 15-3 Body	13.3.33
15376	A	Distributor Pipe flange	23.2.33
	B	Distributor Pipe flange	_
	C	Distributor Pipe flange	_
	D	Distributor Pipe flange	_
	E	Distributor Pipe Connection	_
	F	Distributor Pipe Connection	_
	G	Distributor Pipe End cap	_
	H	Spray Nozzle cap	_
15377		Tank for Waste Water from Tar Heater	21.2.33
15378	A	Reflector plate	20.2.33
	B	Gauge Glass deflector	_
	C	Cover for Opening Cab Back	_
15379		Arrangement and Detail of Apron plate	22.2.33
15380	A/B	Apron Plate Stiffening foot	22.2.33
	C	Bunker Throat flange	_
	D/F	Bunker Door Operating Lever	_
	E	Bunker Front angle	_
15381		Arrangement and detail of bunker	23.2.33
15382		Bunker chute	1.3.33
15383	A	Furnace Door	1.3.33
	B	Furnace Door Top Plate	_
	C	Furnace Door Bottom plate	_
	D	Bunker Door	_
	E/F	Bunker Chute Cleat	_
	G/H	Bunker Door Guide Packer	_
	J	Bunker Door Guide Packer LH	_
15384		1000 Gallon Tar Tank	22.2.33
15385		Tank Full (200 galls) Bunker Full ( 10CWTS) Large Boiler, water at half glass
15386	A/B	Body 3rd and 5th Support channel	24.2.33
	C	Body Rear Support channel	_
	D	Body 2nd Support channel	_
	E	Tank Support channel	_
15387		3/4" Combined Feed Water Heater and two Stop valves, railbus	2.9.32
15388	A	Drain Tank for Injector Over flow	23.2.33
	B	Pipe Clip Support	_
	C/D	Drain Tank Support	_
	E	Arrangement of Drain Tank	_
15389	A	Sluice Valve Stop Pin	23.2.33
	B	Sluice Valve Tie Bolt	_
	C	Sluice Valve Spindle sleeve	_
	D	Sluice Valve gland	_
	E/K	Sluice Valve Spindle sleeve	_
	F/H	Sluice Valve Extension Spindle	_
	G	3" Tar Sluice Valve	_
15390	A/K	Drain Tank Suspension channel	23.2.33
	B/C	Tank Suspension Channel cleat	_
	D	Tank Suspension bracket	_
	E	Drain Tank Straps	_
	F	Tank Blocks	_
	G/H	Spray Shield Suspension bracket	_
	J	Operators Platform bracket	_
15391	A	Proposed Arrangement of Flexible Suction pipe	8.2.33
	B/F	Arrangement of Flexible Tube connection	_
	C/D	Top Platform Tie Rods	_
	E	Top Platform Support Bracket	_
15392	A	Arrangement of 3" - 0" Slatted Headboard	24.2.33
		Headboard Knee	_
		Headboard Knee Cope bar	_
	D/E	Headboard Support	_
	F	Headboard Support Cope bar	_
	G	Front catch Bracket	_
15393	A	Arrangement of Hand Spray	27.2.33
	B	Hand Spray Tube	_
	H	Hand Spray Handle	_
	D	Distributor Branch Blank flange	_
	E/G	Platform Hand rail	_
	F	Jockey Sprocket bracket	_
15394	A	Relief Valve	25.5.33
	B	Relief valve Seat	_
	C	Relief Valve cover	_
	D	Relief Valve gland	_
	E	Relief Valve spindle	_
	F	Spring Seat (top)	_
	G	Spring Seat (bottom)	_
	H	Relief Valve Pillar	_
15395	A	Tank Strap	25.2.33
		Tank Strap End	_
	D/E	Spray Gear Suspension Stay	_
	F	Tank Support Packing piece	_
	G	Spray Gear cross stay	_
	H/M	Engine Packing piece	_
	K/L	Tar Spray Shield Side plate hook	_
15396		Arrangement of Tar Spray Shields	25.2.23
15397		15'-3' Platform (low loader)	27.2.33
15398	A	Relief Valve Cross Bar	27.2.33
	B	Relief Valve adjusting screw	_
	C/D	Sluice Valve Spindle Collar	_
	E	Sluice Valve Spring Stud	_
	F	Sluice Valve Spring nut	_
		Gland Studs	_
	J	Brake Rope Pulley bolt	_
		Brake Rods Guide bolt	_
15399	A/B	Support Channel cleat stays	27.2.33
