Drawing No				Description		Date
	13000		Arrangement of Oil Delivery Pipes, 6"x7" engine		1.4.31
	13001	A	Arrangement of Tank Filler, Modications to Tank Bunker and Special Drilling in Water Tank		1.4.31
		B	Tank filling Hole Door		_
		C	Tank Filler		_
		D	Tank Filler Angle Ring		_
		E	Tank Filler Cope Iron		_
	13002		Water Tank, 275 gallons capacity		1.4.31
	13003
	13004		Front Axle Pivot - rear, DG8 waggon		7.4.31
	13005		Front Axle Pivot RH Front, DG8 waggon		2.4.31
	13006	A	Suspension Bracket Pivot Pin		2.4.31
		B	Torque Tube		_
		C	Suspension Bracket Pivot Pin Bush		_
		D	Cross Tube		_
	13007	A	Sandbox Filler Lid		8.4.31
		B	Sandbox Filler Lid Hinge		_
		C/E	Sandbox Filler		_
		D	Sandbox Bottom Plate (loose)		_
		F	Packing plate (ashpan door clip)		_
		G	Pressure Gauge board		_
		H	Pressure Guage plate		_
	13008	A	Arrangement of Headboard for DG8T with 32" hinged sides and 20" fixed extensions		13.4.31
		B/C	Platform Front Corner Angle		_
		D/E	Platform Rear Corner Angle		_
		J/F	Body Side Stanchion		_
		G/H	Extension Rear Support angle		_
	13009	A/B	Side Extension Top Stiffening angle		15.4.31
		C	Side Extension Bottom Stiffening angle		_
	13010	A	Oil Delivery Pipe - Gear Box End		2.4.31
		B	Oil Delivery Pipe - Centre		_
		C	Oil Delivery Pipe - Pump End		_
		D	Special Coupling Nipple		_
		E	Suspension Link Palm		_
	13011		Arrangement and Detail of Bunker Lid		7.4.31
		F	Tank Filler Stiffening plate		_
		G/L	Boiler Support Angle		_
		H	Filter Pad		_
		K/J	Boiler Support angle		_
	13012
	13013	A	Spark Arrester Casing		28.5.31
		B	Spark Baffle Plate (bottom)		_
		C	Spark Baffle Plate (centre)		_
		D	Spark Baffle Plate (top)		_
		E	Spark Baffle Plate bolt		_
	13014		Steering Gear Casing		7.4.31
	13015		Sandbox		7.4.31
	13016	A/B	Brake cylinder, Pneu. Tyred waggon - job no.998		7.4.31
		C	Brake Cylinder bridge		_
	13017	A	Wheel and type		2.8.46
			Wheel and type		_
	13018	A	Sand valve		8.4.31
		B	Sand valve Spindle		_
		C	Control lever quadrant		_
		D	Control Lever Bracket		_
		E	Globe V. Support Bracket (oil Fuel gear)		_
		F	Sandbox Connecting Rod plug		_
		G	Blow Down Valve Spindle Coupling		_
		H	Blow Down Valve extension Spindle		_
	13019	A/E	Joint Ring		8.4.31
		B	Funnel damper Boss		_
		G	Funnel Damper Locating clip		_
		C	Spark Arrester Support Bracket		_
		D	Spark Arrester Doubling plate		_
		F	Funnel Damper		_
	13020		Arrangement of Spart Arrester (mark II), CANCELLED?		17.4.31
	13021		Steering Drop Lever		18.11.31
	13022	A	Bogie Axle, DG6 Pneumatic tyred waggon
		B	Roller bearing Adjusting Washer		_
		C	Roller Bearing Adjusting Washer		_
		D/E	Key for Roller Bearing Adjusting washer		_
	13023	A	Layshaft Spur Pinion		16.4.31
		B	Layshaft Spur Wheel		_
		C	Crankcase Pinion		_
		D	Sliding Gear		_
