Drawing No				Description		Date
	15000		Arrangement of Pivot		7.9.32
	15001
	to		Files between these two numbers appear to be missing
	15049
	15050		Arrangement and Detail of Frame for DG6P waggon with 21"-0" platform		29.11.32
	15051		Arrangement and Detail of Frame		30.11.32
	15052	A	Compressor Suspension Channel		30.11.32
		B	Dynamo and tyre Pump Suspension Channel		_
		C/D	Dynamo and tyre Pump Channel Cleat		_
		E	Rear Cross Channel Stiffener		_
		F	Tank Suspension channel		_
	15053	A	Air Compressor Bracket		3.12.32
		B	Compressor Bracket Plate cleat		_
		C	Compressor Bracket Plate		_
		D	Dynamo and Compressor Bracket		_
	15054	A	Arrangement of Waggon fitted with Special Jib Crane for Lifting cable drums		30.11.32
		B	Arrangement of Waggon fitted with Special Jib Crane for Lifting cable drums		_
	15055	A	Arrangement of Special Drawbar bracket		30.11.32
		B	Rear Drawbar Support Channel		_
		E/F	Cross bearer Flitch plate		_
		C/D	Frame Rear Corner plate		_
	15056	A/B	Engine Side Suspension Plate		1.12.32
		C	Radius Rod Bracket plate		_
	15057	A	Alterations to Tractor frame, timber hauling tractor		2.12.32
		B/C	Auxiliary Frame Channel		_
	15058	A/B	Rear Mudguard Bracket		9.1.33
		C	Pipe Clip		_
		D	Pull Off Spring Rod		_
		E/H	Snubber Chain Bracket		_
		F/G	Snubber Chanin Bracket(front)		_
	15059	A/J	Tail Rail Cope Bar		2.12.32
		B	Arrangement of Special Roping hook		_
		C	Side washer Plate (near side)		_
		D	Side Extension Washer plate		_
		E	Fixed Side Support		_
		G	tail Rail Cope bar		_
		F/H	Platform front Corner angle		_
	15060		Boiler Development, SD waggon		7.3.33
	15061		Mechanical Stoker Bunker, railbus		3.12.32
	15062	A	Fusible Plug		2.12.32
		B	Boiler Filling Hole Boss		_
		C	Shut off valve		_
		D/J	Check valve bush		_
		E	Check valve Baffle Plate		_
		G/H	Boiler Foot (side)		_
		F	Main Bearing Nut Lock Washer		_
	15063	A	Position of Plugs, Butt strap etc		2.11.32
		B	Position of Plugs, Butt strap etc		_
	15064		Arrangement of and Detail of Drilling in Rear Mudguard
	15065	A	Housing Cover		2.12.32
		B	Crankshaft End Bush		_
		C	Control Spindle Lever		_
	15066	A	Compensating link Guide Bracket support		5.12.32
		B	Release Foot lever bracket plate		_
		C/D/N/P	Rear Mudguard Rear Stay		_
		E/Q	Rear Mudguard Centre Stay		_
		G	Drain Pulley Bracket Plate		_
		H/J	Rear Mudguard Front Stay		_
			Rear Mudguard		_
	15067	A	Mechanical Stoker Support(bunker)		2.12.32
		B	Bunker Support bracket		_
		C	Bunker Support Stay		_
		D	Operating Rod Bush		_
		E	Partition and Support Bracing angle		_
		F	Bunker Door Locating quadrant		_
	15068	A	Arrangement Winch Eng. Crankcase Drain Gear and Modifications to Crankcase and Winch plate for same		5.12.32
		B	Drain Cook Distance Piece		_
		C	Crankcase Drain Cock		_
		D	Crankcase Drain Cock Plug Extension		_
		E	Sprag Bracket cleat		_
	15069	A	Tyre Pump Bracket		7.12.32
		B	Tyre Pump Driving Sprocket		_
		C	Crankshaft Nut		_