	C/D	Rear Support Channel cleat stays	_
	E/F	Engine Side Suspension plate	_
	G	Body Side Stanchion	_
	H	Body Side Stanchion cleat	_
	J	Rear Catch Bracket	_
15400	A	Tar Spray Shield Top Plate (centre)	27.2.33
	B	Tar Spray Shield - top plate (LH end)	_
	C	Tar Spray Shield - top plate (RH end)	_
15401		Proposed Arrangement of DG waggon fitted with 1300 Gallon tank	27.2.33
15402		Arrangement of Hand Brake Dual Control	19.2.33
15403	A/B	Tar Spray Shield Top Plate angles	27.2.33
	C	Connecting Block for Extensions	_
	D/E	Tar Spray Shield Extension (top plate)	_
	F/G	Extension Top Plate angle	_
	H	Connecting Bar for Shield extensions	_
	K	Tar Spray Shield - end plate peg	_
15404	A	Side Plates for tar Shields	27.2.33
	B/C	Tar Shield Extension Side plate	_
	D	Tar Spray Shield End plate	_
	E	Side Plate Canvas Fixing bars	_
15405	A	Tar Spray Shield Extension Canvas Fixing bar	28.2.33
	B	Tar Spray Shield - End Canvas fixing bar	_
	C	Eyebolt for Tar Spray Shields	_
		Eyebolt Pin for tar Spray shields	_
	E	Pipe Clip for tar Spray	_
	F	Stiffening Plate for Pipe clip	_
	G	Pipe Clip for Tar Spray pipe - on channels	_
	H	Hardwood Block for pipe Clip 15405 E	_
15406		Arrangement of Wheels and Axles	28.2.33
15407		Bogie Axles	3.3.33
15408		30" Dia Solid Wheel	4.3.33
15409	A	Brake Drum Centre (half)	28.2.33
	B	Brake Rope Pulley bracket	_
	C	Brake Rope Pulley	_
	D	Compensating link	_
	E	Brake Link	_
15410	A	Tipping pivot Cross channel	1.3.33
	B	Rear Cross channel	_
15411		Frame for three way Tipping waggon (6 wheeler)	1.3.33
15412		Arrangement of boiler	26.2.33
15413	A	Tar Spray Shield - canvas side flaps	1.3.33
	B	Tar Spray Shield - canvas end flaps	_
	C/D	Tar Spray Shield - canvas extension flap	_
15414	A/B	Holding Down Bracket	1.3.33
	C	Locating Bracket	_
	D	Locating Peg	_
	E	Hot Air Pipe Bend Flange	_
	F/K	Arrangement Hot Air Pipe bend	_
	G/J	Hot Air Pipe flange	_
	H	Hot Air Pipe Bend Nipple	_
15415		Brake Calculations	1.3.33
15416		Half Firegrate, railbus	1.3.33
15417	A/G	8 Wheeler Front Mudguard	1.3.33
	B	Arrangement of Front Mudguard	_
	C	Front Mudguard Rear stay	_
	D	Front Mudguard Rear bracket	_
	E/F	Front Mudguard Centre bracket	_
15418	A/B	Side rear End protection plate	1.3.33
	C	Tailboard End protection plate	_
	D/E	Side Front End protection plate	_
	F	Headboard Squeegee Cope bar	_
	G	Headboard Centre stiffener	_
	H	Stiffener Washer plate	_
	J/K	Headboard Squeegee Plate	_
15419	A/B	Side rail angle	2.3.33
	C	Wheel Arch	_
	D/E	Tail rail Hinge bracket	_
	F	Trap Door support	_
15420
15421	A/H	Pump Return Pipe flange	2.3.33
	B	Relief Valve and Pump Return Pipe flange	_
	C	Pump Suction Bend	_
	D	Pump Suction Cock Lever boss	_
	E	Delivery Cock Lever boss	_
	F	Pump Suction Cock lever	_
	G	Delivery Cock lever	_
15422		Arrangement of Brake gear	2.3.33
15423	A	Tipping Cylinder Cross channel	3.3.33
	B	Tipping Cylinder Cross channel (front)	_
	C/D	Tipping Cross channel cleat	_
	E	Rear Cross Channel cleat	_
	F/G	Tipping pivot Cross channel cleat	_
	H	Rear Cross Channel packing piece, CANCELLED 26.4.33	_
15424	A	Arrangement of Steam Trap Brackets	3.3.33