	13024	A	Spur Ring, epiccyclic gear box		28.6.31
		B	Crankshaft Pinion		_
		C/D	Plant Pinion		_
	13025	A	Bogie Spring, DG6 on pneumatic tyres		9.4.31
		B	Front Spring, DG8		_
		C	Front Spring		_
		D/E	Bogie Spring		_
	13026		21/4" Bore Cast Steel Stop Valve for Superheater Steam		30.4.31
	13027		Arrangement of 18"-0" Flat platform		9.4.31
	13028	A/B	Corner Plates		9.4.31
		C/N	Headboard Knee		_
		D/L	Floor Gap Cover angle		_
		E	Rear Mudguard Support (rear end)		_
		F	Headboard Knee		_
		J/K	Corner plate		_
		G/H	Corner plates		_
		M	Cross Bearer Strengthening plate		_
	13029		Running Instruction plate, black letters on white enamel ground		10.4.31
	13030	A	Operating Rod Support (outside)		10.4.31
		B	Catch Bar Short Operating Rod end		_
		C/D	Catch Bar Operating Rod		_
		E/F/G	Operating Rod Lever		_
		H	Operating Rod Lever Fulcrum Bracket		_
		J	Operating Rod Lever Fulcrum pin		_
	13031		Arrangement of Boiler showing Position of Fittings (boiler 12922)		10.4.31
	13032		Arrangement of Superheater Coils		29.4.31
	13033		Gear Box
	13034		Arrangement of Rear Door Catch		13.4.31
	13035	A	Diff Shaft Washer Housing		15.4.31
		B	Diff Shaft Washer		_
		C	Diff Shaft Washer Clip		_
		D	Diff shaft Washer Retaining ring		_
		E	Driving Flange Cover plate		_
		F	Driving Flange Bolt		_
	13036	A	Corner Angle Stay Channel		13.4.31
		B	Opening Lever rest Bracket		_
		C/D	Stay Channel Gusset		_
		F	Tailboard Opening Lever Stop		_
		G	Tailboard Hinge		_
		H/J	Tailboard Washer plate		_
		K	Tailboard Hinge eyebolt		_
	13037		Superheater Coil - Inner, geared car		11.4.31
	13038		Superheater Coil - Outer		13.4.31
	13039	A	Boiler Top		4.6.31
		B	Boiler Top Lagging Plate		_
		C	Spark Box		_
	13040	A	Centre Washer plate		14.4.31
		B/C	Extension Support Angle(front)		_
		D	Extension Washer plate		_
		E/F	Tailboard Protection plate		_
		G/H	Body Side Protection plate		_
		J	Opening Lever Cotter bolt		_
		K	Hinge bar		_
	13041	A	Driving Shaft(front0		14.4.31
		B	Driving Shaft (rear)		_
		C/F	Layshaft Nut (thick)		_
		D/E	Driving Shaft Nut		_
		F	Driving Shaft Washer, CANCELLED?		_
		G	Driving Shaft Locking washer, CANCELLED?		_
	13042		Arrangement of 200HP Gear Driven Power car		14.4.31
	13043		Sentinel Steam Waggon, Special Low-loading Articulated for india Store department		14.4.31
	13044	A	Rear Tarpaulin Angle Bow Support		15.4.31
		B	Curtain Rail Eye Bolt		_
		C	Tailboard End Cover Plate		_
		D	Curtain Rail Eye Bolt		_
		E/F	Body Rear Corner plate		_
	13045	A	Gear Box End Cover		14.4.31
		B	Layshaft Cover		_
		C	Extension Shaft End Cover		_
	13046		Square Firebox Geared Railcar Boiler		19.1.31
	13046 2nd		Square Firebox Geared Railcar boiler		10.4.37
	13046 3rd		Square Firebox Geared Railcar boiler		10.4.37
	13047	A/B	Tipping Side hinge		15.4.31
