Drawing No				Description		Date
	12000	A	Footbrake Foot lever shaft		19.5.30
		B	Cover plate		_
		C	Tank Suspension channel		_
		D/E	Tank Rear Stop bracket		_
		F	Tank Tie bar		_
		K/L/H/G	Seat Support Angle		_
		J	Wing and Canopy plate		_
	12001		Arrangement of Reduction Gear for double geared loco		10.6.30
	12002		Arrangement of Tractor Footbrake		12.5.30
	12003		Arrangement of reversing Cross - rod and Selector Gear		6.11.30
	12004	A	Radius Rod Socket, DG Tractor, CANCELLED 12.2.32		12.5.30
		B	Radius Rod		_
		C	radius Rod Bracket plate		_
		D	Reversing Gear Coupling Lever		_
	12005	A	Reversing Gear Rod		13.5.30
		B	Gear Change Lever Coupling Rod		_
		C	Reversing Gear Rod(stay)		_
		D	Hand Brake Pull Rod		_
		E	Steam Brake Pull Rod		_
	12006		No.3 Injector Type "HP"
	12007	A	Engine Suspension Tube bracket		13.5.30
		B	Engine Suspension Link		_
		C	Enginje Suspension Tube		_
		D	Engine Suspension Tube Clip		_
	12008		Arrangement of "Sentinel" DG6T waggon fitted with "Blaw-knox" agitator truck body		14.5.30
	12009	A	Control Spindle lever		14.5.30
		B	Gear Operating lever		_
		C	Coupling Lever Bracket		_
		D	Coupling Lever Bracket washer		_
		E	Reversing Rod lever		_
		F	Headboard Cope bar		_
	12010		Arrangement of Wheel and Axle, industrial BE Geared loco with 19T sprockets		14.5.30
	12011		Arrangement of Wheels Axle and Springs		25.4.30
	12012
	12013		Coupling Rods, 150HP geared railcar		14.5.30
	12014	A	Crank Pin - inside axleboxes, 150HP geared railcar - not used		14.5.30
		B	Crank Pin washer - inside axleboxes, not used		_
		C	Crank Pin Bush, 150HP geared railcar		_
		D	Crank Pin Washer - outside axlesboxes		_
		E	Push Rod End		_
	12015
	12016	A	Hand Brake Compensating Link(top)		15.5.30
		B	Hand Brake Compensating Link(bottom)		_
		C	Steam Brake Compensating link(top)		_
		D	Steam Brake Compensating link(bottom)		_
	12017	A	Steam Brake valve Bracket		15.5.30
		B	Vacuum Brake Ejector bracket		_
		C/D	Sand Box Handle block		_
		E/F	Cab Roof Strake		_
	12018
	12019	A	Brake, Gear Change and Reversing Gear Bracket packing plate		15.5.30
		B	Brake and Reversing Shaft Bracket packing plate		_
		C	Steam Brake Push Rod		_
		D	Engine Suspension Rod, CANCELLED, never used - 20.5.30		_
		E	Steam Brake Cylinder Packing plate		_
		F	Steam Brake Cylinder		_
	12020		Feed Pump Vlave Chest, triple ram pump-six cylinder engine		15.5.30
	12021	A	Centre partition		15.5.30
		B	Centre partition extension		_
		C	Arrangement of Dividing Strips for Cubic Capacity fitted on Inside of tailboard		_
		D	Arrangement of Dividing Strips for Cubic Capacity fitted on Inside of tailboard
	12022
	12023	A	Feed Pump Delivery valve Cage		17.5.30
		B	Feed Pump Delivery valve stopper		_
		C	Feed Pump Air vessel adapter		_
		D	Feed Pump Valve chest plug		_
		E	Feed Pump Suction valve		_
		F	Feed Pump camshaft gland cover		_
