13750	A/B	Tailboard Stiffening Angle	11.9.31
	C	Tailboard Catch bar	_
	D	Body Side Cope Bar (centre)	_
	E/F	Body Side Stiffening angle	_
	G/H	Tailboard Plate (inner and outer)	_
13751	A/B	Tailboard Hinge	14.9.31
	C	Tailboard Inside Washer plate	_
	D	Tailboard Centre Washer plate	_
	E/F	Side Rear Cope bar	_
	G/H	Side front Cope bar	_
	J/K	Tailboard End Protection plate	_
	L	Details of Water Tank fitted with Heater	_
13752		Arrangement of Tipping Platform showing alteration to platform drg no. 5308 to convert Super tipper to six wheeler tipper	11.9.31
13753	A	Rear A Bearing Cover	11.9.31
	B	Wheel Hub Set Pin	_
	C	Axle Shaft Nut Locking plate	_
	D-N	Brake Cam	_
13754	A	Frame Rear Cross Bar	14.9.31
	B/C	Tipping Platform Front bracket	_
	D	Tipping Platform Stop bracket	_
	E	Steam Brake Cylinder Support bracket	_
13755	A/B	Engine Side Suspension Bracket	17.9.31
	C	Oil Pump Bracket	_
	D/E	Enlarged Scrap Plan showing Drilling for Steady Bracket	_
	F/G	Tank strap Rear Bracket	_
	H/J	Tank Strap Front Bracket	_
13756	A	Thrust Bearing Shim	14.9.31
	B	Layshaft Bearing Shim	_
	C	Diff. Shaft Washer housing	_
	D	Diff. Shaft Washer	_
	E	Diff. Shaft Washer clip	_
	F	Diff. Shaft Washer Retaining ring	_
	G	Brake Fulcrum Pin	_
13757	A/B	Feed Pump Spindle Oil Pipe	15.9.31
	C	Oil Relief Valve Return Pipe	_
	D/H	Platform Guide plate	_
	E	Body Fixing Bracket	_
	F	Platform Front packing	_
	G	Platform Front Support channel	_
13758
13759		30" Dia Wheel	15.9.31
13760		Arrangement of Mechanical Stoker, DG waggon	21.3.32
13761		Detail of frame 20FT Platform Duper Sentinel 6" wheel waggon	15.9.31
13762	A/B	Footplate Stay	16.9.31
	C	Cab Stanchion Stay - side	_
	D	Ashpan Lifter Push Rod End - top	_
	E	Funnel Clip	_
13763		Arrangement of Cab Canopy and Bunker	22.10.31
13764	A/D	Air Compressor Bracket	22.9.31
	B	Dynamo Support Bracket	_
	C	Dynamo Cover	_
13765	A	Axle Casing Oil Trough - bottom	15.9.31
	B	Axle Casing Oil Trough - top	_
	C	Felt Washer Retainer - inner	_
	D	Felt Washer Retainer - outer	_
	E	Brake Lining	_
	F	Torque Tube Bracket Packing plate	_
13766		Frame 18 FT Platform	8.9.31
13767
13768		Arrangement of Headboard and Special Drilling in Rtipping Platform, DG6 tipper	19.9.31
13769		Frame for "Super-Sentinel" Six Wheel Waggon fitted with pneumatic tyres, converted from "super-sentienl" four wheel tipping waggon	19.9.31
