Drawing No				Description		Date
	14000	A	Dynamo, Compressor and Mechanical Stoker Drive casing		14.1.32
		B	Worm		_
		C	Worm Wheel		_
	14001	A	Camshaft Oil Tray (control box end), geared car		22.1.32
		B	Camshaft Oil Tray (control box end), geared car		_
		C	Oil Filler Cap and Snifter body		_
		D	Gear Box Oil Filler and cover		_
		E	Oil Filler Locking clip		_
		F	Oil Filler Locking clip		_
	14002		Rear Top Mudguard for 6 wheel tipping waggon on pneumatics		23.1.32
	14003		Sentinel Patent Water Tube Boiler		26.1.32
	14004	A	Coal Bunker Lid		25.1.31
		B	Coal Bunker Cover and Chute		_
		C	Bunker Support Tube		_
		D	Bunker Support Bracket		_
		E	Bunker Support plate		_
		F	Bunker Support angle		_
	14005	A	Chain Guard Support no. 2		26.1.32
		B/C	Chain Guard Support no. 1		_
		D	Chain Guard Support no. 3		_
		E	Chain Guard Support no. 4		_
		G/H	Chain Guard		_
		J	Rear Mudguard Support Washer plate		_
		K/L	Rear Mudguard Packing block		_
	14006	A	Chain Pinion Centre		28.1.32
		B	Chain Pinion 2" pitch		_
		C	19 - T Chain Pinion 2" pitch		_
	14007	A	Arrangement of Headboard fitted to 19'-0' platform with 24" hinged sides		27.1.32
		B	Headboard Knee		_
		C/D	Headboard Support nagle		_
		E	Front Catch Brcaket		_
		F	Headboard Knee Cope bar		_
		G	Headboard Outside Cope bar		_
		H	Headboard Stay		_
	14008	A	Brake Drum and Chain Wheel		12.8.32
		B/C	Rear Spring Bracket		_
		D	Frame Stiffener		_
		E/G/H	Rear Wheel Bush		_
		F	Gearcase Cover		_
	14009	A	Oil Pump Body		27.1.32
		B	Oil Pump Bend		_
		C	Oil Pump Cap		_
		D	Madnetic Separator Car, six cylinder engine		_
		E	Magnet Rod		_
	14010		Arrangement of Oil Pump and Relief Valve, six cylinder engine		27.1.32
	14011	A/B	Front, 2nd and 3rd Platform Support Channel Bracing		29.1.32
		C/D	4th and 6th Platform Support Channel Bracing		_
		E/F	5th Platform Channel Bracing		_
		J/K	Rear Platform Support Channel Bracing		_
		G/H	7th Platform Support Channel Bracing		_
		L	Tank Strap Suspension cleat		_
		M	Frame cross Stay Tie		_
		P/N	Engine Suspension Channel Bracing		_
	14012	A	Bunker Support		28.1.31
		B	Bunker Bottom Angle		_
		C	Bunker Side angle		_
		D/E	Control Valve Clutch fork		_
		F	Driving Shaft Bracket stay		_
		G	Driving Shaft Bearing Bracket		_
	14013	A	Engine Sprocket Splash Guard RH, DG waggons		28.1.32
		B	Engine Sprocket Splash Guard LH, DG waggons		_
	14014		Arrangement of Driving Wheels and Axle		10.2.32
	14015		Arrangement of Driving Wheels and Axle		10.2.32
	14016	A	Dynamo Spur Wheel		29.1.32
		B	Compressor Spur Wheel		_
		C	Compressor Spur Pinion		_
		D	Connecting Rod End		_
		E	Driving Shaft Bush		_
		F	Clutch Thrust Washer		_
	14017	A/B	Rear Axle Spring 8ton		25.5.33
		C/D	Rear Axle Spring - 10 ton		_
		E	Spring		_
	14018	A	Arrangement of Winch Engine Lubricator drive		4.2.32
		B	Arrangement of Main Engine Lubricator drive		_
		C	Lubricator Bracket		_
		D	Lubricator Bracket		_
		E/G	Crankshaft Nut		_
		F	Feed Pump Ram Plug		_
	14019		Rear Axle		2.2.32
	14020	A/B	Tailboard Hinge bracket		4.2.32
		C	Side Hinge Bracket		_
		D	Tailboard Hinge (bottom)		_
		E	Body Side Hinge		_
	14021	A	Magnetic Seperator Body, six cylinder engine		3.2.32
		B	Magnetic Seperator Valve, six cylinder engine		_
		D	Arrangement of Magnetic Seperator, six cylinder engine		_
	14022	A	Assembly of tank Level Gauge Priming valve		3.2.32
		B	Valve body		_
		C	Valve cap NOT USED		_
		D	Valve Washer NOT USED		_
		E	3/8" Gas Coupling nut		_
		F	5/16" Coupling Collar		_
		G	Washer for 3/8" gas coupling nut		_
	14023		Rear Bogie Axle Loader Cylinder		3.2.32
	14024		Arrangement of Front Mudguards, super sentinel on pneumatic tyres		3.2.32
	14025
	14026	A/B	20" Dia Newlay Solid Wheel, Solid Tyre and retaining		4.2.32
		C	20" Dia Newlay Solid tyre		_
	14027	A	Tailboard Hinge (top)		15.2.32
		B	Tailboard Protection Plate (top)		_
		C	Tailboard Protection plate (bottom)		_
		D	tailboard Hinge Pin (top)		_
		E	Side Protection plate (rear)		_