		G	Feed Pump Camshaft Chain end		_
		H	Valve Chest End Cover		_
	12024	A	Foot Lever Bracket		1.6.30
		B	Release Valve Chest		_
		C	Release Valve Chest		_
		D	Stop Valve Seat		_
		E	Stop Valve		_
		F	Stop valve Spindle		_
		G	Stop Valve Spindle gland		_
	12025
	12026	A	2 Ton Loading Weight, loco		19.5.30
		B	Tank Internal Suction Pipe socket		_
		C	Tank Stiffening Ring		_
	12027
	12028	A	Foot Lever
		B	Release Valve Spring Washer		_
		C	Auxiliary Valve Seat		_
		D	Drain valve lever		_
	12029
	12030
	12031		Arrangement od Driving Wheels and Axle
	12032		Arrangement od Driving Wheels and Axle
	12033		Driving Wheel Centre,150HP geared railcar
	12034	A/F	Feed Pump Eccentric Strap		20.5.30
		B	Triple Ram Pump - Six Cylinder engine		_
		C	Feed Pump Gear Spindle		_
		D	Joint - Pump body		_
		E	Joint - Pump valve chest		_
	12035		Arrangement of Boiler showing Position of fitting		21.5.30
	12036	A	Feed Pump Eccentric sheave		20.5.30
		B	Feed Pump Casing cover		_
		C	Feed Pump Eccentric spindle		_
		D	Feed Pump Casing end cover		_
		E	Feed Pump Oil thrower		_
		F	Feed Pump Ball Race housing		_
	12037	A	Feed Pump Camshaft, triple ram pump - six cylinder engine		20.5.30
		B	Feed Pump Chain Guard		_
		C	Feed Pump Spring bracket		_
		D	Feed Pump Cage retaining spring		_
	12038	A	Worm		19.6.31
		B	Worm Wheel		_
		C	Compressor Spur Wheel		_
		D	Crankshaft Nut		_
		F	Worm Wheel Distance piece		_
		G	Alteration to End of crankshaft		_
	12039		Arrangement of Auxiliary Feed Water Tanks and Special drilling in DG8 frame drg. No.SB 2312A		21.5.30
	12040		Special Pulley for portable 7733		21.5.30
	12041
	12042	A	Joint - Pump Valve Chest end covers		22.5.30
		B	Washer - Pump Valve chest plug		_
		C	Joint - Pump casing end cover		_
		D	Joint - pump casing cover		_
		E	Joint - pump ball race housing		_
		F	Joint - crankcase end bearing cap		_
	12043	A	Reversing Lever		23.5.30
		B	Reversing Lever Quadrant		_
		C/H	Reversing Lever Quadrant bracket		_
		D	Reversing Lever Handle		_
		E	Reversing Quadrant ferrule		_
		F	Index Plate Support (gears)		_
		G	Index plate(gears)		_
	12044		Gear Box Casing - geared car 150HP		22.5.30
	12045	A	Crankpin Washer bolt
		B	Accumulator Cradle Bolt		_
		C	Tipping Bracket bolt(front)		_
		D/N	Steam Brake Push and rod bolt		_
		P/R/L/E	Catch bolt		_
		G	Front Axle Journal Nut Bolt		_
			Tipping Bracket bolt(rear)		_
			Pawl Bolt		_
	12046		Arrangement of Tractor Rera Axle		23.5.30
	12047	A	Spark Arrester casing - never used		26.5.30
		B	Top Spark Baffle plate		_
		C	Middle Spark baffle plate		_
		D	Bottom Spark baffle plate		_
		E	Joint Ring		_
	12048		Sentinel Patent Water Tube Boiler		30.5.30
	12049		Detail of frame for std 20" - 0" platform DG6		26.5.30
	12050	A	Boiler Top		27.5.30
		B	Superheater Steady plate		_
		C	Dynamo Drive Drain pipe		_