	B	Steam Trap Bracket Support	_
	C	Steam Trap Bracket	_
	D	Steam Trap Bracket	_
	E/F	Distributor Pipe flange	_
15425		Stop Valve chest, SD waggon
15426	A	Arrangement of Drawbar Bracket	6.3.33
	B	Drawbar Bracket Support plate	_
	C/D	Support Plate cleat	_
	E	Body Side Stanchion Washer plate	_
15427	A	Headboard Centre Squeegee plate	6.3.33
	B/C	Headboard Support angle	_
	D	Headboard Stiffening angle	_
	E	Support Angle Washer plate	_
	F	Side Squeegee Cope bar	_
15428	A	Cleaning Valve elbow	6.3.33
	B	Neck Ring	_
	C/E/M	Packing Piece (bottom)	_
	D/F	Packing piece (top)	_
	G	Cam Lever	_
	H	Bye-pass valve pad	_
	J	Lubricator Shaft	_
	K	Lubricator Shaft bush	_
15429	A	Bumper Bracket	1.3.33
	B	Bumper Tube	_
	C	Bumper bracket cap	_
	D	Speedometer Generator Driving Pulley	_
	E	Speedometer Generator Driven Pulley	_
	F	Speedometer genrator Support bracket	_
15430		CSK HD Bolt with Saw Cut	8.3.33
	B/J	Cam Lever Pin	_
	C	(text missing) Return pipe Hook Bolt	_
		3/8" BSF Stud (screwed into aluminium)	_
		1/2" BSF Stud (screwed into aluminium)	_
		Steering Weighshaft Adjusting set pin	_
	G	Skid Chain bolt	_
		Boiler Foot bolt	_
15431		Arrangement of Trailer with 1000 Gall Tar Tank
15432	A	Front Axle Felt cover	8.3.33
	B/C	Front mudguard Rear stay	_
	D	Stoker bell crank Bracket	_
	E	Stoker bell Crank Lever	_
15433	A	Arrangement of Sprayer Nozzle	8.3.33
	B	Sprayer Body	_
	C	Sprayer Cock	_
	D	Sprayer Nozzle	_
	E	Sprayer (text missing) Stop Plate	_
	F	Sprayer Spring nut	_
15434		A/B=Left/Right hand feedheater body	28.3.33
15435		Rear Bogie Spring Bracket (RH)	11.3.33
15436		Rear Bogie Spring Bracket (LH)	14.3.33
15437	A	Distributor Branch	8.3.33
	B	Steady Pipe Extension Bend	_
		Spray Pipe bend	_
	C/D	Spray and extension pipe flnages	_
	E	Spray Pipe Return Bend	_
15438		Arrangement of Tar Tank and Spraying gear	8.3.33
15439	A	Feed Pump Valve Nameplate	8.3.33
	B	Blower Valve Nameplate	_
	C	Injector Valve nameplate	_
	D	Steam Brake Valve nameplate	_
	E	Steam Heating valve nameplate	_
	F	Pressure Gauge Valve nameplate	_
	G	Lubricator Steam Valve nameplate	_
	H	Notice Plate (throttle)	_
	J	Oil Tank Capacity Gauge	_
15440		Assembly of Control Column (eng end)	20.3.33
15441		Arrangement of Aux. Bunker, DG6P	9.3.33
15442		Fire-slicer, railbus	9.3.33
15443	A	Arrangement of Stuffing Box for Hoisting eng	9.3.33
	B	Stuffing Box for Hoisting eng	_
	C	Hoisting Engine piston	_
	D	Stuffing Box nut for hoisting eng	_
	E	Stuffing Box Gland for hoisting eng	_
15444	A	Arrangement of Turntable	8.3.33
	B	Turntable Front Cross channel	_
	C/D	Turntable Side channel	_
	E	Cross channel cleat	_
		Turntable Ring (top)	_
15445		18" - 0" Platform	7.6.33
15446	A	Gearbox Tower cap stud	31.1.34
		Castle Nut	_
	C/J	Whit Bolt	_
	D	Special Stud	_
	E	Whit Bolt	_
	F	Set Screw	_
	G	Whit Stud	_
	H	Whit bolt	_
15447	A/G	Tyre carrier Stay	27.3.33
	B	Tyre carrier clip	_
	C/J	Tyre Carrier base	_
	D/F	Oil Filler	_
	E	Cheko rivet	_
15448	A/B/C/D	Side Tray Supports	15.3.33
	E/F	Rear Mudguard Support angle	_
	G	Rear Mudguard	_
	H	Rear Mudguard Support	_
	K/L	Top Platform Rear Supports	_
	M	Top Platform Front support	_