		F	Side protection Plate (centre)		_
		G	Side protection plate (front)		_
		H	Headboard Protection plate		_
	14028
	14029	A	Cylinder Cover		5.2.32
		B	Rope Pulley		_
		C	Pulley Shaft		_
		D	Compensating Beam		_
		E	Piston Rod		_
		F	Cylinder Support Bracket		_
		G	Rear Axle Strap		_
	14030		Arrangement of Rear Axle Loader		5.2.32
	14031		Arrangement of Reduction Gear for Locomotive, industrial type
	14032		Arrangement of Cab Canopy and Bunker for DG4, DG4T, DG6 and DG6T		15.3.32
	14033	A	Delivery Pipe (oil pump to filter), six cylinder engine		6.2.32
			Return Pipe ( crankcase to oil pump)		_
	14034
	14035	A/R	Brake rear Rod		24.2.32
			Hand Brake Pull Rod		_
		C/D	Cross Support Cleat		_
			Hand Brake Forward Rod		_
		F	Forward Rod Fork End		_
		G/L	Steam Brake Tie Bar		_
	14036	A	Arrangement of Rear Mudguards and Supports for Special DG6P waggon		8.2.32
		B	Rear Mudguard Stay		_
		C	Rear Mudguard Stay Stiffening plate		_
		D	Rear Mudguard Stay Support angle		_
		E	Rear Mudguard Stay Washer plate		_
	14037	A/B	Side Stanchion Support channel		16.2.32
		C/L	Rear Catch Bracket		_
		D/E	Body Side Stanchion (centre)		_
		F/G	Headboard Stanchion		_
		H	Headboard Stanchion Cleat		_
		J	Headboard Stanchion bracket		_
		K	Headboard Support clip		_
	14038	A	Trailer Axle Packing piece, trailer		10.2.32
			Spring Bracket Packing piece		_
			Drawbar End		_
			Drawbar End		_
		F/G	Spring Tie Bar		_
		K/N	Hand Brake Rod End		_
			Spring Bracket Pacing piece		_
	14039	A	Cylinder Drain Nipple		11.2.32
		B	Cylinder Drain Cover		_
		C	Fishtail (ends)		_
		D	Snifter valve		_
		E	Snifter Pipe		_
		F	Special Cylinder drain Nipple		_
			Double Fishtail		_
	14040	A	Spart Top Baffle Plate		12.2.32
		B	Spark Centre Baffle Plate		_
		C	Spark Bottom Baffle plate		_
		D	Spark Centre Baffle plate		_
		E	Spark Bottom Baffle Plate		_
		F	Joint ring		_
		G	Spark Arrester Vane bolt		_
			Arrester Joint		_
	14041
	14042		Arrangement of Power Unit Drive		15.2.32
	14043		Arrangement of Engine and Jackshaft Drive for 2 1/4 pitch chains		11.2.32
	14044	A	23 T Jackshaft Sprocket (double)		15.2.32
		B	23 T Jackshaft Sprocket (single)		_
		C	Engine Sprocket Centre		_
			Axle Sprocket Bolt		_
	14045	A	Headboard Cope bar		19.2.32
		B	Headboard Squeegee Cope Bar		_
		C	Headboard Protection Bar		_
		D	Floor Ledge Cope Bar		_
		E	Panel Knee		_
		F/G	Guard Rail Bracket		_
			Guard Rail Bracket stay		_
	14046	A	Front Axle Packing Piece		16.2.32
		B	Front and Rear Axle Packing piece		_
		C	Brake Drum and Chain Wheel		_
	14047	A	Arrangement of Studing Top		16.2.32
		B	Arrangement of Studing Bottom		_
	14048		200HP Oil Fired Boiler, railcar		16.2.32
	14049	A/B	Drain Cock (arrgt)		18.2.32
		C/D	Drain Cock Body		_
		E	Drain Cock Plug		_
		F	Drain Cock Plug washer		_
		G	Footbrake Shaft Support Bracket		_
		H	Locking Plate		_
		J	Tie bar Rod		_
	14050		Arrangement and detail of Frame for Super Sentinel End Tipper on pneu tyres		19.2.32
	14051		Arrangement of Frame for 15'-3' platform (without tyre container cab)		18.2.32
	14052		Geared Car Oil Fired Boiler		18.2.32
	14053		Rear Bogie Suspension bracket, Sd 6 Tip and flat		18.2.32
	14054		Special DG6 Body		2.9.32
	14055		Arrangement of Spark Arrester, DG waggon		18.2.32
	14056		Arrangement of Spark Arrester		20.2.32
	14057		Proposed Arrangement of Special DG6 Side Tipper		18.2.32
	14058		Proposed Arrangement of Water and Oil Fuel Tanks for 100 HP Roumanian Cars		9.2.32
	14059
	14060	A	Exhaust pipe, rail car 6 cylinder engine		19.2.32
		B	Exhaust Pipe and Bend		_
	14061	A	Suspension bracket cap		19.3.32
		B	Roller Bearing Housing		_
		C	Torque Bracket		_
		D	Diff Bearing cap		_
	14062	A/D	Tank Strap and Cab Bolts Cleats		22.2.32
		B/C	Tank Strap and Body Bolt Cleat		_
		E	Arrangement of Tyre carrier and rear Mudguard		_
		F	Tyre carrier Frame		_
			Tyre Carrier stay		_
		J	Rear Mudguard Front Support		_
		K	Detail of Drilling in Tipping Platform Front Cross Channel for body Fixing bracket		_