13770	A	Arrangement of Automatic Drain Valve	18.9.31
	B	Drain Valve Tee Piece	_
	C	Drain valve body	_
	D	Drain Valve Seat	_
	E	Drain valve	_
	F	Drain Valve spring	_
	G	Driving Shaft Oil Nozzle	_
13771	A	Crankshaft Nut LH	20.1.38?
	B	Dynamo Support Bracket Cleat	_
	C	Arrangement of Compressor and Dynamo Drive and Details of drilling in frame	_
	E	Body Side Stanchion knee	_
	F/G	Partition Stop(side)	_
	E	Body Side Stanchion knee	_
	H	Partition stop(bottom)	_
13772		Arrangement of Rear Axle, 6 wheeler
13773	A	Mudguard End Attachment	24.5.31
	B	End Attachment Boss	_
	C	End Attachment Doubling plate	_
	D/E	Mudguard End Catch bracket	_
	F	Catch Bracket Doubling plate	_
	G	Centre Attachment Doubling plate	_
	H	Mudguard Attachment screw	_
	J	Centre Stay boss	_
13774		Detail of Tipping Platform for Super-Sentinel Four Wheeled Side tipper	22.9.31
13775
13776		Tipping Platform showing alteration to platform drg no. 5308 to convert Super Tipper to Six Wheeler on pneumatic tyres	22.9.31
13777		Rear Top Mudguard	23.9.31
13778
13779		Arrangement of Brake reversing and gear change controls for 18" - 0" platform shaft drive waggon	30.9.31
13780	A	Arrangement of Rear Axle Mudguards	24.9.31
	B	Rear Mudguard Rear End	_
	C	Rear Mudguard Front End	_
	D	Rear Mudguard Cross Stay	_
	E	Rear Mudguard Support (front end)	_
	F/G	Rear Mudguard Rear Bracket	_
	H	Rear Mudguard Front bracket	_
13781		Arrangement of wheels, axle, sprockets and springs	15.10.31
13782		Arrangement of Front Axle and Steering Gear - side elevation	24.9.31
13783		Arrangement of Front Axle and Steering Gear - plan view	25.9.31
13784
13785	A	Rear Mudguard Centre Bracket	26.9.31
	B	Front Mudguard Block	_
	C/D	Front Mudguard	_
	E	Front Mudguard Plate	_
	F/G	Front Mudguard Support	_
	H	Front Mudguard Bracket plate	_
	J	Front Mudguard bracket RH	_
	K	Injector Overflow Pipe bracket	_
13786		Alterations to "Super" 15"-3" flat platform frame to convert to "Super" 15" - 3" side tipping waggon	28.9.31
13787		Arrangement of Gear Box	28.9.31
13788		Sentinel Patent Water Tube Boiler, loco	29.9.31
13788 2nd		Sentinel Patent Water Tube Boiler, loco	29.3.31
13789		Arrangement of 18"-0" Flat platform	29.9.31
13790		Arrangement showing alteration to "Super-Sentinel" cab to accommodate spare wheel	29.9.31
13791		Arrangement of Steam and Exhaust piping	2.11.31
13792
13793	A/B	Steering Column Support and cap	30.9.31
	C	Foot Release Lever Bracket	_
	D	Release Valve Foot Lever	_
	E	Injector Support bracket	_
13794		Drivers Brake Valve Position of Controls, CE and CEDG locos	30.9.31
13795	A	Arrangement of Canopy Rack and Auxiliary Bunker Filling door	30.9.31
	B	Arrangement of Canopy Rack and Auxiliary Bunker	_
13796		Arrangement showing Holes in Footplate	30.9.31
13797
13798	A/B	Rear Mudguard Rear half	3.10.31
	C/D	Rear Mudguard Front half	_
	E/F	Rear Mudguard Rear Stay	_
	G	Rear Mudguard Cross stay(bottom)	_
	H	Rear Mudguard Cross stay (top)	_
13799	A/B	Rear Mudguard Front Bracket	3.10.31
	C	Rear Mudguard Rear Bracket	_
	D	Rear Mudguard Front stay	_
	E/F	Mudguard Support Stay Tie Bar	_
	G	Rear Mudguard Cross Stay (top)	_
	H	Rear Mudguard Front stay	_
	K/J	Front Footplate Support Bracket	_
13800		Water tank	6.10.31
13801		Arrangement of Boiler Scum Tray and Valve	6.10.31
13802	A	Scum Tray Boss	3.10.31
	B	Scum Tray Lug	_
	C	Scum Tray	_
	D	Brake Torque Rod cap (forging drawing)	_
	E/F	Front Axle Cap - top	_
	H/G	Front Axle cap - bottom	_
13803	A	Injector Suction elbow	5.10.31
	B	Tail Lamp Bracket	_
	C	Head Lamp Bracket	_
	D	Exhaust Valve Cap	_
	E	Rear Bogie Stop	_
	F	Bogie Stop Buffer	_
	G	Pump Suction and Return Pipe hanger	_
13804		Arrangement of 19"-0" Flat platform, DG6	6.10.31
13805	A	Gland Box Cover joint	6.10.31
	B	Water Filter Joint	_
	E/D	Front Mudguard Centre bracket	_