		D	Centre Rope Guide Roller packing		_
		E	Arrangement of Centre rope guide Rollers		_
	15070		Boiler development, SD waggon		14.3.33
	15071		21"-02 x 7"-0 3/4" brewers body		5.12.32
	15072		Arrangement and detail of Frame, DG 6 waggon		20.1.33
	15073		Water Tube Boiler		30.11.32
	15074	A	Brake Release Spring bracket		6.12.32
		B	Rear Spring Channel Bracket		_
		C/D	Turntable Pivot Channel cleat		_
		E	Turntable Ring Packing piece		_
		F	Turntable Front Channel Cleat		_
		G	Trailer Brake Rope Eye-bolt		_
		H	Brake Rope Eye-bolt support		_
		J	Reversing Rod Guide bracket		_
	15075	A	Dynamo and tyre - Pump Drive cover		6.12.32
		B	Clutch Control Spindle		_
		C	Jockey Sprocket spindle		_
		D	Tank Strap		_
		E	Ball race Distance piece - jockey sprocket		_
		F	Reversing Rod (rear)		_
	15076		Front Axle Trunnion		7.12.32
	15077		Rear Bogie Suspension Bracket		7.12.32
	15078	A	Bunker Chute		15.12.32
		B	Door Guide packing plate		_
		C	Door Quadrant Pin		_
		D	Bunker Door		_
		E	Bunker Door Handle		_
	15079		Sandbox, railbus		27.2.33
	15080	A	Front Spring Pad		8.12.32
		B	Front Spring Pad bush		_
		C	Front Spring Pad Linett		_
		D	Front Spring Pad cap		_
			Thrust Pad		_
	15081	A	Tractor Rear Wheel Extension		8.12.32
		B	Tractor Spud Extension		_
	15082	A	Canopy Roof pressing		7.12.32
		B	Apron Plate Pressing		_
	15083	A	Sandbox Lid, rail bus		8.12.32
		B	Sand Valve		_
		C/F	Sand Box Bottom Cover		_
		D	Catch for Sandbox Lid		_
		E	Sand valve Spindle		_
	15084	A/B	Sand Box Support		8.12.32
		C/D	bracket for Sand Box support		_
		E	Bracket Packing piece		_
		F	Hand lever Shaft Bracket		_
		G	Fulcrum Bracket (sanding handlever)		_
	15085	A/H	Front Spring, DG8		9.12.32
			Bridge Piece bolt		_
			Distance Pieces		_
			Spring Bolts		_
		G	Bridge Piece		_
	15086		Arrangement of Frame for 18"-0" platform		9.2.32
	15087	A	Front Axle, DG8		28.12.32
		B	Front Axle Support plate		_
		C/D	C - Long Steering Lever, D - Short Steering lever		_
	15088		Rear Bogie Spring Bracket		9.12.32
	15089		Proposed Skip Chain for tractor with 42" x 9" Pneumatic twin rear tyres		9.12.32
	15090		Stop valve Chest		20.12.32
	15091	A	Tool Box		2.1.33
		B	Plate for Drivers Seat		_
		C	Washer for Acc Box door		_
	15092	A	Trailer Axle		10.12.32
		B	Arrangement of Trailer Pivot		_
		C	Arrangement of Front Mudguard		_
		D	Arrangement of Rear Mudguard		_
	15093		Model of Experimental cab		12.12.32
	15094	A	Stop Valve Seat		10.12.32
		C	Release Valve body		_
		D	Release Valve body		_
		E/G	Stop valve Spindle		_
		F	Stop Valve Chest Cover		_
	15095
	15096	A	Torque Rod bracket		12.12.32
		B	Cross tube Bracket		_
		C	Cross Tube		_
	15097		Steering Gear Casing		13.12.32
	15098	A	Sanding lever, rail bus		12.10.32
		B	Lever (sanding gear)		_
		C	Sanding Layshaft		_
		D	Sanding Hand lever		_
		E	Sand Hand lever shaft		_
	15099	A	Arrangement of Turntable		15.12.32
		B/C	Turntable Side Channel		_
		D/E	Turntable Cross channel		_