15449	A	Cover for opening in cab back	10.3.33
	B	Reversing lever Bracket plate	_
	C	Reversing Shaft Brake packer	_
	D	Spray<Extension Pipe flange bolt	_
	E	Tie Bolt Distance Piece	_
	F/G	Sprayer Operating Rod extension	_
	H	Sprayer Operating rod	_
15450	A/B	Rear Mudguard	10.3.33
	C	Rear Mudguard Rear stay	_
	D/E	Rear Mudguard Front stay	_
	F/G	Rear Mudguard Inside Washer plate	_
	H/J	Rear Mudguard Rear support	_
15451		Arrangement Flex Metallic Suction pipe	10.3.33
15452	A	Tank Strap Clamping plate	11.3.33
	B	Tank Block Dowel plate	_
	C	Tyre Carrier Hinge plate	_
	E/F	Tank Block	_
	D	Bearer End plate	_
	G	Tank Strap End	_
	H	Tank Block Dowel pin	_
15453	A	Arrangement of Relief Valve (steam jacketted)	6.3.33
	B	Arrangement of Sluice Valve	_
15454		Arrangement of Frame, trailer	14.3.33
15455	A/B	Frame side channel	14.3.33
	C	Frame Front Cross channel	_
	D/G	Frame Cross channel	_
	E	Frame rear Cross channel	_
	F	Turntable Pivot channel (top)	_
15456		Feedheater Coil	10.3.33
15457	A	Feedheater Bottom cover	13.3.33
	B	Special Angle Coupling nipple	_
	C	1 1/4" Jam Nut	_
	D	Special Coupling nipple	_
	H	Feedheater Coil nipple	_
	E/F	Special 3/8" BSF Stud, CANCELLED 24.8.33	_
	G	Special 1/2" BSF Stud, CANCELLED 24.8.33	_
15458	A	Brake Cylinder cover	12.3.33
	B	Steam Brake Piston	_
	C	Steam Brake Link	_
	D	Steam Brake Link front	_
	E/F	Steam Brake Link - rear	_
	G/J	Brake piston rod	_
	H	Steam Brake Link guide	_
15459	A/B	Rear Spring Channel	14.3.33
	C/D	Rear Spring Cross channel	_
	E/F	Rear Spring Channel bracket	_
	G	Brake Pulley Support channel	_
	H	Drain Tank Suspension Channel	_
	J/K	Brake Rope Guide roller bracket	_
	L/P	Tailboard Stay Bracket	_
	M/N	Tailboard Catch bracket	_
15460	A	Arrangement of Tyre carrier, trailer	14.3.33
	B	Tyre carrier Stay (rear)	_
	C	Tyre Carrier Stay (front)	_
15461	A	Arrangement of Tool Box	14.3.33
	B/C	Tool Box Band	_
	D/F	Cab back bracing	_
	E	Cab Corner Bracket	_
15462	A	Water Lifter body	14.3.33
	B	Float Buffer	_
	C	Buffer clip	_
	D	Cab Nameplate	_
15463		Lubricator Body, SD waggon	15.3.33
15464	A	Bell Crank Lever bush, SD waggon	15.3.33
	B	Bell crank Lever pin	_
	C	Driving Lever pin	_
	D	Stoker Conn Rod bush	_
		Stoker Connecting Rod	_
		Stoker Driving Rod	_
	V	Brake Shoe Spring Rod Head	_
15465		Rear Half Foot Plate (extra dr ig)	14.3.33
15466		Arrangement and detail of Saloon Type canopy	2.11.32
15467	A	Lubricator Shaft handle	16.3.33
	B	Worm Wheel	_
	C	Lubricator Cylinder	_
		Lubricator plunger	_
	H/E	Worm Spindle	_
	F	Lubricator Cam	_
15468		Araangement and Detail of frame	17.8.33
15469		Rear Wheel Hub, SD6 (trailing axle)	16.3.33
15470	A	Torque Rod Bracket	20.3.33
	B	Rear Axle Nut	_
	C	Rear Wheel Cover, CANCELLED 3.4.33	_
15471	A	Rear Axle	21.3.33
	B	Roller Bearing Adjusting Washer	_
	C	Oil Seal Ring	_
15472		Special First Aid Locker	16.3.33
15473	A	Hoisting Engine Exhaust steam trap	16.3.33
	B	Boss for exhaust Steam trap	_
	C	Drain Boss for ex Steam trap	_
	D	Exhaust Steam trap support, NOT USED	_
	E	Steam Brake to Exhaust nipple	_
15474	A/B	Brake Beam End	7.6.33
	C	Brake Beam	_