		C/G	Tailboard Opening Lever handle		_
		D	Side Stanchion Stay Channel		_
		E/F	Tailboard Opening lever		_
	13048	A/B	Rear Corner Plate		29.4.31
		C/D	Front Corner plate		_
		E	Front Cross Bearer Gusset		_
		F	Vertical Post Knee Iron		_
		K	Door Cope Bar (LH)		_
		L	Door Cope Bar (RH)		_
		G	Door Cope Bar (inside)		_
		H/J	Door Cope Bar (outer)		_
	13049	A	View of Cab Side to be fitted with "Beclawat" Sliding window		15.4.31
		B	View of Cab Door to be fitted with "Quicktho" Winding window		_
	13050	A/B/C/D	Brake Cam, pneumatic tyred 6-wheeler		15.4.31
		E/F/G/H	Brake Cam, pneumatic tyred 6-wheeler		_
	13051		Arrangement and Detail of frame for Special DG8 Three Way Tipping Waggon		16.4.31
	13052		Boiler Top Plate, geared car		15.4.31
	13053	A	Side Stiffener Angle (end)		16.4.31
		B	Side Stiffener Angle (centre)		_
		C	Section thro Body side shewing Fixing or angle to side Stiffener		_
		D	Opening Lever Support angle		_
		E	Tank Strap		_
		F	Tyre Carrier		_
	13054		Gear Casing		15.4.31
	13055		Gear Casing End Cover		22.4.31
	13056	A	Chip Shield		17.4.31
		B	Rear Axle Casing cover		_
		C/G	Rear Axle Casing Oil Trough		_
		D	Thrust Bearing Housing shim		_
		E	Spring Shackle Pin		_
		F	Shackle Pin Cotter pin		_
		H	Rear Axle Casing Side Cover		_
		J	Rear Axle Casing Top Cover		_
	13057	A/B	Body Side Stiffening Angle (bottom)		17.4.31
		C/D	Body Side Stiffening Angle(top)		_
		E	Catch Bar Guide plate		_
		F	Extension Centre Washer plate		_
		G	Extension Washer plate		_
		H	Opening Lever Base plate		_
	13058	A	Toolbox, BAM power car		16.4.31
		B/C	Toolbox, Kangra Vally Rly		_
	13059		DG8 Tipping Platform Frame		17.4.31
	13060	A/B	Bulb Angle Cleat		7.4.31
		C/D	Bulb Angle Cleat		_
		E	Crosshead Channel Cleat		_
		G	Cross Bulb Angle Cleat		_
		H	Bulb Angle Stay		_
		J	Bulb Angle Stay Cleat		_
		K/F	Bulb Angle Stay Cleat		_
		L/M	Side and Rear Bulb Angle Cleat		_
	13061	A	Hand Brake Lever (rear)		18.4.31
		B	Steam Brake Lever (rear)		_
		C	Hand Brake Lever (front)		_
		D	Steam Brake lever (front)		_
	13062		Arrangement of Body, job no. 8481		18.4.31
	13063		Mechanical Stoker job. P881, parts required for modification to firegrate
	13064	A	Layshaft		17.4.31
		B	Crankshaft Extension Shaft		_
		C	Layshaft Bearing Housing		_
		D	Chip Shield		_
		E	Chip Shield(extension shaft)		_
		F	Inspection Cover		_
	13065		Rear Footplate DG8 waggon		18.4.31
	13066		Footplate, job no. 8518		18.4.31
	13067		Inner Funnel		20.4.31
			Funnel Outer Casing		_
	13068		Washer Housing Grub Screw		21.4.31
		B	Rear Spring Buckle Bolt		_
		C/L	Diff Crown Wheel Bolt		_
		D	Rear Spring Buckle Bolt Nut		_
		E	Spring Clamp Nut		_
		F	Drain Plug Leather Washer		_
		G	Rear Axle Drain Plug		_
		H	Buckle Bolt Locking plate		_
	13069	A	Stop valve Spindle		20.4.31