		F	Turntable Front Cross Channel		_
	15100
	15101		Arrangement of frame, sports model tractor
	15102	A	Safety Valve body, shaft drive waggon		15.12.32
		B	Safety Valve Flange		_
		C	Pressure Gauge body		_
	15103		Arrangement of Trailer Frame and Platform		14.12.32
	15104	A	Rear Axle		15.12.32
		B	Spring Slipper plate		_
		C	Engine Suspension link		_
			hand Brake Pull Rod		_
	15105	A	Rear Bogie Spring, SD waggon		14.12.32
		B/E	Rear Bogie Spring		_
		C	Front Spring		_
		D	Rear Spring		_
	15106	A/B	Trailer Side Channel, trailer		15.12.32
		C	Arrangement of Turntable		_
		D	Turntable Front Cross channel		_
		E	Turntable Centre Cross channel		_
	15107		Arrangement and Detail of rear Cover and Arrangement of rear mudguards		19.8.32
	15108		Arrangement of Frame		15.12.32
	15109	A/B	Side channel, tipping trailer		15.12.32
		C	Frame front Cross channel		_
		D	Frame Rear Cross Channel		_
		E	Frame cross Channel		_
		F	Turntable Pivot Channel (top)		_
	15110	A/B	Tipping Cylinder Support channel		15.12.32
		C/D	Rear Spring Channel		_
		E/F	Rear Spring Channel Cross channel		_
		G	Spring Bracket (rear) packing piece		_
		H	Turntable Pivot channel (bottom)		_
		K	Vertical Cope Bar		_
		J	Body Side Hinge Bar		_
	15111	A/B	Torque Rod, SD waggon		15.12.32
		C	Spring Shackle pin		_
		D	Spring Clamp stud		_
		E/F	Tailboard Hinge		_
		G	Tailboard Strut		_
	15112	A	Sand Lever Guide plate		15.12.32
			Operating Rod Hanger		_
		C	Hanger Bracket		_
			Sanding Gear Control Rod		_
		L/M	Cable Pillar (sand gear)		_
		P	Sanding Layshaft Bracket		_
		K/N	Pillar bracket		_
	15113	A	Arrangement of Side Channel Truss		16.12.32
		B/C	Side Channel Truss		_
		D	Side Channel strut		_
		E/F	Rear Spring Channel		_
		G	Frame Centre Cross channel		_
		H	Front Pivot Cross channel		_
	15114	A	Rear Spring Rear Bracket		16.12.32
		B/C	Rear Spring Front bracket		_
	15115		18"-0" x 7"-4 1/2" platform		10.12.32
	15116	A	Contol Disc (sand gear)		16.12.32
		B	Control Disc (sand gear)		_
	15117		Arrangement of Rear Cover		17.12.32
	15118	A	Steering Drop Lever, SD waggon		17.12.32
		B	Steam Brake Lever - rear brake		_
		C	Steam Brake Shaft		_
			Steering Drop Lever, SD waggon		_
	15119	A/B	Brake Camshaft Lever (steam)		19.12.32
		C/H	Brake Camshaft Lever (hand)		_
		D/E	Brake Camshaft Lever (hand)		_
		F/G	Brake Camshaft Lever (steam)		_
	15120
	15121	A/C	Front Spring Rear bracket		19.12.32
		B	Engine Suspension Link bracket		_
	15122		Arrangement of 18" - 0" platform		19.12.32
	15123	A	Tyre carrier Stay, trailer		19.12.32
		B	Arrangement of Tyre Carrier		_
		C	Arrangement of Headboard		_
		D	Headboard Cope bar		_
	15124
	15125		Front and Rear Footplate, sports model tractor		20.12.32
	15126		Firebricks for Combustion Chamber, geared car
	15127
	15128	A	Dynamo Spur Pinion		20.12.32
		B	Dynamo Spur Wheel		_
		C	Arrangement of Tank Drain Pipe		_
	15129	A/B	Tailboard and headboard Support angle		21.12.32
		C/D	Body Support angle		_