	12051		Worm Gear Casing		26.5.30
	12052		Throttle and Release Valve chest, geared railcoach		27.5.30
	12053	A	Arrangement of Lubricator Test Valve Chest		27.5.30
		B	Lubricator Test Valve body		_
		C	Lubricator shut -off valve		_
		D	Lubricator shut -off valve cap		_
		E	Lubricator Test Valve spindle		_
		F	Lubricator Check Valve body		_
		G	Lubricator Check Valve Spring pin		_
		H	Lubricator Test Valve spring handle		_
	12054		Arrangement of Brake, Reversing Gear and Gear changing controls for Double geared tractor		28.5.30
	12055	A	Worm Gear Casing Cover
		B	Worm Gear Casing End Cover		_
		C	Worm gear casing gland cover		_
		D	Worm End Cover		_
		E	Worm Bearing Housing		_
		F	Worm Gland Cover		_
		G	Worm Distance washer		_
	12056
	12057	A	View Showing Special Drilling in Frame and boiler support angle		29.5.30
		B	Compensating Link Guide Bracket		_
		C	Inverted Plan of Winch Plummer Block showing drilling		_
		D	Fulcrum Pin		_
		E	Hand Brake Lever handle		_
	12058	A	Feedheater Cover joint		15.7.30
		B	Double Water Filter Cover joint		_
		C	Double Water Filter joint		_
		D	Internal Suction Pipe joint		_
		E	Lubricator Body Cover joint		_
	12059		Gear Box Casing, geared car 150HP		29.5.30
	12060		Detail of Frame for Dg6 3-way tipper		11.7.30
	12061		Detail of DG6 Side Tipping waggon frame		7.7.30
	12062		Flat Platform Waggon(15"-3") DG4		22.7.30
	12063		Arrangement and Detail of DG4 three way tipping waggon frame		11.7.30
	12064		Arrangement and Detail of DG4 frame 17" - 0" platform		6.8.30
	12065
	12066		Detail of frame for 21" - 0" platform - DG6		27.6.30
	12067
	12068		Steam and Vacuum Brake Arrangement		29.5.30
	12069		Steam and Exhaust Branch, 150HP geared railcoach		29.5.30
	12070		Unreadable ????		17.6.30
			Auxiliary ?Valve? ???? Nut		_
		C	Auxiliary Valve Clamp		_
		D/J	Auxiliary Valve Spindle		_
		E	Auxiliary Valve		_
		F	Auxiliary Valve Spindle handle		_
		G	Auxiliary Valve Spindle nut		_
		H	Auxiliary Valve Spindle handle		_
	12071	A	Tailboard Centre Hinge		3.6.30
		B	Tailboard Stiffener		_
		C	Tailboard Protection Plate		_
		D	Rear Corner Plate Top		_
		E/F	Rear Corner Plate (bottom)		_
		G	Tailboard hinge		_
		H	Waggon End Cross Bearer gusset		_
		J	Roof Stiffening plate		_
	12072	A	Gear Casing Bottom Cover, geared railcoach		30.5.30
		B	Pinion Housing Cap		_
		C	Layshaft Housing short		_
	12073	A	Throttle Valve Guide		30.5.30
		B	Throttle Valve Seat		_
		C	Release Valve Seat		_
		D	Throttle Valve		_
		E	Driving Shaft, 150HP geared railcoach		_
		F	Steam Flange		_
		G	Exhaust Pipe Flange		_
	12074		Frame for 15' - 3" platform, pneu tyred waggon		30.5.30
	12075	A	Adapter for Chain Sprocket		31.5.30
		B	Worm Bearing Nut		_
		C	Worm Wheel Bearing nut		_
		D	Driving Shaft bush		_
		E	Driving Shaft bush		_
		F	Driving Shaft Lever		_
		H/G	Driving Shaft Lever pin		_