	14063		Development of boiler Shell shewing position of mountings		22.1.32
	14064		Special Grain carrying Bogie, super end tipper		22.2.32
	14065		Details of Drilling in Frame for moving floor platform		22.2.32
	14066	A	Arrangement of Tool Box and Front Number plate, DG tractor		23.2.32
		B	Toolbox Wrapper		_
		C/D	Tool Box End		_
		E	Toolbox Lid		_
		F	Tool Box Catch Bar		_
		G	Steam Brake Cylinder bracket		_
		H/J	Brake Beam Guide bracket		_
	14067		Arrangement Steam Drying coil		21.3.32
	14068		Collector Pipe		4.3.32
	14069		Rear Bogie Spring Bracket, SD6		22.2.32
	14070	A	Steam Valve, six cylinder railcar engine		23.2.32
		B	Exhaust Valve		_
		C	Exhaust Valve Cap		_
		D	Camshaft Key		_
		E	Cam Follower Guide		_
		F	Exhaust Valve		_
	14071	A	Platform Side Bulb Angle Cut Away		23.2.32
		B	Fixed Side Support		_
		C	Vertical Cope Bar		_
		D	Drilling in Platform Rear Cross channel		_
		E	Tailboard Hinge		_
		F	Tailboard Hinge		_
	14072	A	Compensating Link (top)		22.2.32
		B	Compensating Link (bottom)		_
		C	Link Pin		_
		D	Brake Support Channel cleat		_
		E/F	Brake rear Support angle		_
	14073	A	Front Boiler Support (bottom)		24.2.32
		B	Front Boiler Support (top)		_
		C	Rear Boiler Support		_
	14074	A/B	Steam Brake Support Channel, sentinel pneu tyred waggon		17.2.32
		C	Compensating Link Guide plate		_
		D	Forward Rod End		_
		E/F	Brake Gear Front Cross support		_
	14075		Arrangement of Superheater Coils, 100HP Railcar boiler 13046		24.2.32
	14076		Superheater Coil - Inner, 100 HP Railcar boiler 13046		25.2.32
	14077		Superheater Coil - Outer, 100HP railcar boiler 13046		25.2.32
	14078	A/E	Exhaust Pipe Flange, railcar six cylinder engine		25.3.32
		B	Steam Pipe Bend		_
		C	Steam Pipe (middle section)		_
		D	Steam Pipe (end section)		_
	14079
	14080	A	Superheater packing piece		26.2.32
		B	Superheater Top Dog, CANCELLED		_
		C	Superheater Bottom Dog		_
		D	Superheater Dog		_
		E	Steam Flange, CANCELLED 1.3.32		_
		F	Superheater Baffle Plate Bolt		_
	14081	A/B	Platform Rear Corner Angle R and LH, super end tipping waggon		25.2.32
		C/D	Platform Front Corner angle R and LH		_
		E	Side Corner angle		_
		F	Side Corner Angle Backing strip		_
		G/H	Headboard Corner Angle R and LH		_
		J/K	Tailboard Back Plate R and LH		_
		L/M	Tailboard End protection Plate R and LH		_
		N/P	Tailboard End protection Plate R and LH		_
	14082	A/J	Steam Brake Rod - rear end		26.2.32
		B/K	Steam Brake Rod - forward end		_
		C/D	Handbrake Weighshaft Bracket packer		_
		E	Steam Brake Beam Swing Link		_
		F	Welding Boss for Steam Brake Beam Swing Link bracket		_
		G	Engine Suspension Channel		_
			Arrangement of Engine Suspension		_
	14083		Arrangement of Frame for 14"-3" Platform with tyre Container cab		23.12.32
	14084	A	Bottom Joint 200HP Oil Burning Boiler, railcar		27.2.32
		B	Bottom Joint 100HP Oil Burning Boiler, railcar		_
		C	Top Joint 100HP Oil Burning Boiler		_
		D	Boiler Top Joint (boiler drg no. 18346)		_
		E	Boiler Bottom Joint (boiler drg no. 18346)		_
	14085		Boiler Studs		27.2.32
			Studs		_
		T	Support Stud		_
		Z	Stud		_
			Studs		_
			Special Bolts		_
	14086	A	Steam Pipe Packing Adjuster		26.2.32
		B	Oil Filler Hole Cover		_
		C	Steam Pipe Gland Ring		_
		D	Bell Crank Lever		_
		E	Three Way Piece		_
		F	Injector Handle		_
	14087	A/B/C/G	Ashpan, Dg waggons - mechl stoker		27.2.32
			Ashpan hinge		_
		F	Ashpan Hook		_
	14088	A	Inner Funnel Extension		1.3.32
		B	Inner Funnel Extension		_
		C	Altern to Damper Top and Bottom Bosses		_
		D	Body Side Support knee		_
		E/F	Body Side Support Knee R and LH		_
		G/H	Side protection Plate (rear)		_
	14089	A	Blast Pipe Reducing piece		27.2.32
		B	Torque Stay Link		_
		C	Arrangement of Continuous Blow Down valve		_
	14090		Plain Boiler Tubes, railcars		29.2.32
		M	Plain Boiler Tubes, railcars		_
			Boiler Stay Tubes		_
		R	Boiler Stay Tubes		_
		AA	Plain Boiler Tubes, railbus		_