		F/K	Body Stanchion		_
		G/H	Corner angle (near side)		_
		E	Headboard and Tailboard Bottom angle		_
		J	(near side) Side Bottom angle		_
	15130	A	Top Spark Arrester Vane No.5		21.12.32
		B	Spark Arrester Vanes No.6		_
	15131		Tar Tank 1000 galls		22.12.32
	15132	A/B	Arrangement and Detail of Front Mudguards		21.12.32
		C	Front Mudguard Stiffening plate		_
		D	Front Roller bracket		_
		E	Arrangement Front Guide rollers		_
	15133		Tipping Platform, tipping trailer		22.12.32
	15134		Frame		22.12.32
	15135	A/E	Control Box, shaft drive waggon		21.12.32
		B/F	Control Box Cover		_
		C	Stop Valve Cam, CANCELLED		_
		D	Cam Tappet guide		_
	15136
	15137	A/B	Brake Lever		23.12.32
		C	Reversing Lever shaft		_
		D	Reversing Rod End (engine end)		_
	15138	A/B	Side Extension Support angle		23.12.32
		C/D	Corner Angle ( off side)		_
		E	Extension Side Channel		_
		F/G	Side End Protection plate		_
		H	Hose Carrying Bracket Support		_
		J	Arrangement of Steam Trap		_
		K/L	Steam Trap Support bracket		_
	15139	A	Cam Tappet		23.12.32
		B	Packing Gland		_
		C	Control Shaft		_
		D	Oil Retaining Gland		_
		E	Gland Spring		_
		F/G	Boiler Foot (side)		_
		H	Boiler Foot (rear)		_
	15140	A	Steam Valve , hoisting engine		28.12.32
		B	Plug for Control Valve Chamber		_
		C	Eccentric Rod		_
		D	Eccentric Strap		_
		F	Eccentric Strap Bolt		_
		E	Valve Spindle		_
	15141		Tipping Cylinder, SD waggon		28.12.32
	15142	A	Reversing Lever, sports model tractor		28.12.32
		B	Steam Brake Rear Support angle		_
		C	Steam Brake Front Support angle		_
		D	Control Lever		_
		E	Reversing Rod (front)		_
	15143		Crankshaft, hoisting engine		28.12.32
	15144	A	Bogie Check Bracket, railbus		30.12.32
		B/C	Bogie Check Bracket angle		_
		D	Safety Bar		_
		F	Boss for Steam pipe (lub. Connection)		_
		G	Suspension Link Cap nut		_
		E	Clamp for safety Bar		_
		H	Link Support plate		_
	15145	A/C	Tipping Cylinder bracket		31.12.32
		B	Tipping Crosshead		_
	15146	A	Dynamo Saddle, railbus		28.12.32
		B	Dynamo Saddle Bracket		_
	15147	A	Bumper		29.12.32
		B	Bumper stay		_
		C	Drawgear Cover plate		_
		D	Bumper Stay Packing piece		_
		E	Hanger for Accumulator box		_
		F	Hanger for Accumulator box		_
		G	Hanger bracket for Accumulator box		_
	15148		Rear Hub, tractor		20.1.33
	15149		Arrangement of 13" - 8" body with 24 sides and 12" extension		29.12.32
	15150	A	Dynamo Clamping Straps, railbus
		B	Clamping Strap pin		_
		C	Dyanmo Saddle pin		_
		D	Clamping Strap End pin		_
		E	Saddle Bracket hinge pin		_
		F	Dynamo Bracket bush		_
		G	Dyanmo Bracket clamp		_
	15151	A	Catch Operating Rod, tipping trailer		21.12.32
		B	Body Side Top Stiffening channel		_
		C	Side Extension Bottom Stiffening angle		_
		D	Catch operating lever		_
		E	Operating Rod Guide plate		_
	15152	A	Proposed Modification to Side Bars		10.1.33
		B	Side Firebars		_
		C	Side Firebar End Support		_
		D	Side Firebar Support		_
		E	End Support pin		_
		F	Firebar Locking bar		_