	C	Arrangement of Trailer Front mudguard	_
	F	Front Mudguard Rear support	_
	H/G	Front Mudguard Front Support bracket	_
13806	A	Tank Suction Pipe (pump delivery)	8.10.31
	B	Tank Suction pipe(injector delivery)	_
	C	Tank Well Angle	_
	D/E	Tank Rear Stop Bracket	_
	F/G	Tank front Stop Bracket	_
	H	Tank Strap	_
	K/J	Tank Carrying channel	_
	L	Tank carrying Channel Gusset plate	_
13807		Arrangement of DG4 Waggon showing Loading Gear with Bollard, worm driven by engine	6.10.31
13808		Arrangement of Injectors below Footplate	8.10.31
13809	A	Arrangement of Tank Water Level gauge	7.10.31
	B	Water level Gauge float	_
	C	Water level Gauge rod	_
	D	Water gauge Control Nipple	_
	E	Water gauge Rod guide	_
	F	Brake Spring clip	_
	G	Front Axle Pivot Bush pin	_
	H	Brake Beam Pin Distance piece	_
13810		Water tank, DG4 with light fittings	16.10.31
13811		Tipping Platform for Dg6T on pneumatics	7.10.31
13812	A	General Assembly of Spare Tyre carrier	7.10.31
	B	Spare Tyre Carrier Bracket	_
	C	Spare Tyre Carrier Handwheel	_
	D	Spare Tyre Carrier sleeve	_
	E/F	Spare tyre Support bracket	_
	G	Tyre Carrier Screw	_
	H	Tyre Carrier Screw Protection tube	_
	J	Tyre carrier Screw washer	_
13813	A	Hand Wheel Locking lever	8.10.31
	B	Hand Wheel Locking Lever pin	_
	C	Spare Tyre Lifting plate	_
	D	Lifting Plate dowel	_
	E	Rear Spring Buckle Bolt	_
	F	Buckle Bolt Locking plate	_
		"Hank" bush	_
13814		Arrangement of 30-31 CWT Grabbing Post crane	7.10.31
13815	A	Centre Tank Strap Bracket	12.10.31
	B/C	Rear Mudguard (front end)	_
	D/E	Rear Mudguard (rear end)	_
	F/G	Rear Mudguard Support (centre)	_
	H/J	Rear Mudguard Support 9rear)	_
	K/L	Side Ramp Front Block Support Bracket	_
	L	Arrangement showing alteration to DG6 platform drg no. SB 753	_
13816	A	Steering Pivot Cap - front	13.10.31
	B/C	Steering Pivot Cap - rear	_
	D	First Steering lever	_
13817
13818	A	Side Support Knee	9.10.31
	B/C	Rear Corner Plate (bottom)	_
	D/E	Stiffening angle (inside)	_
	F/G	Front Mudguard Rear Stay	_
	H	Brake Rope Roller bracket	_
		Trailer Brake Rope Roller	_
	K	Roller Spindle	_
	L	Roller Bush	_
13819		Arrangement and Detail of Box Van Body fitted with Side and rear Lock Up doors	12.10.31
13820	A	Arrangement of 30" Headboard for DG6T on pneumatics	12.10.31
	B	Body Side Stanchion Knee (30" sides)	_
13821		Arrangement and Detail of DG4 Three-way tipping platform, pneumatic tyred waggon	12.10.31
13822		Arrangement and Detail of Super-Sentinel Cab with spare wheel compartment	12.10.31
13823
13824		Arrangement of 28" Headboard for DG4T on Pneu Tyres	12.10.31
	B/C	Platform Rear Corner angle	_
	D/E	Platform Front Corner angle	_
	F/G	Side End Protection plate	_
	H	Snubber Chain bracket	_
13825
13826	A	Sanding Bell Crank Lever	19.10.31
	B	Sanding Box lever (front)	_
	C	Sanding Valve spindle	_
13827	A/B/K/L	Body Side Catch	14.10.31
	C	Body Side Catch Pin	_
	D	Body Side dowel pin	_
	E	Catch Pin Boss	_
	F	Body Side Catch Boss	_
	M/J/G	Dowel Pin Washer	_
	H	Side catch Rubbing plate	_
13828		Rear Hub	14.10.31
13829
13830		Front Hub, DG pneumatic tyred waggons	15.10.31
13831	A	Spare Tyre Carrier	15.10.31
	B	Lug for Spare Tyre carrier	_
	C/D	Stay for Spare Tyre carrier	_
	E/F	Rear Mudguard Top Support (rear half)	_
	G/H	Rear Mudguard Bottom Support (rear half)	_
	J	Arrangement of Spare Tyre Carrier	_
13832	A	Trailer Draw Bar Bracket	15.10.31
	B	Draw Bar Bracket	_
	C	Arrangement of Trailer Draw Bar bracket	_
	D/E	Headboard Cope bar	_
13833	A	Front Boiler Channel	16.10.31
	B	Rear Engine Stay	_
	C	Front Engine Stay	_
	D	Rear Engine Stay	_
	E	Rear Engine Stay	_
	F	Rear Boiler stay	_
13834	A	Modified Rear Mudguard Arrangement	17.10.31
	B/C	Rear Mudguard	_
	D	Rear Mudguard Front Support	_
	E	Rear Mudguard Stiffening plate	_
	F	Arrangement and detail of partition	_