	12076		Gear Case Pinion Housing, 150HP geared car		31.5.30
	12077	A	Brake Block		2.6.30
		B	Brake Block Pin		_
		C	Brake Block Pin Nut		_
		D	Brake Spindle Collar		_
	12078	A	Connecting Rod		5.6.30
		B	Adjusting Plate Bearing		_
		C	Pawl		_
		D	Ratchet Adjusting Plate		_
		E	Adjusting Plate rod		_
		F	Cross Shaft Bracket Bush		_
	12079		Arrangement of cab with extended Bunker		2.6.30
	12080	A/B	Stiffening angle (inside)		4.6.30
		C/D	Hinge Stop Plate		_
		E	Headboard plate		_
		F	Details of Drilling in Frame for Tailboard Stop brackets		_
		G	Gauge Rod washer		_
		H	Arrangement of Tank Water Level gauge		_
		J	Engine Control Rod(front)		_
	12081		Arrangement of Cab, Canopy and bunker		5.12.30
	12082	A	Engine Cross channel(rear)		3.6.30
		B	Engine Cross Channel(front)		_
		C	Front Cross channel		_
		D	Front RH cleat		_
		E	Engine Suspension cleat		_
		G	Diagonal Stay Cleat		_
		F	Diagonal Frame stay		_
	12083		Water Tank, pneu tyred waggon		25.6.30
	12084	A	Driving bevel Nut		6.6.30
		B/L	Front Wheel Brake Lever		_
		H/C	Steam Brake Link Bracket		_
		D/J	Steam Brake Link		_
		E/K	Front Brake Rear Rod		_
		F	Front Brake Lever Adaptor		_
		G	Front Brake Shaft		_
	12085	A	Feed Pump Body		20.5.30
		B	Feed Pump Body Cover		_
		C	Feed Pump Ball Race washer		_
	12086	A/B/C	Pinion Housing Shim		4.6.30
		D	Driving Shaft Oil Seal Ring		_
		E	Layshaft Housing Shim		_
		H	Driving Shaft Bearing washer		_
		J	Driving Bevel Locknut plate		_
	12087		Spare tyre Carrier		11.5.30
	12088	A	Tyre Carrier Wheel		16.6.30
		B	Spare Tyre Carrier clip		_
		C	Tyre Carrier Screw Nut		_
		D	Tyre Carrier Screw		_
		E	Tyre Carrier Screw Hand Wheel		_
		F	Tyre Carrier Screw Bearing Cap		_
		G	Tyre carrier Screw Bearing		_
	12089	A	Universal Coupling Outer Ring		4.6.30
		B	Universal Coupling Fork		_
	12090		Exhaust Steam Pipe, geared car		5.6.30
	12091	A	Driving Shaft Nut		4.6.30
		B	Driving Bevel Locknut		_
			Rear Spring 'U' Bolt nut		_
		F	Rear Spring Buckle bolt nut		_
		C	Double Ended Lever nut		_
		D	Grease Nipple cap		_
		G	Front Spring Buckle Bolt Nut		_
		H	Rear Spring Buckle bolt nut		_
	12092		Arrangement of Stewart Speedometer Drive for Sentinel Pneumatic Tyred waggon		5.6.30
	12093	A	Steering Drop Lever		9.6.30
		B/F	Reversing Lever End		_
		C	Hand Brake lever end		_
		D	Hand Brake lever end		_
		E	Reversing Gear lever		_
	12094		Arrangement of "Super-Sentinel" end tipping waggon for refuse collecting		5.6.30
	12095		Arrangement of Boiler and Mountings, LNER crane loco		6.5.30
	12096
	12097	A	Steering Gear Ball		12.6.30
		B	Hand brake lever Quadrant		_
		C	Hand brake Lever handle		_
		D/G	Reversing Lever handle		_
		E	Push Rod Top		_
		F	Push Rod bottom		_
	12098		Arrangement of Footplate for Pneu tyred 4 wheeler		29.11.30
	12099		Crankshaft Extension
	12100		Footplate		10.11.30