	15153	A	RH Water Tank, SD waggon		30.12.32
		D	LH Water Tank		_
	15154	A/F	RH Water Tank Bottom pressing, SD waggon		31.12.32
		B/E	RH Water Tank Top Pressing		_
		C/G	LH Water Tank Top Pressing		_
		D/H	LH Water Tank Bottom pressing		_
	15155	A	Water Tank Front Foot , SD waggon		2.1.33
		B	Water Tank Rear Foot		_
		C	Water Tank Connecting Hose nipple		_
		D	Water Tank Byepass Valve pad		_
		E	Water Tank Vent Pipe		_
		F	Feedheater Stud Boss		_
		G	Thermo - feed Valve pad		_
		H	Cross Shaft Bearing Pad		_
	15156	A/B	Sprag Bracket, timber hauling tractor		30.12.32
		C/D	Sprag Bracket, timber hauling tractor		_
		E	Sprag Bracket boss		_
		F	Sprag Fulcrum bolt		_
		G	Sprag Fulcrum bolt nut		_
		H	Winch Carrying		_
	15157	A	Cylinder Cover, hoisting engine		30.12.32
		B	Coupling for Tar Pump		_
		C	Key for Tar Pump Coupling		_
		D	Coupling for 2 1/2 Tar Pump		_
	15158	A	Nozzle Stuffing box		30.12.32
		B	Combined Air and Steam Nozzle		_
		C	LP Steam Nozzle		_
		D	Nozzle Gland		_
	15159	A	Arrangement of Sparg		3.1.33
		B/C	Winch Carrying Plate stay		_
		D	Spray Stop		_
		E	Sprag Gusset		_
	15160	A/B	Steam Brake Cylinder, SD waggon - 4 wheeler		31.12.32
		C/D	Steam Brake Cylinder, SD waggon - 6 wheeler		_
	15161		Modifications to Frame for (text missing)		2.1.33
	15162	A	Dynamo Driving Pulley (split)		2.1.33
		B	Dynamo Pulley		_
		C	Speedometer Generator Driving pulley		_
	15163	A	Spark Arrester Casing, rail bus		2.1.33
		B	Funnel Joint Ring		_
		C	Spark Arrester Support bracket		_
		D	Funnel Damper		_
	15164		Arrangement of Spark Arrester		7.1.33
	15165		Superheater Elbow		2.1.33
	15166	A	Firebox Nozzle Connection		2.1.33
		B	Gland Studs		_
		C	Crosspiece		_
		D	HP Steam Nozzle		_
	15167		Arrangement of Dynamo Drive		3.1.33
	15168	A/B	Sprag Channel		3.1.33
		C	Sprag Channel end		_
		D	Sprag Stiffening channel		_
	15169	A	Skid Chain Spud		3.1.33
		B/C	Adjusting Screw (for skid chain)		_
		E/N/P	Turn Buckle for Adjusting screws		_
		D	Skid Chain Link		_
		H	Link Rivet for Skid Chain		_
		F/G	Link Angles for Skid Chain		_
		K	Pan Head Rivet		_
	15170	A	Steam Brake Shaft Bracket		3.1.33
		B	Engine Suspension Bracket		_
		C/E	Engine Suspension Link bracket		_
		D	Engine Suspension link		_
	15171		Accumulator Box, rail bus		3.1.33
	15172	A/B	Drilling Template for Super r Headers		3.1.33
		C	Drilling Template for Stop Valve Header		_
	15173		Arrangement of Speedometer		4.1.33
	15174	A	Side header Ferrule		4.1.33
		B	Stop Valve Header Ferrule		_
		C	Side Header Boss		_
		D	Stop Valve Header boss		_
		E	Stop Valve Header boss		_
		F	Side Header Boss washers		_
		G	Stop Valve Header boss washer		_
		H	Stop Valve Bos adpater		_
	15175		Crankcase Pump End Back Cover		4.1.33
		C	Stoker Drive Bearing Housing		_
		D	Stoker Drive Worm Wheel		_
	15176	A	Crankcase End Cover ( mech stoker)		9.1.33
		B	Crankcase End Cover ( non mech stoker)		_
		C	Crankcase End Cover gland		_
		D	In termediate Gear Sleeve		_