13835		Arrangement and Detail of frame to suit 25% LTS boiler	3.2.31
13836		writing and date missing
	B	Panel Fixing bracket	_
	C	Panel Fixing socket	_
	F	Arrangement of Spare Tyre Carrier and detail of drilling in Frame	_
13837		Water Tank, DG6 on pneumatic tyres with standard CI fittings	14.10.31
13838
13839	A	Half Firegrate	23.10.31
	B	Firegrate Support	_
13840	A	Arrangement and details of rear Letter Board and Star panel	20.10.31
	B	Arrangement of headboard fitted to 15"-3" platform with 22 3/4" hinged sides	_
	C	Headboard Knne	_
	D/E	Headboard Support angle	_
13841	A/B	Platform rear Corner angle
	C/D/L	Tank Pocket Plate Stiffener angle	_
	E/F/M	Tank Pocket plate	_
	G	Floor Support angle	_
	H	Bearer Support angle	_
	J	Bearer Support angle	_
	K	Platform Ramp plate , CANCELLED?	_
13842	A	Arrangement of Compressor Drive and details of Drilling in frame	21.10.31
	B	Hose Bracket Extension plate	_
	C	Headboard Outside Washer plate	_
	D	Front Catch bracket	_
		Side rail Cope bar	_
13843		Arrangement of Steam and Vacuum Brake Ejector Controls (on boiler), CE, CEDG and DEDG locos)	10.11.30
13844	A/B	Rear Mudguard Rear half	21.10.31
	C/D	Rear Mudguard Front half	_
	E/F	Rear Mudguard Front bracket	_
	G/H	Rear Mudguard Rear Stay	_
13845
13846		Arrangement of Thermofeed regulator control valve and pipes fitted to the 40/60 portable PU	22.10.31
13847	A	Pump Delivery to feedheater pipe	26.10.31
	B	Pump Return Pipe no 1	_
	C	Pump Return Pipe no 2	_
13848	A	Thermofeed Regulator to Control Valve Pipe	27.10.31
	B	Boiler to Regulator Steam pipe	_
	C	Boiler to Regulator Water pipe	_
13849	A	Control Valve bracket	27.10.31
	B	Pump Suction Pipe	_
	C	Regulator Exhaust pipe	_
13850
13851		Arrangement of Firegrate	23.10.31
13852		Crosshead Guide	24.10.31
13853
13854	A	Special Blow-off Valve	26.10.31
	B	Water Filter Cover	_
	C	1/2" Female Elbow	_
	D	Eye Bolt for Gearbox	_
	E/F	1/2" Male to 1/2" Female elbow	_
13855	A	Foot Plate Stiffening Plate (centre) to be used when enclosed type cab is fitted	9.11.31
	B	Foot Plate Stiffening Plate (rear) to be used when enclosed type cab is fitted	_
	C	Engine Suspension channel	_
	D/E	Headboard Support Stay	_
	F	Tank carrying block	_
	G	Tank strap	_
	H	Rear mudguard support	_
13856	A	Arrangement of Valve gear Cover fixing	29.1.31
	B	Valve Cover Knob	_
	C	Valve Cover stud	_
	D	valve Cover Locating pin	_
	E/F	Piston Holding plate	_
13857	A/J	Trailer Draw Bar Bracket Cahnnel	29.10.31
	B/K/L/P	Draw bar Channel stiffener	_
	C	Draw Bar Channel Gusset plate	_
		Draw Bar Channel stay	_
	G/F	Step to Footplate	_
	H	Drawbar Channel Distance piece	_
13858	A	Arrangement of Draw Bar Bracket 9rear) for pneu tyred trailer	29.10.31
	B	Tail Lamp Bracket	_
	C	Roller End Clip	_
	D	Arrangement of Trailer Brake Rope Roller	_
13859	A/B	Steam Brake lever	2.11.31
	C/D	Hand Brake Lever	_
13860	A	Alteration to frame Drg 13554 to suit job. 8618	2.11.31
		Arrangement of DG4P 15"-3" platform with speical cross tank	_
13861	A	Arrangement of 28" Headboard for DG6T on pneu tyres	3.11.31
	B/C	Platform Rear Corner angle	_
	D/E	Platform Front Corner angle	_
	F	Body Side Stanchion	_
	G	Filter pad	_
13862		Water Filter body	4.11.31
	E	Cylinder Front Cover	_
	F	Exhaust Valve cap	_
13863		Arrangement of Injector Overflow Pipes	5.11.31
13864	A	Injector Overflow Pipe bracket	4.11.31
	B	Overflow Pipe adaptor	_
	C	Crankcase Breather vertical engine	_
	D	Crankcase Breather cap, vertical engine	_
13865		Arrangement of Headboard 4"-1" High for Special DG6 14"-5" Flat platform waggon	9.11.31
13866	A/B	Platform Front Corner plate	9.11.31
	C/D	Platform Rear Corner plate	_
	E	Side front End Protection plate	_
	F	Tailboard Hinge	_
	G	Tank Stop Bracket	_
	H	Tank Stop Plate	_
	J	Detail of Drilling in frame for platform holding Down Bolts and platform stay bolts	_