	12101	A/D	Brake and Reversing Gear Bracket		4.6.30
		B	Hand Brake Operating shaft		_
		C	Reversing Gear Operating shaft		_
	12102		Arrangement of Valve settings Inicator Plate and instructions for Marking Cardan Shaft disc		6.6.30
	12103	A	Valve Setting Indicator Plate		6.6.30
		B	Valve Setting Indicator plate		_
		C	Valve Setting Indicator plate		_
	12104		Arrangement of Engine, LNER crane loco		10.5.30
	12105		Arrangement of Feed Pump, LNER crane loco		10.5.30
	12106
	12107	A	Chain Stanchion		11.6.30
		B/C/D/E	Cross Cahin		_
		F/G/H	Side Rail Shoe		_
		J	Stanchion Socket		_
		L/K	Floor Sprocket angle		_
		M	Jockey Pulley Bracket		_
	12108		Sentinel Patent Water Tube Boiler, DG waggon		19.6.30
	12109	A/B	Steam Pipe		10.6.30
		C	Tipping Piston Rod, CANCELLED 22.3.32		_
		D	Intermediate Spur Centre		_
	12110		Arrangement and detail of Box Van body fitted with side and rear lock-up doors		11.6.30
	12111	A	Push Rod		19.6.30
		B	Reversing Lever Ball Socket		_
		C	Rear Brake Lever Shackle		_
		D	Reversing Quadrant		_
		E	Reversing Gear Index plate		_
		F/K	Fulcrum Pin Bracket		_
		P/L/G	Connecting link		_
		H	Connecting link shackle		_
	12112	A	Arrangement of 24 tailboard Specially hinged Flush with Height of sides		11.6.30
		B/C	Platform Rear Corner Corner angle		_
		D	Tailboard Protection plate, CANCELLED 12.6.30		_
		E	Tailboard Outside washer plate, CANCELLED 12.6.30		_
		F	Tailboard Inside washer plate, CANCELLED 12.6.30		_
		G	Tailboard catch Bracket		_
	12113	A	Eye Bolt		12.6.30
		B	Eye Bolt		_
		C	Rear Door Fixing Hook		_
		D	Side Door Protection bar		_
		E	Steering Wheel		_
	12114	A/J	Arrangement of Headboard fitted to Standard 17'-0' x 7'-0 34/', 15'-3x7'-0 3/4' platform		14.6.30
		B/H	Headboard Stay		_
		C	Headboard Outside Cope bar		_
		D	Headboard Cope bar		_
		E	Trailer Headboard Cope bar		_
		F	Headboard Inside centre Cope bar		_
		G	Headboard Outside Centre cope bar		_
	12115		Arrangement of 22'-0' platform fitted stanchions and chains		13.6.30
	12116	A	Brake Pull Rod End Cover		13.6.30
		D	Clinker Shovel		_
		E	Fire Shovel		_
		B/C	Sand Pipe Clip		_
	12117	A	Tyre Carrier Screw Ball		16.6.30
		B	Hand Wheel Stop		_
		C	Spare Tyre Support bracket		_
		D	Dynamo Driving Chain Mud Guard		_
	12118		Arrangement of Water Tube Boiler - type 2
	12119	A	Layshaft Spur		13.6.30
		B	Axle Spur, 150HP geared railcoach		_
		C	Layshaft Spur		_
		D	Axle Spur, 150HP geared railcoach		_
	12120	A	Layshaft spur		16.6.30
		B	Axle Spur		_
		C	Layshaft spur		_
		D	Axle Spur		_
	12121	A	Layshaft Spur		18.6.30
		B	Axle Spur		_
	12122	A	Footplate LH		11.11.30
		B	Footplate Side Stay		_
		C	Footplate Front Stay		_
		D	Footplate RH		_
	12123	A	Boiler Top Cleading Ring		16.7.31
		B	Boiler Top Cleading Ring		_
	12124	A	Brake Cylinder Cover		16.3.33
		B	Brake Cylinder Cover Bush		_
			Brake Cylinder Cover bush		_