		B	Spark Arrester Rear Foot		_
		C/D	Spark Arrester Feet L&RH		_
	13070		Steering Casing, DG8 waggon		21.4.31
	13071	A	Tailboard Stop Bracket		21.4.31
		B	Rear Lamp Bracket stud		_
		C	Rera Lamp Bracket		_
		D	Number Plate support Brackets		_
		E	Scrap View shewing position of Rear Number plate and rear lamp bracket		_
	13072
	13073		Arrangement of DG8 Special Three Way Tipping Body with 32" hinged sides, 20" fixed extensions and 52" hinged tailboard		21.4.31
	13074
	13075		Arrangement of Apron Plate		21.4.31
	13076		Proposed trailer alteration for Noel Bonell Esq
	13077		Arrangement and Detail of Apron plate		22.4.31
	13078	A/G	Development of Apron		4.5.31
		B	Front Stanchion		_
		C/D	Side Stanchion		_
		E	Front Stanchion stiffener		_
		F	Stanchion Packing plate		_
	13079		Arrangement of Kirkstall Cardan Shaft		22.4.31
	13080	A	Arrangement of Headboard		24.4.31
		B/C	Platform Front Corner angle		_
		D/E	Platform Rear Corner angle		_
		F	Body Side Stanchion		_
		G	Side Stanchion knee		_
	13081		Arrangement of Boiler showing position of fittings boiler drg no. 12922		23.4.31
	13082
	13083	A/B	Rear Side Chain Bracket		23.4.31
		C/D	Platform Rear Corner angle		_
		E	Tailboard Opening Lever bracket		_
		F	Catch Bar Operating Rod		_
		G/H	Rear Door Protection plate		_
		J	Catch bar plate		_
		K	Tailboard Catch Bar		_
	13084	A/B	Steam Brake Lever		27.4.31
		C/D/E/F	Engine Side Suspension Bracket		_
	13085		Arrangement of Body DG8 tipper		23.4.31
	13086	A/B	Platform Rear Corner Angle		24.4.31
		C/D	Platform front Corner angle		_
		E	Body Side Stanchion		_
		F	Body Side Stanchion Knee		_
		G/H	Side End Protection Plate		_
		J	Tailboard Protection plate		_
		K/L	Front Side Chain Bracket		_
		M/N	Rear Side Chain Bracket		_
	13087	A	Tailboard Catch Bracket9bottom)		24.4.31
		B	Catch bar Opening bellcrank		_
		C	Catch Bar Opening Lever		_
		D	Boss		_
		E	Side ctach Lever bracket		_
		F/G	Rope Ancher Channel stay		_
	13088		Arrangement of Canopy and Bunkers		21.11.30
	13089	A/B	Platform Rear Corner angle		27.4.31
		C/D	Tailboard Extension Socket		_
		E	Side Extension Stop		_
		F	Extension Hinge		_
		G	Body Side Hinge		_
		H/J	Side End Protection plate		_
		K	Extension Protection plate		_
	13090	A	Brake Piston		27.4.31
		B	Camshaft End Cover - gearbox		_
		C	Spider End Bearing Cover		_
		D	Brake Shoe Locating bracket		_
	13091	A	Clutch Fork		27.4.31
		B	Clutch Fork Die		_
		C	Brake Cylinder Cover		_
		D	Brake Piston Rod Bush, CANCELLED 5.5.31		_
	13092	A	Top Rear Cope bar		28.4.31
		B	Roof Cross Beam Stiffener		_
		C	Bottom Rear Cope Bar		_
		D	Door Flange Angle iron		_
	13093		Arrangement of DG8 Special Three Way Tipping Body with 28" hinged sides , 20" fixed extensions and 52" rear doors(hinged outwards)		27.4.31