13867		Detail of frame for special DG6 14-5" platform	date missing
13868		Arrangement of Steam and Exhaust Piping	10.11.31
13869		Arrangement and detail of frame, for conversion of super sentinel 4 wheeler to rigid 6 wheeler	11.11.31
13870	A	Crosshead	12.11.31
	B	Piston Rod	_
	C	Piston Rod Locking plate	_
13871	A/B/C	Spare Tyre carrier
	D/L	Tyre Carrier Support bracket	_
	E/M	Bearer End Plate	_
	F/G	Headboard Support	_
	H	Headboard Cross stay	_
	J/K	Headboard Stay	_
13872	A	Alteration to Platform	13.11.31
	B/C	Rear Mudguard (rear)	_
	D	Rear Mudguard (front)	_
	E	Bearer End plate	_
	F	Packing Piece for Tipping Platform Stop bracket	_
13873	A/G	Tyre Carrier Hinge bracket	12.11.31
	B	Hinge Bracket pin	_
	C/J	Tyre Carrier Lifting Nut	_
	D	Lifting Nut Washer	_
	E	Tyre Carrier Lifting Screw	_
	H	Lifting Screw Distance piece	_
	F	Arrangement of Roping Rings on Cab Roof	_
13874	A	Alteration to Platform 5352	12.11.31
	B	Alteration to Frame 12064	_
	C	Headboard Side Knee Bolt	_
		Lifting Screw pin	_
		Mudguard Centre bracket	_
	F	Mudguard Stiffening plate	_
13875		Arrangement of DG Small Boiler	18.12.31
13876	A	Gland Box Cover	date missing
	B	Engine Suspension	_
	C	Drivers Footrest	_
	D	Steam and Oil Gauge bracket	_
	E	Drivers Footrest clip	_
	F	Front Wheel Cap	_
13877		Arrangement of Tyre carrier	14.11.31
13878		Arrangement of DG6 18"-0" Flat platform	13.11.31
13879		Arrangement of DG6 18-0" Flat platform	14.11.31
13880		Arrangement of Clutch fitted Super Sentinel Engine (LH side)
13881	A	Tailboard Knee	17.11.31
	B	Tailboard Knee Socket	_
	C	Tailboard Knee Socket Plate	_
	D	Chain Eyebolt Shoe	_
	E/J	Chain Eyebolt	_
	E/J	Tailboard Chain	_
	G	Roping Ring Knee	_
	H	Roping Eyebolt	_
13882
13883		Arrangement of Feed heater	20.11.31
13884		Feed Heater Body	18.11.31
13885		Arrangement of Platform with Tarpaulin Bows	19.11.31
13886
13887	A	Engine Suspension Link	20.11.31
	B/F	Engine Suspension Link Distance Bracket	_
	C	Suspension Link Palm	_
	D	Oil Return Pipe	_
	E	Oil Return Pipe RH side CANCELLED 20.1.32	_
13888		Arrangement of DG Special Frame	23.11.31
13889	A	Arrangement of Headboard for 15"-3" platform drg 5351	24.11.31
	B	Headboard Outside Centre Cope bar	_
	C	Headboard Cope bar	_
	D	Tailboard and Side Front end protection plate	_
	E	Side rear End protection plate	_
		Centre Post Stanchion	_
		Headboard Inside cope ?Bracket?	_
13890		Detail of frame, 17-0" platform, super sentinel on pneu tyres	24.11.31
13891		Arrangement of Cylindrical Crossheads and Oil return pipes	22.11.31
13892	A	Oil Return Pipe	30.11.31
	B	Canopy Flame Guard	_
	C/F	Canopy Protection Plate	_
	D/G	Crosshead Guide Cover	_
	E	Cover Joint	_
13893		Arrangement of Engine Gland and Screws Pump, DG waggon 6"x8" engine	2.10.30
13894
13895	A	Boiler Foot Clamp	26.11.31
	B	Tank Strap	_
		Floorboard Support bracket	_
	J	Tail Lamp bracket	_
	K	Tail Lamp bracket	_
	L	Boiler Foot	_
	M	Platform End Washer Plate	_
	N	Feed tank Protector Board Bracket	_
13896		Spare Tyre Carrier	3.12.31
		Tyre carrier Support Bracket	_
	E	Trailer Rear Mudguard Centre Bracket	_
	F	Alteration to Platform	_
		Tyre Carrier stay	_
13897		Arrangement of Special DG4 17"-0" platform with 34" hinged sides and 36" hinged tailboard	30.11.31
13898		3/4" Space Firegrate - centre portion	30.11.31
13899		Firegrate - outer portion	30.11.31
13900	A/E	Firegrate Trunnion	30.11.31
	B	Pulley Bracket	_
	C	Pulley Pin	_
	D	Packing piece	_
13901		Arrangement of Firegrate	30.11.31
13902		Diagram of Clearances, LMS Clee Hill loco	30.11.31
13903		Arrangement of Safety Valve	1.12.31
13904	A/B	Rear Corner Plate	1.12.31
	C	Side and Tailboard hinges	_
	D	Platform Floor plate	_
	E	Platform Side Rail plate	_
	F/G	Platform Side Rail Angle	_
	H	Tailboard Hinge bracket	_
	K/M/L/J	Tailboard Hinge bracket	_
13905		no description or date