		E	Stoker Drive Safety Clutch		_
	15177	A	Stoker Drive Worm, SD waggon		10.1.33
		B	Stoker Drive Spindle		_
		C/H	Screwed Plug		_
		D	Intermediate Gear Spindle		_
		E	Stop Pin		_
		F	Special Slotted nut		_
		G	Stoker Drive Spindle Dist. Piece		_
	15178	A	Boiler Stod Cover (2 - 4 1/2" blr)		17.1.33
		B	Superheater Steady Plate ( 2 -8 1/2" blr)		_
		C	Superheater Steady Plate (2 - 4 1/2" blr)		_
		D	Accelerator pedal		_
	15179	A	Arrangement of Stoking Hole Cover		30.11.32
		B	Stoking Hole Cover		_
		C	Stoking Cover baffle plate		_
		D	Stoking Cover handle pin		_
		E	Stoking Cover Handle		_
		F	Stoking Cover handle washer		_
	15180	A/B	Cab Support Channel		1.2.33
		C/D	Apron Plate Side Stanchions, SD waggon		_
	15181	A	Funnel Surround		11.2.33
		B/H	Bunker Door		_
		C/D	Bunker Door Guide Packer - RH		_
		E/F	Bunker Door Guide		_
		G	Bunker Door Guide packer - LH		_
	15182	A	Bunker Support cleat		15.2.32
		B/C	Roof Bow gusset		_
		D/L	Bunker Door Operating Lever		_
		E	Cab Back Coping		_
		F/K	Bunker Chute		_
		G/H	Cab Side Coping		_
		J	Bunker Opening Coping		_
	15183		Arrangement and Detail of Cab Back - mech stoking		9.3.33
	15183 A		Arrangement and Detail of cab - hand stoking		8.2.33
	15184		Arrangement of Bunker - Hand Stoking		10.2.33
	15185	A/B	Superheater Side Header, woolnough boiler IV
		C	Superheater Header (stop valve)		_
	15186	A	Spring Front Bracket Packing, trailer		4.1.33
		B	Spring Rear Bracket Packing		_
		C	Lubricator Mudguard		_
		D	Lubricator Bracket for Sliding pinion		_
		E	Aux. Drum Rope Securing Pin		_
		F	Spare Wheel Bolt		_
		G	Tyre Hoist Bracket		_
	15187	A	Sprag Angle		4.1.33
		B/C	Sprag Angle Gusset		_
		D	Sprag Chain Bracket		_
		E	Sprag Chain		_
		F	Sprag Angle Stiffening plate		_
		G	Winch Rope Securing pin		_
	15188	A	Collector trough Dogs
		B/C	Header Studs		_
		D	Stop Valve Header stud		_
		E	C&A Washer for Stop Valve header		_
		F	Firebar Support lever		_
		G	Cotter for Support Lever		_
		J	Mech - Stoke Name plate		_
	15189		Arrangement of Skid Chain
	15190		Arrangement of Mechanical stoker		5.1.33
	15191	A/C	Drag Link end		6.1.33
		B	Steering Drop Lever		_
	15192
	15193		Arrangement of tar Tank fitted to DG6 waggon		8.1.33
	15194	A	Brake Lever, SS waggons		7.1.33
		B	Tyre strap		_
	15195		Frame		7.1.33
	15196		Arrangement and Detail of Tyre Container		7.1.33
	15197	A	Canopy Support		9.1.33
		B	Tyre Container angle		_
	15198	A	Brake Beam Pivot Bracket, SD waggon		3.1.33
		B	Reversing Shaft Bracket		_
		C	Steam Brake Piston		_
		D	Steam Brake Piston		_
	15199
	15200		Arrangement of Cardan Shaft for Pneus Tyred waggon		19.5.30
	15201		Arrangement of Rear Mudguards		10.1.32
	15202	A	Rear Mudguard Stay		11.1.32
		B/C	Rear Mudguard Stay bracket		_
		D/E	Rear Mudguard Centre Bracket		_
		F	Rear Mudguard Centre Bracket strip		_
		G	Compressor Steady bracket		_
		H	Special Drilling in Dyn and Comp Bracket		_
		J	Thermometer Flange		_