	13094	A	Pump Carrying bracket		28.4.31
		B	Steam Trap Centre support		_
		C/D	Steam Trap End Support		_
	13095		Boiler Top plate		28.4.31
	13096	A	Arrangement of Steering Column Support
		B/C	Steering Column Support and cap		_
	13097	A/B	Accumulator Support bracket		29.4.31
		C	Accumulator Support angle		_
		D	Support Angle Bracket		_
	13098	A	Opening Rope Anchor channel		30.4.31
		B/C	Cleat		_
		D/E	Opening Rope Anchor Bracket		_
		F	Arrangement and detail of fixing of opening Rope Anchor channel		_
	13099
	13100	A	Reversing Quadrant		29.4.31
		B	Index Plate(reversing gear)		_
		C/K	Engine Control Rod (centre)		_
		D	Engine Control Rod (front)		_
		E/J	Hand Brake Rod (short)		_
		F	Reversing Lever (inside)		_
		G	Centre Reversing Lever Bracket packing plate		_
		H	Drilling in RH Frame Channel		_
	13101	A	Tailboard Outside Washer plate		30.4.31
		B	Tailboard Inside Washer plate		_
		C	Tailboard Centre Washer plate		_
		D	Tailboard End Protection plate		_
		E	Tailboard End Protection plate		_
		F	Tailboard Outside Washer plate		_
		G/H	Tailboard Hinge		_
		J	Extension Hinge short		_
	13102		Arrangement of Brackets for carrying "Nife" accumulator on DG 8 3 way tipping waggon		30.4.31
	13103	A/B/G/H	Collector pipe, Bengal boiler		1.6.31
		C/D	Collector pipe, 200HP Loco Boiler 12267		_
		E/F	Collector Boiler, 25% LTS Boiler Boiler STD Loco		_
	13104	A	Rear Door Hinge		1.5.31
		B	Hugh Packing piece		_
		C/D	Locking Bolt Guide		_
		E	Locking Bolt Bracket		_
		F/G	Locking bolt		_
		H	Fulcrum Pin plate		_
		J	Door Handle Fulcrum pin		_
	13105	A/H	Brake Piston ring		30.4.31
		B	Brake Piston Rod		_
		C	Clutch Operating Spindle		_
		D	Brake Coupling Rod		_
		E	Brake Cylinder Guide Rod		_
		F	Brake Shoe Locating Plunger		_
		G	Locating Plunger guide		_
	13106	A/B	Body Side Top Stiffening angle		2.5.31
		C/D	Body Side Bottom Stiffening angle		_
		E/F	Body Side Top Stiffening angle		_
		G/H	Body Side Bottom Stiffening angle		_
	13107	A	Funnel Base		1.5.31
		B	Funnel Base		_
	13108	A	Rear Mudguard		1.5.31
		B/L	Mudguard Hinge stay		_
		C	Mudguard Hinge stay boss		_
		D	Mudguard Hinge stay strut		_
		E	Rear Mudguard Fulcrum rod		_
			Fulcrum Rod Distance		_
		J	Rear Mudguard Protection plate		_
		K	Mudguard Stop		_
	13109	A	Crosshead, 6"x7" engine - job P998		1.5.31
		B/C	Crosshead		_
	13110		Side Bottom Cope bar		2.5.31
	13111	A	Adsorber Stop Valve		4.5.31
		B	Steam Trap Check Valve		_
		C/D	C-Condenser and Evaporator Stop valve, D-Float Valve Stop valve		_
		E	Valve Chest Drive Quadrant		_
		F	Valve Chest Drive pin		_
	13112		Boiler Top Inner Cover Plate		2.5.31
	13113	A	Firebox Protection plate		5.5.31
		B	Protection Plate for Boiler Top plate, GC Boiler mark 2 type		_
	13114		Frame for 15"-3" platform, pneumatic tyred waggon		13.5.31
	13115		Arrangement of Tank and Mountings, Kangra vally rly		26.5.31
	13116		Bogie Axle Brake Bracket, conversion of four wheeler waggon to six wheeler		6.5.31
	13117	A	Locknut		5.5.31
		B	Locknut		_
		C	Locknut		_
		D	Grease Shield		_
		E	Crankshaft Pinion Retaining flange		_
		F	Retaining Flange bolt		_
		G	Locknut Wire		_
		H	Retaining ring		_