13906	A/B	Radius Rod Socket	3.12.31
	C/D	Radius Rod Socket	_
	E	Tank Filling Pipe flange	_
		Distance Piece	_
	G	Brake Plate Bracket Support	_
	H	Hand Brake Weigh Shaft	_
13907	A	Steam Brake Bracket	5.12.31
	B	Brake Compensating Link	_
	C	Brake Guide Rod	_
	D/E	Brake Guide Rod Bracket	_
	F	Brake Stop Bracket	_
	G	Dynamo Support bracket	_
	H	Dynamo Support bracket cleat	_
13908	A	Low Gear Spur Wheel Centre	7.12.31
	B	Differential sleeve	_
13909	A	High Gear Pinion	9.12.31
	B	High Gear Spur Wheel	_
	C	Low Gear Spur Wheel	_
	D	Camshaft Spur Pinion	_
13910		Arrangement of Dynamo and Compressor Drive, DG waggon	6.1.32
13911		Water Tank for DG4 and DG6 Tipping waggons	8.12.31
13912		Arrangement of Two Way Valve and Relief Valve	8.12.31
13913		Arrangement of Engine Suspension and Torque Stay Gear	9.12.31
13914		Arrangement of Three Way Tipping platform	10.12.31
13915	A	Arrangement of Headboard for DG6T Waggon Body with 32 1/2" hinged tailboard	11.12.31
	B/C	Platform Rear Corner angle	_
	D/E	Platform front Corner angle	_
	F	Body Side stanchion	_
13916	A	Air Compressor Bracket	9.12.31
	B	Dynamo Support bracket	_
	C	Dynamo Cover	_
13917	A/B	Body Side protection plate	11.12.31
	C/D	Tailboard Hinge	_
	E	Tipping Side Hinge	_
	F	Tailboard Protection plate	_
	G	Tailboard Centre Washer plate	_
	H	Tailboard Outside washer plate	_
	J	Hose Bracket Extension plate	_
13918	A	Arrangement of Air Compressor and Dynamo Drive and Deatil of Drilling in Frame	11.12.31
	B	Tyre Carrier Suuport Bracket	_
	C/D	Rear Mudguard Rear Support	_
	E	Arrangement of Rear Mudguard	_
	F/G	Rear Mudguard Front Support	_
	H	Support Bracket Distance piece	_
13919	A	Body Capacity plate	14.12.31
	B	Arrangement and details of drilling in headboard for body capacity plate	_
	C	Vertical Cope bar	_
	D	Vertical Cope bar	_
	E/H	Rear (RH) Sliding Window	_
		Tank Supporting block	_
13920		Arrangement of Tyre carrier	15.12.31
13921	A	Compensating Link Guide plate	10.12.31
	B/J/C/H	Guide Plate Distance piece	_
	D/E	Steam Brake Support Channel	_
	G	Brake Gear Front Cross Support	_
	F	Steam Brake Tie bar	_
13922		Water Tank, DG6 on pneumatic tyres (light fittings)	27.5.31
13923	A	Headboard Cope bar	17.12.31
	B	Tailboard Cope bar	_
	C	Tailborad Inside cope bar	_
	D	Tarpaulin Rail post socket plate	_
	E	Tarpaulin Rail post socket	_
	F	Tailboard Plate	_
	G	Tarpaulin Rail post	_
	H	Tarpaulin rail	_
13924	A	Tarpaulin Rail Support	17.12.31
	B/H	Headboard Knee	_
	C	Headboard Knee angle, CANCELLED 31.3.32	_
	D	Headboard Knee Cope Bar	_
	E	Tarpaulin Rail Binding plate	_
	F	Headboard Cope Bar inside	_
	G	Headboard Cope Bar Outside	_
13925	A	Steam Brake Cylinder, DG4 and DG4T waggons	16.12.31
	B	Brake gear Rear Cross Support angle	_
		Tipping Bracket Cros Channel Cleat	_
	H/E	Tipping Bracket Cross Channel Packer	_
13926
13927	A	Arrangement of Headboard of Body with 32" hinged Sides and tailboard for Dg4T waggon	16.12.31
	B/C	Platform Rear Corner angle	_
	D/E	Platform Front Corner angle	_
	F/G	Tailboard Hinge	_
	H/J	Tailboard Washer plate	_
13928	A	Arrangement of Safety Valve	16.12.31
	B	Safety Valve Cap	_
	C	Safety Valve	_
	D	Safety Valev Adaptor	_
	E	Safety Valve nipple	_
13929	A	Air Extractor Bell, geared car	18.12.31
	B	Air Extractor tube	_
	D	Tube ferrule	_
	C	Arrangement of Air Extractor	_
13930		Arrangement and detail of frame for DG4 PT waggon (special)	23.12.31
13931	A	Arrangement of Jockey Sprocket for Dynamo drive	18.12.31
	B	Bracket for Jockey Sprocket Eyebolt	_
	C	Adjusting Eye-bolt for Jockey sprocket	_
	D	Jockey Sprocket for Dynamo Drive	_
	E	Pin for Jockey Sprocket	_
	F	Suspension Bracket for jockey Sprocket	_
	G	Cam Follower Guide	_
13932		Firegrate Bevel Wheel	17.12.31
13933	A/B	Platform Rear Corner angle	29.12.31
	C/D	Platform Front Corner angle	_