		FF	Plain Boiler Tubes, railbus		_
		EE	Boiler Stay Tube		_
		GG	Boiler Stay Tube		_
	14091		Arrangement of Brake gear for Super End Tipper on Pneu tyres
	14092		Joint		22.12.33
			Exhaust Pipe Joint washer		_
			Joint		_
		G	Uptake Drum Handhole Door Joint		_
			Joint		_
			Joint		_
			Joint for Square Flange		_
			Washer		_
	14093	A	Bottom Tailboard Catch Plate		29.2.32
		B	Bottom Tailboard Catch		_
		C	Top Tailboard Catch		_
		D/E	Top Tailboard Catch Plate R and LH		_
		F	Top Tailboard Catch Plate Bolt		_
		G	Tailboard Catch Plate		_
		H	Cross Chain Hook		_
		J	Tailboard Roller		_
	14094		Proposed Arrangement of Water Tank and Fillers, geared car		2.5.32
	14095	A/B	Guard Rail Bracket (rear)		29.2.32
		C/D	Guard Rail Bracket(centre)		_
		E	Guard Rail Bracket (front RH)		_
		F	Guard Rail Bracket (front LH)		_
		G/L	Guard Rail Bracket Stay (rear)		_
		H/M	Guard Rail Bracket Stay (front)		_
		K	Drilling for Guard rail Brackets		_
	14096		Front Wheel Hub, SD		1.3.32
	14097	A	Combustion Chamber Centre Tube		1.3.32
		B	Combustion Chamber Top		_
		C	Baffle Plate Bracket, railcar		_
		D	Collector Pipe Hook Bolt		_
		E	Superheater Baffle Plate Bolt		_
	14098		Arrangement of Spark Arrester, old supers		2.3.32
	14099
	14100	A	Rear Axle		1.3.32
		B	Arrangement of Trailer Pivot		_
		C	Trailer Pivot Washer		_
			Pin		_
		E	Clip		_
	14101	A	Floor Corner angle		2.3.32
		B	Tailboard Cope iron		_
		C	Tarpaulin Rail Support		_
		D	Tarpaulin Rail Locating peg		_
		E/F	Body Side Top Rail R and LH		_
		G	Top Rail Angle Barcket		_
		J	Tailboard Hinge bar		_
	14102	A	Tarpaulin Rail		3.3.32
		B/C	Tarpaulin Rail Binding Plate		_
		D	tailboard Stop plate		_
		E	Headboard Cope bar (outside)		_
		F	Headboard Bottom angle		_
		G	Headboard Cope bar (inside)		_
		H	Body Side Cope bar		_
	14103		Spring pad		3.3.32
	14104		Drilling in Cross Members for Control Rods		3.3.32
	14105
	14106		Crankcase
	14107	A	Rear Axle Bearing cover		3.3.32
		B	Spring Pad		_
		C	Spring Clamp		_
	14108		Exhaust Camshaft, 6x7" - 6 cylinder engine		3.3.32
	14109	A	Thrust Bearg housing		1.3.32
		B	Bearing Housing Gland		_
		C	Driving Shaft End Cover		_
		D	Layshaft End Cover		_
	14110		DG6T on pneumatics		4.3.32
	14110 2nd		DG6T on Pneumatics		4.3.32
	14110 3rd		DG6T on Pneumatics		4.3.32
	14111		DG6 on Pneumatics		4.3.32
	14111 2nd		DG6 on Pneumatics		4.3.32
	14112		DG4 on Pneumatics		4.3.32
	14112 2nd		DG4 on Pneumatics		4.3.32
	14113		Arrangement of Control Rods in Underframe, 100HP Oil Fired rail car		2.3.32
	14114		Uptake for Type 4 Woolnough Boiler		4.3.32
	14115		Drilling in cross bars for control rods		5.3.32
	14116		Arrangement of Control Rods in Underframe, LNER 200HP railcar		18.3.32
	14117	A	Guide Block, railcar LNE Rly 200HP		30.3.32
		B	Guide Block, railcar		_
		C	Guide Block		_
		D	Guide Block		_
		E	Guide Block		_
		F/J	Guide Block		_
		G	Guide Block		_
		H	Guide Block		_
	14118		Footplate, sentinel pneu tyred waggon		7.3.32
	14119		Arrangement of Sanding gear		7.3.32
	14120	A	Eng Suspension Channel, CANCELLED 8.4.32		7.3.32
		B	Eng Suspension Channel, CANCELLED 8.4.32		_
		C/G/H	Pipe Support stay		_
		E/F/J	Frame Cross Stay		_
		D	Brake gear Support angle		_
	14121	A	Rear Axle Layshaft Pinion, SD		7.3.32
		B	Torque Rod Ball-casing		_
		C	Driving Shaft-front		_
		D	Driving Shaft-rear		_
	14122		Arrangement of Driving Wheels and Axle		18.3.32
	14123	A	Stoker Driving Shaft, DG waggon - mech stoker		18.2.32
		B	Driving Shaft Clutch spindle		_
		C	Driving Shaft Clutch		_
		D	Driving Shaft Lever		_
		E	Driving Shaft Lever Boss		_
		F	Driving Shaft Clutch Shield		_
	14124	A	Conn Rod End Cap		20.2.32
		B	Connecting Rod Collar		_
		C/D	Clutch Connecting Rod End		_
		E	Clutch Connecting Rod		_
		F	Connecting Rod		_
		G	Driving Shaft Clutch Fork		_
	14125	A	Stoker Ratchet Wheel, DG waggon - mech stoker		23.2.32
		B/C	Ratchet Operating lever		_