	13118		Arrangement of Cab and Bunker, DG tractor		5.5.31
	13119		Arrangement of Cab Canopy and Bunkers for DG6 T and DG 4 and DG4T		6.5.31
	13120	A	Steam Brake Cylinder		5.5.31
		B	Steam Brake Cylinder		_
	13121	A	Cab Wing panel		?
		B	Cab Door panel		_
		C/D	Footplate Support		_
		E	Cleat Securing Bunker to Frame		_
		F/H	Cab Door Panel		_
		G	Special Drilling in RH Frame Channel		_
	13122		Additional Drilling in Frame(drg no. SB 1951)?		5.5.31
	13123	A	Front Cross channel		7.5.31
		B	Engine Suspension Cross plate		_
		C	Engine Suspension Channel(rear)		_
		D	Engine Suspension Channel(front)		_
		E	Cross Plate cleat		_
		F	Front Cleat RH		_
		G/K	Engine Suspension Pin Boss		_
		H/J	Spring Bracket clip		_
	13124	A	Steam Brake Cylinder Cover		6.5.31
		B	Steam Brake Cylinder Cover		_
		C	Piston		_
		D	Piston Ring		_
		E	Piston Rod		_
		F	Piston Rod		_
		G	Connecting Rod Bush(small end)		_
		H	Pump Valve Chest Plug Cover plate		_
	13125	A	Scrap Arrangement shewing Fixing of Side Extension Catches to body sides		7.5.31
		B	Body Side Protection plate		_
		C	Side Extension Catch		_
		D	Side Extension Catch Barcket		_
		E/F	Side and Extension Cotter bolt		_
		G	Side and Extension Cotter		_
	13126	A	Bunker Front Cope Iron		7.5.31
		B	Bunker Front and Wing Support		_
		C	Sliding Door Guide		_
		D	Sliding Door		_
		E	Brake Rod Guide		_
		F	Brake Rod Guide bush		_
		G	Reversing Rod Guide		_
		H	Brake Rod Guide		_
	13127		Water Tank (geared car)		29.5.31
	13128		Arrangement of Valve Chest		7.5.31
	13129	A	Front Spring		1.12.32
		B/F	Front Spring packing		_
		C	Front Spring packing		_
		D	Tank Suspension channel		_
		E	Bunker Holding Bracket		_
		G	Front Spring Bracket, SD		_
		H	Front Spring Packing		_
	13130	A/B	Tank Filler Lid		8.5.31
		C	Tank Filler Stiffening plate		_
		D/L/M/N/P	Water Tank Filler, geared car		_
		E	Tank Filler hinge, NOT REQUIRED		_
		F	Tank Strainer		_
		G	Tank Wood Packing		_
		H	Tank Wood Packing(end)		_
	13131		Boiler Baffle plate, geared car boiler mark 2		7.5.31
	13132		Evaporator Protection partition, CANCELLED		8.5.31
	13133	A/B	Boiler Baffle Skirt angle		115.31
			Boiler Top Casing		_
	13134	A	Hand Brake Operating shaft		9.5.31
		B	Reversing Gear Operating shaft		_
		C	Reversing Quadrant		_
		D	Brake Compensating link		_
		E	Gear change Quadrant		_
		F	Reversing Gear Index plate		_
	13135	A	Evaporator Drip Pin, CANCELLED		9.5.31
		B	Drain Pipe		_
		C	Water Trap Pipe		_
		D	Evaporator Support Washer		_
		E	Dowel Cup		_
	13136	A	Back Support plate for auld reducing valve		11.5.31
		B	Packing Piece for auld reducing valve		_
		C	"Auld" Reducing Valve Bracket		_
		D	Pump Suction Flange		_
		E	Pump Delivery Flange		_
		F	Evaporator Partition stay, CANCELLED		_
		G	Evaporator Partition Bracket		_
		H	Pump Stay		_
	13137	A/L	Rear Mudguard Support (rear)		11.5.31
		B/M	Rear Mudguard Support (front)		_
		C/N	Front Mudguard Support RH		_
		P/D	Front Mudguard Support LH		_
		E	Air Filter Bracket		_
		F	Front Mudguard Support angle		_
		H/G	Front Mudguard Front Support bracket		_
			Front Mudguard Rear Support Bracket		_
	13138