	15203	A	Double ball Coupling Rod End, DG8		10.1.33
		B	Steering Coupling rod		_
		C	Steering Ball Socket		_
		E/H	Steering Drag Link		_
		D	Support Plate Stay		_
		F	Tailboard Extension Support socket		_
	15204	A	Ashpan Operating Gear Bracket, shaft drive waggon		10.1.33
		B/C	Bellcrank Bracket and boss		_
		D	Lever End		_
		E	Rod End		_
		F	Ratchet Pawl		_
	15205	A/L	Control Spindle		10.1.33
		B/C	Control Spindle Lever		_
		D	Gear Change Operating Lever		_
		E/F	Reversing Shaft Lever		_
		G	Gear Change Shaft Lever		_
		H/M	Hand Brake Lever		_
		J/K	Steam Brake Lever		_
	15206	A	Spare Tyre Carrying Board		9.1.33
		B	Tank Carrying Board Block		_
		C	Tank Strap		_
			Spare Tyre Clamp		_
		E/F	Spare Tyre Steady link		_
	15207	A/M	Thimble Tube Firebox, shaft drive waggon		11.1.32
		B	Thimble Tube Firebox, shaft drive waggon		_
			Thimble Tube		_
		J/L	Stoking Chute (top)		_
		K	Stoking Chute (bottom)		_
	15208	A	Lubricator Bracket, rail bus		11.1.33
		B	Lubricator Sight Feed Reflector		_
		C	Lubricator Drain Pipe		_
		D	Mechanical Stoker Cross Shaft (engine end)		_
		E	Mechanical Stoker Cross Shaft		_
		F/G	Steam Control Valve Bracket (feed pump)		_
	15209		Arrangement of Boiler		5.4.33
	15210		Lay-out of Control Rods, rail bus		11.1.33
	15211		Arrangement and Detail of Frame for DG4P 15' - 3' Flat Platform waggon		12.1.99
	15212	A/G	Front Spring Pad Cap		11.1.33
		B	Cap Dust Cover		_
		C	Locking piece		_
		E	BTH Electrical Speedometer bracket		_
		D/F	Spring Pad Bridge piece		_
	15213		Arrangement of Engine Suspension and Torque Stay		12.1.33
	15214	A	RH Front Footplate Support Bracket		13.1.32
		B	LH Front Footplate Support bracket		_
		C	Extension Outside Washer plate		_
		D	Extension Support		_
		E	Support Rubbing Plate		_
		F	Support Socket		_
		G	Extension Protection plate		_
		H	Vertical Cope bar		_
	15215	A	Arrangement of Tank End Securing Straps		2.3.33
		B	Strap Corner Plate (front)		_
		C	Strap Corner plate (rear)		_
		D	Bottom Chain bracket		_
		E	Bunker Support		_
	15216	A/H	Steam Brake Lever 0 outer		12.1.33
		D	Compensating Link Guide, CANCELLED - never used		_
		B/C/K	Hand Brake beam		_
		F/J	Steam Brake Conn Rod		_
		G	Steam Brake Conn. Rod End		_
	15217		Water Tank 330 gall cpy		13.1.33
	15218	A/B	Operating lever and Lug		13.1.33
		C	Ashpan Lifting Quadrant		_
		D	Bellcrank		_
		E	Stop Valve Packing Wedge		_
		F	Tank Manhole Door		_
		G	Shut - off Valve Handle		_
		H	Stoking Chute Withdrawing pin		_
	15219		Arrangement of DG4 Waggon fitted with 1000 gallon Tar Tank and Apraying apparatus		6.1.33
	15220		Arrangement of Tar Spraying gear		13.1.33
	15221
	15222	A	Control Column		13.1.33
		B	Side Door for Control Column		_
		C	Rear Door for Control Column		_
		D	Control Support plate		_
	15223	A	Hand Brake Shaft Bracket		13.1.33
		B/F	Reversing Shaft Bracket bush		_
		C	Steam Brake Shaft Bracket bush		_
		D	Steam Brake Shaft		_
		E	Reversing Lever spindle		_