		D	Clutch Fork Block		_
		E	Stoker Pawl		_
		F	Firegrate Driving Sprocket		_
		G	Driven Sprocket centre		_
	14126	A	Adjusting Plate bearing		2.3.32
		B	Driving Sprocket centre		_
		C	Ratchet Gear Case Stay		_
		D	Firegrate Driving shaft		_
		E	Connecting Rod End Cover		_
			Driving Shaft Barcket Stay Flange-bottom, CANCELLED 5.3.32		_
	14127	A	Adjusting Plate Cross Shaft		3.3.32
		B	Quadrant Plate		_
		C	Quadrant		_
		D	Operating Rod		_
		E	Connecting Link		_
		F/G	Cab Holding Down angle		_
	14128	A	Driving Shaft Clutch Fork pin		7.3.32
		B/C	Clutch Fork Stud		_
		D	Control Lever Pin		_
		E	Conveyor Spindle Plug		_
		F	Conveyor Spindle Nut		_
		G	Clutch Spindle Nut		_
		H	Chain Sprocket Bolt		_
		J	Driving Lever Shearing Bolt		_
	14129		Arrangement of Driving Wheels and Axle		13.3.32
	14130		Steam Camshaft, 6"x7" - 6 cylinder engine		8.3.32
	14131		Filler Stiffening ? ?
	14132	A	Body Holding Down Cleat (rear)		8.3.32
		B	Body Holding Down Cleat (front)		_
		C	Tailboard Hinge		_
		D/E	Body Side Front and Tailboard prot" plates		_
		F	Body Side Rear Protection plate		_
		G	Front Catch Plate		_
		H/J	Front Corner plate, DG4P		_
	14133	A	R.Axle Bearing sleeve		8.3.32
		B	R.Axle Bearing housing		_
		C	R.Axle Bearing Collar		_
		D	R.Axle Pivot Pin sleeve		_
		E	Rear Axle Pivot pin		_
	14134		Arrangement and Deatil of 14"-5" Flat platform		11.3.32
	14135	A/B	Platform Side Coping		9.3.32
		C	Platform Rear Coping		_
		D/E	Platform Side angle		_
		F/G	Platform Rear Corner Plate		_
		H/J	Platform Front Corner plate		_
	14136	A/B/C/D	Platform Rear Intermeidate stays		11.3.32
		E/F	Platform Front Stay		_
		G	Platform Holding down bracket		_
		H	Lashing Ring and Eye bolt		_
		J	Washer Plate for Front Lashing rings		_
		K	Rear Washer Plate for Rear Lashing rings		_
		L/M	Rear Mudguard Support (front half)		_
		N/P	Rear Mudguard Stay (front half)		_
	14137
	14138	A	Pivot Pin Bush		8.3.32
		B	Suspension Bracket cover		_
		C	Spring Shackle Pin		_
		D	Axle casing Top Cover		_
			Locking Washer		_
		G	Intermediate Gear pin		_
	14139		Oil Tank, 100HP Oil fired railcar		9.3.32
	14140		Combustion Chamber, 200HP Oil Fired Boiler, geared car		30.9.32
	14141	A	Rear Catch Bracket		9.3.32
		B/C	Tailboard Protection Plate (top)		_
		D/E	Tailboard Protection Plate (bottom)		_
		F	Tailboard Hinge		_
		G	Tailboard Washer plate		_
		H	Tailboard Stay Bracket		_
		J	Tailboard Stay		_
		K	Tailboard Centre Washer plate		_
	14142	A	Main Bearing Cover GB End		10.3.32
		B	Crankcase Oil Sump		_
	14143	A/B	Rear Corner plate, DG6P		11.3.32
		C/G	Side rail Stiffening angle		_
		D	Body Side Stanchion, DG6P, CANCELLED, never used		_
		E	Hinge Cope bar, DG4P, CANCELLED, never used		_
		F	End Cross Bearer Gusset, DG4P		_
		H	Tailboard protection plate		_
		J	Piston Rod Gland bush		_
	14144	A	Hand rail Bracket, DG4P		10.3.32
		B/H	Hand rail		_
		C/D	Guard Rail Bracket Stay (front)		_
		E	Extra Drilling in Frame drg no. 14050		_
		F	Guard Rail		_
		G	Arrangement of guard Rail		_
	14145	A	Combustion Chamber Btm Angle ring, railcar		11.3.32
		B	Combustion Chamber Top Angle ring, railcar		_
		C	Lighting and Sighting Tube		_
		G	Combustion Chamber Bottom angle ring		_
	14146	A	Alteration to Tariler Frame and turntable		10.3.32
		B/H	Brake Rope Guide Tube, trailer		_
		C	Brake Rope Guide Tube, trailer		_
		D	Packing Piece		_
		E	Packing Piece		_
		F	Brake Rope Pulley bracket		_
		G	Brake Rope Guide block		_
	14147	A	Tank protection plate		14.3.32
		B	Headboard Squeegee plate		_
		C	Squeegee Plate angle		_
		D	Squeegee Plate Cope bar		_
	14148	A	Exhaust Valve Cap Stamping		12.3.32
		B	Exhaust Valve Cap Stamping		_
		C	Exhaust Valve Cap Stamping		_
		D	Steam Valve Cap Stamping		_
	14149		Development of Boiler Shell Boiler Drg no. 14052		14.3.32
	14150	A	Packing Adjuster Spring		14.3.32
		B	Stoker pawl Spring		_
		C	Release Valve Spring		_
		D	Stoker Drive Safety Clutch Spring		_