		C	Tank Mudguard Cover		_
	12125	A	Inspectors Boiler Nameplate		17.6.30
		B	Reversing Quadrant Index plate		_
		C	Pump Valve Lever Instruction plate		_
		D	Injector Lifting Nozzle nameplate		_
		F	Whistle Valve nameplate		_
		H	Pump valve nameplate		_
		E	Engine Drain Valve Nameplate		_
		G	Instruction plate, oil fired geared car		_
	12126	A	Layshaft Bevel
		B	Driving Bevel		_
	12127	A	Layshaft Bevel
		B	Driving Bevel		_
	12128	A	Apron Plate		17.6.30
		B	Apron Plate Base Angle, pneu tyred waggon		_
		C/D	Cab Wing Bottom Cope Iron		_
		E/F	Cab Door Bottom Cope iron		_
	12129
	12130		Arrangement of Accumulator Brackets to carry "Nife" accumulator, DG8 waggon		19.6.30
	12131	A	"Nife" Accumulator Box, DG8 waggon		19.6.30
		B	Lid Fixing Bracket		_
		C	Eye Bolt		_
		D	Spark Arrester Bottom plate		_
	12132	A	Boiler Top		16.7.30
		B	Boiler Top		_
	12133		Arrangement of Reduction Gear for Double Geared loco,crane loco		?.7.29
	12134	A	Arrangement of Headboard on standard 20'-0' platform		20.6.30
		B	Headboard Stay		_
		C/D	Headboard Support		_
		E/F	Headboard Centre Cope bar		_
		G/H	Headboard End Cope bar		_
	12135	A	Arrangement and Detail of Engine Suspension Channel for DG6T 13'-7 7/8' wheelbase fitted with new engine		8.7.30
		B	Spark Discahrge Pipe		_
		C	Canopy Protection Ring		_
		D	Canopy Flame Guard		_
	12136
	12137		Rear Spring Bracket pin		20.6.30
			Front Spring Bracket pin		_
			front Spring Bracket Stay bar		_
			Front Spring Bracket Stay tube		_
		E	Rear Spring Bracket Distance Piece bolt		_
		F	Spring Bracket clip		_
			Front Drawbar Bracket		_
		R/Q	Diagonal Frame Stay		_
	12138	A	Apron Plate Stiffener		30.6.30
		B	Feed Pump Ram Plug		_
		C	Filter Body Packing piece		_
		D	Spark Discharge Pipe		_
		E	Spark Discahrge Pipe flange		_
		F	Discharge Pipe Flange lid		_
		H	Stud		_
		G	Discharge Pipe Flange Lid Bush		_
	12139	A	Oil Feed Pipe
		B	Oil Pipe - Crankcase End bearing		_
	12140	A	Front Stanchion		3.12.30
		B/C	Side Stanchion		_
		D/E	Side Stanchion Stiffener		_
		F	Front Stanchion Stiffener		_
		G	Bunker Holding Down Foot		_
		H	Drivers Seat Stay		_
	12141	A	Adjusting Plate Cross Shaft		20.6.30
		B	Cross Shaft Lever		_
		C	Cross Shaft Lever pin		_
		D	Control Rod		_
		E	Overflow Pipe		_
		F	Suction and Delivery Valve Nipple		_
		G	Algor Pump Ball Valve		_
					_
	12142	A	Roller Bearing Nut		21.6.30
		B	Rear lamp Bracket		_
		C/D	Rubbing Plate, CANCELLED 16.7.30		_
		E	Front Number Plate		_
		F	Front Number Plate support		_
		G	Rear Cover Stay on Rear Mudguard		_
		H	Steering Arm RH		_
	12143	A	Control Box Top Cover		20.6.30
		B	Control Spindle		_
		C	Control Spindle Top Lever		_
		D	Control Spindle Lever		_
		E	Throttle Valve Carrying plate		_
	12144	A	Engine Suspension Bar (front)
		B	Engine Suspension Bar (rear)		_
	12145
	12146	A	Gear Change Lever end		23.6.30