	13139		Arrangement of Cab Canopy and bunker		11.5.31
	13140	A/B	Side gap Filling plate		11.5.31
		C	Arrangement shewing Side Gap Filling plates in partition		_
	13141	A	Bunker Front Protector bar		12.5.31
		B	drivers Seat Stay		_
		C/D	Cab Wing Cope bar		_
		E/F	Side Door Cope bar		_
	13142	A	Alterations to Stop Valve Cross bar		12.5.31
		B	Bracket on Stop Valve Crossbar		_
		C	Tank Filler joint		_
		D	Stop Valve Indication plate (spanish)		_
		E	Cover for Stop Valve Bevels(top)		_
		F	Cover for Stop Valve Bevels(bottom)		_
	13143	A	Stewart Speedometer support		12.5.31
		B	Speedmoeter Support 'U' bolt		_
			Angle Cleats		_
		F	Mudguard Support Stiffener		_
		G/H	Stewart Warner M7 Speedometer bracket		_
	13144		Detail of Frame for DG6 19ft Platform		12.5.31
	13145
	13146
	13147	A/B	Trunnion Bracket, G/C boiler, LH and RH		21.9.38
		C/D	Trunnion Clip Bracket		_
		E	Weir Pump Bracket		_
		F/H	Operating Lever		_
		G	Regulator Valve Steady Bar		_
	13148		Arrangement of Boiler Top, geared car(boiler marked II)		28.4.31
	13149		Arrangement of DG4 15"-3" Platform frame
	13150
	13151	A	Tank Carrying block		14.5.31
		B	Tank Strap		_
	13152		Arrangement and detail of frame for Super-Sentinel Rigid Six Wheeler, converted from super-sentinel four-wheeler
	13153		Water Tank, pneu tyred waggon		14.5.31
	13154	A	Tank Front angle		14.5.31
		B	Tank rear Angle		_
	13155		Sentinel Patent Water Tube Boiler		15.5.31
	13156		Alteration to Boiler Shell (2-feet added)		13.5.31
	13157
	13158	A	Boiler Tube (plain)
		B	Boiler Stay Tube		_
		C	Hinge Bracket		_
	13159
	13160	A	Tank Front Plate Stiffening angle		19.5.31
		B/C	Tank Rear Plate Stiffening Angle		_
		D	Tank Strap		_
		E	Tank Support channel		_
	13161	A	Brake cylinder Guide Rod Pin		20.5.31
		B	Retaining Flange Peg		_
			Felt Washer		_
	13162		Water tank		20.5.31
	13163	A	Reversing Quadrant		20.5.31
		B	Index Plate (reversing gear)		_
		C	Reversing lever Shaft		_
		D	Engine Control Rod front		_
		E	Pump Suction and pump Return Pipe Hanger		_
	13164		Piping Arrangement of "Silica-gel" Refrigerator waggon
	13165	A	Rear Draw Bar Bracket (top)		21.5.31
		B	Rear Draw Bar Bracket (bottom)		_
		C	Alteration to Bunker floor		_
		D	Tank Strap		_
		E	Alteration to platform converted "Super-Sentinel" rigid six wheeler		_
		F	rear Bearer Cover plate		_
		G	Water Lifter packing piece		_
	13166	A	Arrangement of Turntable, trailer		21.5.31
		B/C	Turntable Side Channel		_
		D/J	Turntable Rear Cross channel		_
		E/H	Turntable front Cross channel		_
	13167	A	Bell crank Lever stud		20.5.31
		B	Gear Change bell Crank lever		_
		C	Gear Change Lever end		_
		D	Gear Change bell Crank lever		_
	13168		Funnel Base
	13169	A/B	Steam Brake Lever		22.5.31
		C	Brake Cam Bush		_
		D	Cam Spindle Felt Washer ??		_
		E/F/G/H/J/K	Brake cams		_
	13170	A	Gear Box Oil Filler Body, geared car		27.5.31
		B	Gear Box Filler flange		_
		C	Gear Casing Inspection cover		_
	13171
	to		All Files between these numbers appear to be missing
	13339
	13340		Cylinder Head
	13340 2nd		Cylinder Head		5.4.32
	13340 3rd		Cylinder head		5.4.32
	13341
	to		All Files between these numbers appear to be missing