		E	Relief valve Spring		_
		F	Steering Gear Casing Gland spring		_
		G	Sluice Valve Spring		_
		H	Relief valve Spring		_
	14151		Geared Car Boiler Mark III		14.3.32
	14152		Drilling in cross members for Control Rods		15.3.32
	14153		Drilling in Cross Member for Control Rods, railcar		15.3.32
	14154		Collector Pipes for 200HP Oil Burning railcar boiler		14.3.32
	14155	A	Alteration to Platform		14.3.32
		B	Front Mudguard Rear and Centre Support, tipping trailer		_
		C/D	Rear Mudguard Support bracket		_
		E	Rear Mudguard Support, tipping trailer		_
		F	Trailer Rear Mudguard Centre bracket		_
		G	Front Mudguard LH Rear Support bracket		_
	14156		Arrangement of DG4P fitted with Side Tipping Trucks		14.3.32
	14157		Development of Boiler Shell boiler drg no. 14048, 200HP oil fired rail car		15.3.32
	14158
	14159	A	Guard Rail Bracket (rear)		16.3.32
		B	Guard Rail Bracket (centre)		_
		C/D	Guard Rail Bracket (front)		_
		E/F	Guard Rail Bracket cleat		_
		G/H	Guard Rail Bracket stay (rear)		_
		J/K	Guard Rail Bracket Stay (centre)		_
	14160	A	Front Spring Front Bracket		15.3.32
		B	Front Spring Rear Bracket		_
	14161		Arrangement and details of Special 14-3 x 7 0 34/ body with 22 1/2 hinged sides and tailboard		16.3.32
	14162	A	Engine Suspension Bracket SD		16.3.32
		B	Aux Drive Inter Spur		_
		C	Torque Tube Bracket LH		_
		D	Torque Tube Bracket RH		_
	14163		Water Tank, DG4 and 6 waggons		17.3.32
	14164	A/B	Tank Front Stiffening angle		17.3.32
		C/D	Tank Rear Stiffening angle		_
		E	Tank Centre Stiffening angle (front)		_
		F	Tank Centre Stiffening angle (rear)		_
		G	Tank Doubling plate		_
		H	Tank Centre Doubling plate		_
		J	Tank Wash plate		_
			Chain Lubricator pipe		_
	14165		Collector Pipe, railcar 100HP oil fired		16.3.32
	14166	A/B	Tank carrying Block		17.3.32
		C	Tank Wood packing		_
		D	Oil Tank carrying block		_
		E	Oil Tank support Bracket packing		_
		F	Oil Tank support Bracket packing		_
		G	Oil Tank Bracket support		_
		H	Oil Tank Strap		_
		J	Water Tank Strap		_
	14167	A	Arrangement of Dynamo and Air Compressor drive		17.3.32
		B/C	Rear Mudguards		_
		D/E	Rear Mudguard Stay		_
	14168	A	Rope Pulley		17.3.32
		B	Rope Pulley shaft		_
		C	Rope Pulley Cover		_
		D	Wheel Cap		_
		E	Arrangement of Rope Pulley Bearing		_
	14169		Feedwater Baffle Plate		18.3.32
	14170	A/D/L	Drawbar, trailer		18.3.32
		B/J/G/E/H/M	Drawbar Angle Stiffener		_
	14171	A	Water Tank Sump		18.3.32
			Tank Sump Strainer		_
	14172		Arrangement and Detail of Frame for Super Sentinel 3 way tipper on pneu tyres		18.2.32
	14173		Boiler Top plate		18.3.32
	14174		Arrangement of Footplate, railcar (oil fired)		21.3.32
	14175		Plan View shewing Drilling in Footplate at Articulated Ends of Frames		19.3.32
	14176	A	Arrangement and details of Headboard, special DG4T		19.3.32
		B/C	Platform Rear Corner angle		_
		D/E	Platform Front Corner angle		_
		F	Bodyside Extension socket		_
		F	Packer for Body Cross cahin hook, CANCELLED, never used 22.3.32		_
	14177	A	Steam Drying Coil		22.3.32
		B	Reducing Valve flange		_
	14178	A	Alterations to Frame drg no 5003		21.3.32
		B	Tipping Cylinder Support Channel (front)		_
		C/D	Tipping Cylinder Support Channel cleat		_
		E/J/F/K	Arrangement and Deatil of Rear Mudguard (rear half)		_
		G/L/H/M	Arrangement and Deatil of Rear Mudguard (front half)		_
	14179	A	Bellcrank Lever Bracket		21.3.32
		B	Control Gear Bracket (long)		_
		C	Control Gear Bracket (short)		_
	14180		Arrangement and Detail of Frame for DG4P 15'-3' flat platform waggon		22.3.32
	14181		Arrangement and Deatil of frame with 19'-0' platform and tyre container cab		21.2.32
	14182		Boiler, rail motor bus		11.7.32
	14183	A-E	Continuous Blow-down nozzle, geared car		2.4.32
		F	Nozzle Body		_
		G	Body Plug		_
		H	Special Nipple		_
	14184		Arrangement of Oil Fuel Gear, geared car		28.6.32
	14185		Water Tank Filler RH		23.3.32