	D	Brake beam	_
	E	Brake beam Roller	_
	F	Roller Jaw	_
15475	B/C	Plunger Spring (long)	17.3.33
	F	Front Brake Rod spring	_
	D	Driving Rod End Cover spring	_
	E	Brake Rod Relieving spring	_
	H	Relief valve spring	_
	J	Relief valve spring	_
15476		Position of and Alteration to Gear Change gear	17.3.33
15477	A	Spray Pipe	20.3.33
	B/C	Spray Pipe Extension	_
	D/F	Spray Pipe Stiffener	_
	E	Sprayer Cock Lever catch	_
15478	A	Arrangement of Rear Mudguards	17.3.33
	B/C	Rear Mudguard Support bracket	_
	D	Rear Mudguard Centre bracket	_
	E/F	Rear Mudguard Support bracket	_
	G	Hand brake Lever	_
15479		Arrangement of Ends of Frame, 200HP rail bus	1.5.33
15480		Aux. Bunker	20.3.33
15481	A	Venturi Funnel	18.3.33
	B	Funnel Outer Casing	_
15482		Arrangement of Tar Pump Drive	20.3.33
15483	A/B	Sprayer operating Rod lever	20.3.33
	C	Sprayer Cock lever	_
	D/E	Sprayer Operating Ropd bracket	_
	F	Sprayer Operating Rod bracket	_
	G	Sprayer Operating handle	_
	H	Sprayer Bracket boss	_
	J	Sprayer Operating Shaft bracket	_
	K	Sprayer Operating Shaft	_
15484	A	Top Spark Arrester Vanes	14.2.33
	B	Bottom Spark Arrester vane	_
	C/D	Bunker Door Guide	_
15485	A/B	Brake Block Hanger	1.6.33
	C	Brake lever	_
	D	Brake Lever Swing link	_
	E	Brake Block Adjusting pin	_
	F	Brake lever	_
15486	A	Brake Beam Guide bracket	1.6.33
	B	Brake Beam Guide Bar	_
	C	Adjusting Spring Collar	_
	D/E	Brake Block Adjusting bolt	_
15487	A/B	Brake Hanger Bracket cap	31.5.33
	C	Brake hanger Bracket	_
15488		Crankcase	28.4.33
15489	A	Aux. Bunker Stiffener	21.3.33
	B	Aux. Bunker Door fastener	_
	C	Door Fastener bracket	_
	D/E/H/J	Air Compressor knee	_
	F	Compressor Knee angle	_
	G	Stabiliser Bracket, NEVER USED	_
15490		Reversing Control Details	21.3.33
15491	A	Pulley Hanger	20.3.33
	B	Fair -lead	_
	C	Steam Cock Lever	_
	D	Steam Cock Operating lever	_
	E	Sprayer Cock Spanner	_
	F	Stop valve Adaptor	_
		Special Washer	_
	H	Arrangement of Fittings on Stop Valve chest	_
15492	A	Dividing Wall Firebar	21.3.33
	B	Dividing Wall Firebar Support	_
	C	Firebar Support locking bar	_
15493		Arrangement of Tar Spray Shields	21.3.33
15494	A	Tar Spray Shield Top Plate (centre)	21.3.33
	B/C	Tar Spray Shield Top Plate extension	_
	D/E	Tar Spray Shield Top Plate (R and LH ends)	_
	F	Tar Spray Shield Stiffener	_
15495	A	Tar Spray Shield Side Plate	22.3.33
	B/C/F/G	Tar Spray Shield Extension Side plate	_
	D	Tar Spray Shield End Plate	_
15496	A	Tar Spray Shield Lower Side Plates	24.3.33
	B/G	Tar Shield Lower Extension Plates	_
	C	Tar Spray Shield Lower End Plate	_
	D/E	Tar Spray Shield End and Extension Canvas Fixing bar	_
	F/H	Tar Spray Shield Side Canvas Fixing bar	_
15497	A	Buffer head and Shank	14.3.33
	B	Buffer Shank Guide	_
	C	Buffer Spring Washer (top)	_
	D	Buffer Spring Washer (bottom)	_
	E	Washer (buffer)	_
	F	Buffer Spring Side Cover plate	_
15498	A	Blank Flange for Hot Air Pipe	22.3.33
	B	Blank Flange for Return Pipe	_
	C	Distribution Pipe Flange	_
	D	Delivery Pipe Cap Chain bracket	_
	E	Delivery Pipe Clip	_
	F	Hose Carrying Bracket Hanger	_
	G	Arrangement of Hose Carrier	_
	H/J	Tank Carrying Boards	_
15499