	E/F	Headboard Side angle	_
	G	Cross Chain Hook	_
	H	Headboard Centre angle	_
	K/J	Snubber Chain Bracket(front)	_
	L	Tipping Side Hinge bar	_
13934		Arrangement of Cab, LNER Crane loco
13935
13936	A	Arrangement of Steam Brake valve	18.12.31
	B	Steam Brake Valve Body	_
13936 2nd	A	Arrangement of Steam Brake valve	12.12.31
	B	Steam Brake Valve Body	_
13937	A	Brake valve Spindle	21.12.31
	B	Brake valve bush	_
	C	Brake valve lever	_
	D	Valve Spindle Gland Nut	_
	E	Brake valve Spindle gland	_
	F	Brake valve Plug	_
	K	Brake Valve seat	_
	G	Brake valve Spring plug	_
	H	Brake Valve	_
	J	Brake Valve Lever Pin	_
13938		Arrangement of Water Tank	19.12.31
13939		Detail of frame, 15-3" platform, super sentinel on pneu tyres	21.12.31
13940	A	View shewing Side rail cut away to clear Mudguards, and Alteration to position of platform holding down brackets, 15-3" platform Super sentinel on pneu tyres	21.12.31
	B	Alteration to platform bearer to clear Engine Suspension	_
	C	Alteration to 17-0" platform to take Tyre carrier to clear Steam Brake gear	_
13941
13942
13943	A	Mechanical Stoker Conveyor	23.12.31
	B/C	Mechanical Stoker Spindle	_
13944	A	Tipping Front pivot Support Channel RH	29.12.31
	B	Tipping Front pivot Support Channel LH	_
		Tipping Bracket Cross Channel cleat	_
	E/P	Tipping Cylinder Support Channel cleat	_
	F/G	Boiler Support Channel cleat	_
	H/J	Tank and Bunker Holding Down bracket	_
	K	Tank Strap Eye bolt	_
	L	Bunker Front Holding down bracket	_
13945	A	Half Firegrate (?/8" spaces)	21.12.31
	B	Firegrate Roller pivot bracket	_
	C	Firegrate Roller Rear bracket	_
	D	Firegrate Roller Front Bracket	_
13946		Proposed Arrangement of Superheater Coils, geared car boiler drg no. 9774
13947		Arrangement of Instrument Board and Bracket	30.12.31
13948		Arrangement and detail of Instrument board	30.12.31
13949	A	Instrument Board Bracket	30.12.31
	B	Instrument Board Bracket Stay	_
	C	Headboard Knee	_
	D	Headboard Knee angle	_
	E	Rear Top Mudguard Bracket	_
13950		Bunker Base	6.1.32
13951	A	Firegrate Roller	30.12.31
	B	Firegrate Roller pin	_
	C	Firegrate Bevel Pinion	_
	D	Firegrate Stop Bracket	_
	E	Firegrate Pinion Bearing Cover	_
	F	Firegrate Pinion Bearing Housing	_
13952	A	Winch Shaft - special timber hauling tractor	1.1.32
	B	Loose Collar	_
13953		Outline Arrangement DG6 Waggon with 19-0" platform	1.1.32
13954	A	Stay for Partition Plate
	B/C	Fork End for Stay	_
	D	Partition Plate pivot	_
	E	Catch Pin	_
13955	A	Tarpaulin Rail Support (front)	5.1.32
	B/C	Tailboard catch Bracket	_
	D	Tarpaulin Rail Support (rear)	_
	E/F	Rear Tarpaulin Rail Support Tongue	_
	G	Tarpaulin Rail Support socket	_
	H	Tailboard Centre Hinge	_
	J	Tarpaulin Rear Support Cleat	_
13956		Arrangement and Detail of DG4 End Tipping Waggon Frame (pneu)	6.1.32
13957		Tipping Platform for DG4 End Tipper (pneus)	11.1.32
13958	A/B/C/D	Tailboard Hinge (outer)	6.1.32
	E	Tailboard Cope Bar	_
	F	Tarpaulin Rail Binding plate	_
	G	Tarpaulin Rail Shoe	_
	H	Tarpaulin Rail	_
	J	Tailboard Stay Eyebolt	_
13959
13960	A	Tailboard Coping	7.1.32
	B	Packer for tailboard Side Hinge	_
	C	Tailboard Centre Hinge	_
	D	Tailboard Stay	_
	E/F	Washer Plate for Side Tailboard hinge	_
	G	Tailboard Facing plate	_
13961		Lubricating Chart for "Sentinel" DG waggons on pneu tyres	15.1.32
13962		Arrangement of Stop valve Chest	19.1.32
13963	A	Stoker Barrel	7.1.32
	B	Mechanical Stoker bush	_
	C	Clutch Fork Bracket	_
	D	Cross Shaft Bearing	_
	E	Cross Shaft Bearing packing piece	_
13964		Headed pins	30.3.32
	C	Headed pins	_
	F	Spring Calmp Bolt, DG6PT	_
	G	Spring Buckle bolt	_
		Headed pins	_
	E	Stoker Control Quadrant Bolt	_
	H/K	Firegrate bolt	_
	J	Loader Pulley Journal bolt	_
13965		Arrangement of DG6 with Movable floor	8.1.32
13966		Proposed Arrangement of Type Pump Drive	23.6.32
13967	A	Distance Piece	12.1.32