	14186		Water Tank Filler LH		24.3.32
	14187	A/E	Tyre Carrier		22.3.32
		C	Mudguard and Guard Rail Support RH		_
		D	Mudguard and Guard Rail Support LH		_
		B	Brake relieving Spring Bracket		_
		F	Footstep Bracket		_
		G	Footstep Bracket stay		_
	14188		Arrangement of Oil Filler, geared car		21.4.32
	14189		Boiler Top Cover, 200HP Boiler Rail car
	14190		Arrangement of Control gear at Articulated End		23.3.32
	14191		Funnel Outer Casing, railcar 100HP oil fired		23.3.32
	14192		Arrangement of Boiler Top and Funnel		23.3.32
	14193		Control Gear Bracket shaft		24.3.32
		C	Bellcrank Thrust washer		_
		D	Bellcrank Bush		_
		E	Bellcrank Lever pin		_
			Pull Rod		_
	14194	A	Roller		24.3.32
		B	Roller bracket		_
		C	Roller Spindle		_
		D	Tank Suction Pipe Socket		_
		E	Suction Pipe		_
		F	Suction Pipe		_
	14195
	14196	A	Tyre Carrier Frame, pneutyred super 3-way tip		29.3.32
		B/C	Rear Mudguard Support (rear half)		_
		D/E/J	Tyre Carrier Stay		_
		F/G	rear Mudguard Support (front half)		_
		H	Tipping Cylinder Support Channel rocking		_
		K/L	Rear Mudguard Support (rear half)		_
		M/N/Q/P	Rear Mudguards		_
	14197		Tank Filling Drum		30.3.32
	14198		Water Tank		5.4.32
	14199	A	Arrangement of Headboard		30.3.32
		B	Headboard Knee		_
		C	Headboard Knee angle		_
		D	Body Bearer Cut Away to Clear Brake gear		_
		E	Arrangement of 22 3/4" heasdboard		_
	14200		Throttle and Reversing Gear Control, railcar		31.3.32
			Throttle Control Rod		_
	14201		Generating Tubes and Watertube Boiler		31.3.32
	14202	A/F	Reversing Bellcrank Lever, geared car		31.3.32
		B	Reversing Screw Lever		_
		C/D/G	Control Lever Fulcrum Pin		_
		E	Reversing Lever indicator		_
	14203	A/B	Boiler Tube		1.4.32
		C	Boiler Tube		_
		D	Boiler Tube		_
	14204		Arrangement of Brake and reversing Gear		1.4.32
	14205		Arrangement of Light Geared Car Boiler
	14206	A	Arrangement of Hoisting Winch fitted in Tyre Container Canopy and Bunker		4.4.32
		B/C	Winch Channel Cleat		_
		D	Flitch Plate for platform centre bearer		_
		E/F	Alteration made to 20-0 Platform Drg no 14211 when tyre carrier is fitted		_
	14207	A	Reversing Screw lever Pin, geared car		4.4.32
		B	Reversing Screw Lever Pin End		_
		C	Reversing Screw Spindle nut		_
		E	Blow-off Valve discharge pipe		_
		D	Reversing Index Plate angle		_
		F	Exhaust Steam Pipe		_
	14208		Heating Pipe (water tank)		4.4.32
		B	Heating Pipe Steady Plate, geared car		_
		C	Heating Pipe Steady Plate, geared car		_
		D	Distance Piece (sand box)		_
		F	Oil Filler Pipe Flange		_
	14209		Arrangement and Detail of frame for DG4 Side Tipping waggon with 15 -3" platform		5.4.32
	14210	A	Arrangement of Water Level Gauge, geared car		6.4.32
		B	Pump Feed Water Clip, railbus		_
		C	Injector Pipe Clip		_
		D	Water Level Gauge Lamp bracket		_
		E	Main Steam Pipe Clip		_
	14211
	14212	A/B	Water Filler Suspension Eyebolt, G/D car		6.4.32
		C/D	Tank Strap Packing piece		_
		E/F	Tank Strap		_
		G	Tank Filler Stay RH		_
		H	Tank Filler Stay LH		_
		J	Tank Filler Suspension Bracket LH		_
		K	Tank Filler Suspension Bracket RH		_
		L	Filler Lid Spring Clip		_
	14213		Engine Suspension Collar bolts, SS waggon		6.4.32
		B	Engine Suspension Link bolt		_
			Mudguard Support bolt		_
			Combustion Chamber Suspension bolt		_
			Special Side rail bolt		_
		D	Oil Heater Pillar bolt		_
			Combustion Chamber Suspension bolt		_
		N	Special Bolt for Fulcrum Lever		_
	14214	A	Control Rod jaw, railcar		9.4.32
		B	Throttle Valve Lever		_
		C	Valve Spindle end		_
		D	Suspension Link (throttle)		_
		E	Operating Lever		_
		F	Bell Crank Lever		_
		G	Special Coupling nipple		_
	14215		Arrangement of 15-3 DG4 Side Tipping Platform, (rear feed water tank)		12.4.32
	14216	A	Double Throttle Valve Bracket RH		11.4.32
		B	Double Throttle Valve Bracket LH		_
		C	Single Throttle Valve Bracket RH		_
		D	Single Throttle Valve Bracket LH		_
		E	Throttle Valve Y piece		_