	15224	A/B	Life Guard, rail bus		19.1.33
		C	Support Bracket (steam brake controls)		_
		D/E	Bracket (steam brake gear)		_
		F	Sector plates (steam brake gear)		_
		G/H	Footstep (bogie)		_
		J	Throttle Drifting Nameplate		_
	15225	A/B	Spare Wheel Vertical Support		16.1.33
		C	Vertical Support Gusset		_
		D	Spare Wheel Horizontial Support		_
		E/F	Tyre Carrier Support		_
		G	Tyre Carrier Support Stiffener		_
	15226		Alteration to Special Body and Canopy Back also Drilling in Frame for Tyre carrier, conversion SS 13" - 6" platform		16.1.33
	15227	A	Stoking Chute		14.4.32
		B/C	Stoking chute		_
	15228		Arrangement of Trailer with 2,900 gallon oil tank		16.1.33
	15229		Feed Heater body		16.1.32
	15230	A	Brake Cylinder Dust Shield, CANCELLED - never used 21.2.33		16.1.33
		B	Brake Cylinder Dust Shield, CANCELLED - never used 21.2.33		_
		C	Brake Cylinder Cover		_
		D	Brake Cylinder Cover		_
		E	Brake beam Guide		_
		F	Steam Brake Wrist Pin		_
		G	Steam Brake Wrist pin		_
	15231		Arrangement of Spare Tyre Carrier with Mod Required to frame, cab and rear cover		16.1.33
	15232
	15233	A	Throttle Hand lever (boiler end)		18.1.32
		B	Trigger Knob		_
		C	Throttle Handle Trigger		_
		D	Throttle Handle Trigger		_
	15234	A	Tipping Cylinder, SD waggon		20.1.33
		B	Tipping Cylinder Bottom cover		_
			Piston Rod bearing (bottom half )		_
		D	Piston Rod bearing (top half )		_
	15235	A	Control Support Bar, railbus
		B	Control Support Bracket		_
		C	Control Column angle		_
		D	Rev. Gear Box Hanger (front)		_
		E	Rev. Gear Box Hanger Rear		_
	15236	A	Arrangement of Lubricator Suspension, super sentinel (conversion) - never used		17.1.33
		B	Oil Pump Bracket Tie bar		_
		C	Oil Pump Bracket		_
		D	Rear Bogie Stop		_
		E	Bogie Stop buffer		_
	15237		Spider for tractor spuds		18.1.33
	15238		Sao Paulo (arazician railway co. Ltd) Chain Drive conversion to 3 pitch chains		18.1.33
	15239		Cab, Canopy and Bunker		18.1.33
	15240	A	Piston Rod		18.1.33
		B	Piston		_
		C/D	Cylinder Front Cover		_
		E	Piston Rod Nut		_
	15241		Front and Rear Footplate		18.1.33
	15242	A	Tractor Stud, tractor		19.1.33
		B	Pivot Pin for Spud		_
		C	Spring for tractor Spud		_
	15243	A	Tank Strap		19.1.33
		B	Footplate Support		_
		C/D	Tank Support Block angle		_
		E/F	Tank Supporting block		_
		G/H	Front Draw Bar Bracket Channel		_
	15244	A	Quadrant Bracket		18.1.32
		B	Handle Locating Spring Cab		_
		C	Throttle Quadrant		_
		D	Throttle Control rod		_
		E	Hand lever Fulcrum Pin (throttle)		_
		F	Throttle Lever Fulcrum pin		_
		G	Throttle Bellcrank		_
	15245	A	Arrangement of headboard to suit Standard body		19.1.33
		B	Headboard Inside Centre Cope bar		_
		C	Headboard Outside Centre Cope bar		_
		D	Headboard Inside Side Cope bar		_
		E	Headboard Cope bar		_
		F/G	Headboard Support		_
			Headboard stay		_
	15246
	15247		General Arrangement of DG6 T
	15248		General Arrangement of DG8 T
	15249	A	Flywheel - spec conversion		19.1.33
		B	Conveyor Pullet		_