	B	Ashpan Door Catch Bracket	_
	C	Packing Piece	_
	D	Rear Axle Loading Rope	_
	E/F	Pulley Return Spring	_
13968	A	Arrangement and detail of tank carrying Boards, waggon	11.1.32
		Tank Board Support angle	_
	C	Support Tie	_
	D	Arrangement of Tank Board support	_
	E	Tank Strap	_
13969	A/B	Firegrate Bearers	30.11.31
	C/K	LH Supporting Links	_
	D/L	RH Supporting Link	_
	E/F	Supporting Link Bracket	_
	G	Supporting Link Bracket - front	_
	H	LH Link Lower Pin	_
	J	Firegrate Support Stud	_
13970	A/E	Ashpan, geared railcar	30.11.31
	F/G	Inner Ashpan Brackets	_
	H/J	Outer Ashpan Brackets	_
	K/L	Ashpan Bracket	_
	M	Lifting Chain Angle bracket	_
13971		Arrangement and details of Rear Cover and Mudguards, DG tractor	13.1.32
13972		Dynamo, Compressor and Mechanical Stoker Drive cover
13973	A	Spare Tyre Carrier
	B	Arrangement of Spare Tyre Carrier	_
	C/D	Tyre Carrier Stay	_
	E/F	Mudguard Rear Support Bracket	_
	G	Mudguard Top Support Bracket	_
	H	Mudguard Protection Plate	_
13974	A	Bracket for partition Stay	12.1.31
	B/C	Angle Washer Plate for Hinge Bracket	_
	D	Stop for Hinged Partition	_
	E	Washer Plate for Stop	_
	F/G	Side Seal for Hinged Partition	_
	H	Washer Plate for Side Seal	_
	J	Sealing Strip for Hinged partition	_
13975		Trailer Front Hub	12.1.32
13976		Trailer Rear Hub	12.1.32
13977		Ratchet Gear Casing	12.1.32
13978		Rear Mudguard	14.1.32
		Front Mudguard	_
		Rear Mudguard	_
		Rear Mudguard	_
13979		Arrangement of Hinged Partition in DG4TP Waggon	14.1.32
13980	A	Ratchet Gear Casing Cover	13.1.32
	B	Ratchet Gear Top Cover	_
	C	Conveyor Bearing Cover	_
	D	Ratchet Adjusting plate	_
13981	A	Arrangement of 28" Headboard for DG4 End T(pneu)	14.1.32
	B/C	Rear Corner Angle	_
	D	Tailboard Protection plate	_
	E/F	Arrangement and Drilling in Frame for Rear Mudguard	_
13982		Rear Hub, Super and DG4 sentinels	14.1.32
13983	A	Front Hub	14.1.32
	B	Front Hub	_
13984		Arrangement of Boiler, Funnel and Ashpan Gear	15.1.32
13985		Arrangement and Detail of Frame for DG6 Waggon with Special 20"-0" moving platform	27.1.32
13986	A/B	Tailboard Hinge	15.1.32
	C	Tailboard Hinge Washer Plate	_
	D	Tailboard End Protection Plate	_
	E	Extension Support angle	_
	F	Tailboard Centre Washer plate	_
	G	Extension Washer plate	_
	H	Front Mudguard Support LH	_
	J	Tank Baffle Doubling plate	_
13987	A	Arrangement of Headboard of Dg6T Body with 28" hinged sides and 10 1/2" extensions	15.1.32
	B/C	Platform Front Corner angle	_
	D/E	Platform Rear Corner angle	_
	F	Body Side Stanchion	_
	G	Extension Centre Washer plate	_
13988
13989		Rear Mudguard	18.1.32
		Tyre Carrier Stay	_
		Rear Mudguard Bottom Stay	_
	K/L	Rear Mudguard Top Stay	_
	M/N	Mudguard Front Top Stay	_
13990		Rear Mudguard Front Bracket	18.1.32
	C	Rear Mudguard Front Stay	_
	D	Rear Mud Flap	_
	E	Mud Flap Plate	_
	F/G	Headboard Support	_
	H	Headboard Support Washer plate	_
	J	Headboard Stay Bracket	_
	K	Headboard Stay Bracket Washer plate	_
13991	A/B	Spark Arrester Ring	19.1.32
	C	Spark Arrester Gauze	_
	D/E	Arrester Support bracket	_
	F	Funnel Damper	_
13992
13993	A/B	Stud for Twin Wheels without Brake Drums	23.2.32
	C/D	Stud for Single Wheels without Brake Drums	_
	E/F	Conical Nut	_
	G	Locknut	_
	H/J	Stud for Shaft Drive Waggon Rear Wheel Disc	_
13994		Arrangement of Spark Arrester and Damper	20.1.32
13995		Detail of Frame 19ft platform, (special), DG6	12.3.31
13996		Bunker	20.1.31
13997
13998	A	Crankcase Filler Lid	25.1.31
	B	Breather Cap	_
	C	Crankcase Filler Lid	_
	D	Crankcase Filler Boss	_
	E	Splash Guard Top Bracket	_
	F/G	Splash Guard Bracket	_
	H	Crankcase Oil Filler	_
13999	A	Arrangement and Detail of Special Cab, Canopy and Bunker	22.1.32
	B	Bunk Hinge Bracket	_
	C	Modification to Brake and Rev. Gear Bracket 9032A	_
	D	Reversing Lever Quadrant	_
		Reversing Lever Index Plate	_