	14217	A/C	Tank Filler Top		11.4.32
		B	Tank Filler Lid		_
	14218	A	Suspension Link Pin ( double throttle)		21.4.32
		B	Suspension Link Pin (single throttle)		_
		C	Control Rod Jaw Link Pin		_
		D	Control Rod Jaw Pin		_
			Control Link Pin		_
		F	Reversing Selector Switch pin		_
			Bellcrank Lever pin		_
	14219
	14220	A	Feed Heater Cover joint		11.4.32
		B	Pivot Cap Joint		_
		C	Oil Filler joint		_
		D	Top Cover Joint (water tank)		_
		E	Air and Sounding Pipe Flange joint		_
		F	Bogie Pivot Joint		_
	14221
	14222	A	Brake Beam Pivot bracket		12.4.32
		B	Gear Change Shaft Lever		_
		C	Hand brake Shaft Lever		_
		D	Hand brake Lever Quadrant		_
		E	Gear Change Shaft bracket		_
		F/G/H	Brake beam		_
	14223		Control Column		14.4.32
	14224	A	Arrangement of Speical Tailboard, DG4P		13.4.32
		B	Chain Eyebolt Shoe		_
		C	Tailboard Chain		_
			Tailboard Distance Piece		_
			Tyre Carrier Support Bracket		_
		H	DG4P 14'-6' platform		_
	14225		Throttle Control Lever, geared car		14.4.32
		B	Control Column Draught Protectior, 200/300 HP Geared car		_
		D	Protector Plate (short)		_
		E	Bearing Housing Support		_
		F	Lamp Bracket (rev. indicator)		_
	14226	A	Dynamo Oil Gland, DG waggon - mech stoker		14.4.32
		B	Dynamo Spur Pinion		_
		C	Front Mudguard Support LH		_
	14227
	14228		Front Axle		7.4.32
	14229	A	Intermediate Gear Spindle, SD		6.4.32
		B	Intermediate Gear Bush		_
		D	Wrist Pin Bush		_
		C	Piston		_
	14230	A	Arrangement of Special Cab, Canopy and Bunker, DG6P		5.4.32
		B	Arrangement of Tailboard for 19'-0' Flat platform		_
	14231	A	Lubr Drive Spur Gear		5.4.32
		B	Dynamo Spur Wheel		_
		C	Dynamo Spur pinion		_
		D	15 Tooth Chain Pinion		_
	14232		Frame for Special DG4 - 15'-3' platform		5.4.32
	14233	A	Engine Suspension Channel Cleat, DG waggon		6.4.32
		B	Frame Cross Stay Cleat		_
		C/G	Frame cross Stay		_
		D	Tank Support Channel		_
		E/H	Firegrate Bevel Wheel pin		_
		F	Brake Beam Guide		_
	14234	A	Throttle Valve Carrying Bracket, railcar		19.4.32
		B	Suspension Link (release)		_
		C	Control Link		_
		D	Control Rod Jaw Link		_
		E	Eyebolt		_
	14235		Arrangement of Frame, three way SS tipping waggon		9.4.32
	14236	A/B	Body Side Bracket DG6P		9.4.32
		C/D	Body Side bracket Arm		_
		E	Body Side Bracket Distance piece		_
		F/G	Body Side Buffer		_
			Rear Mudguard(rear half)		_
			Rear Mudguard(front half)		_
		M/R/U/V	Mud Flap Plate		_
		N	Tyre Carrier cleat		_
	14237	A	Dynamo Spur Pinion, DG waggon on pneumatics		8.4.32
		B	Dynamo Spur Wheel		_
		C	Radius Rod Pin Securing P?		_
		E	Cab Door Hinge		_
		D	Container Floor Door Support bracket		_
		F	Cab Door Hinge		_
		G	Slicer Stop		_
	14238	A	Engine Suspension Cahnnel		11.4.32
		B	Tipping Bracket Support Channel		_
		C	Tipping Cylinder Cross Channel		_
		D/E	Tipping Cylinder Support channel		_
	14239
	14240
	14241		Control Rod, railcar		14.4.32
			Control Rod, railcar		_
	14242
	14243	A	Indicator Plate (light oil)		21.6.32
		B	Indicator Plate (heavy oil)		_
		C	Instruction Plate Wording		_
		D	Funnel Blast Pressure Gauge Nameplate		_
		E	Wording for Instruction plate		_
	14244		Alterating to Existing Frame		4.4.32
	14245		Tipping Platform, DG6 Special Tipping waggon		14.4.32
	14246	A	Tipping crosshead, DG6 Special Tipping waggon		7.4.32
		B	Tipping Crosshead Joint Pin		_
		C	Tipping Crosshead Washer		_
		D	Tipping Crosshead Stiffening plate		_
		E	Tipping Crosshead Joint		_
		F	Tipping Crosshead Stiffening ring		_
		G	Tipping Pivot Joint cleat		_
	14247
	14248	A	Arrangement of Throttle and Release Valve Chests, geared car 200 HP		30.4.32
		B	Arrangement of Throttle and Release Valve Chests, geared car 100 HP		_
	14249	A	Arrangement and Detail of 27" Headboard for Dg4P Side Tipping waggon		14.4.32
		B/C	Platform Front Corner angle		_
		D	Bodyside Stanchion, DG4PST		_
		E/F	Platform Rear Corner angle		_
		G	Bodyside Recess Cover plate		_
		H	Body Side Stanchion knee		_