		B	Gear Change Bell Crank Lever		_
		C	Gear Change Quadrant		_
		D	Gear Change Lever clip		_
		E	Push Rod Bottom		_
		G/F	Gear Change Lever handle		_
	12147		Front Lower Side panel		24.6.30
	12148	A	Stop valve Spindle		25.6.30
		B	Stop valve Gland Set Pin		_
		C	Tank Cross Support Plate		_
		D	Trunnion Quadrant		_
		E	Trunnion Lever		_
		F	Tool Box Knee		_
		G	Fulcrum Pin Nut		_
		H	Special Washout plug		_
	12149		Winch Drum(winch without bollard), tractor		24.6.30
	12150	A	Compressor Support		7.7.30
		B	Packing Strip		_
		C	Support Channel Rear		_
		D	Support Channel Front		_
		E	Details of Drilling (for holding down brackets) in frame drg no. 11356		_
		F	Wire Rope Clamp Plate, CANCELLED?		_
		G	Tank Support Packing plate		_
	12151	A	Tail Lamp Bracket		24.6.30
		B	Rear Number Plate Support		_
		C	Rear Number Plate Support		_
		D	Water Gauge Control Nipple		_
		E	Water Level Gauge cap		_
		F	Water Level Gauge Rod		_
		G	Water Level Gauge Float		_
	12152		Plan of Boiler Top, shewing position of boiler mountings		25.6.30
	12153		Windscreen for pneu tyred waggon		14.11.30
	12154		Arrangement of Westinghouse Type F 4" - 6"/10 5/16" Air Compressor ON Sentinel DG6 22"-0" Platform waggon		7.7.30
	12155		Vertical Roller stay		26.6.30
	12156	A	Fire Door Air vent Arrangement		26.6.30
		B	Pipe		_
		C	1 1/2" Le Bas Elbow np.90		_
		D	Nipple		_
		E	Adapter		_
		H	Regulator Plate handle		_
		F	Flange		_
		G	Regulator Plate		_
	12157	A/B	Water Filter Body		26.6.30
		C/D	Steering Coupling Rod end		_
	12158	A	Roller Bracket		26.6.30
		B	Vertical Roller spindle		_
		C	Horizontal Roller		_
		D	Horizontal Roller spindle		_
		E	Arrangement of Socketed Headboard fitted to Standard DG6 3 Way Tipping body 10118A		_
		F	Headboard Support		_
	12159		Arrangement of Roller Gear, DG tractor		26.6.30
	12160
	12161		Sentinel Patent Washer Tube Boiler, Working Pressure 255 LBS per sq inch		4.7.30
	12162	A	Pump Plunger		30.6.30
		B/C	Pump Spindle		_
		D	Arrangement of Tipping Pump and operating gear, 3 way tipping trailor		_
		E	Pump Casing Cover		_
		F	Pump Cylinder		_
		G/H	Pump Spindle		_
	12163		Arrangement of 22"-0" waggon platform for Rigid Six Wheeler		12.7.24
	12164
	12165	A	Pump handle		28.6.30
		B	Pump Gland nut		_
		C	Pump Leather Washer		_
		D	Pump Barrel		_
		E	Pump rod Guide		_
		F	Joint Ring		_
		G	Pump Rod		_
		H	Non Return Valve Grub screw		_
	12166		Arrangement of Damper Gear		30.6.30
	12167	A	Brake Pawl Push Rod		2.7.30
		B	Water Lifter Packing plate		_
		C	Detail of Holes in DG Tractor Frame(DRG11933) for rear lamp bracket		_
		D	Spring Slipper plate		_
	12168		Fly Crank		1.7.30
	12169	A	Pump Valve Operating Lever Quadrant, triple Ram Pump - six cylinder engine		2.7.30
		B	Pump Valve Operating Lever Quadrant, triple Ram Pump - six cylinder engine		_
		C	Pump Valve Operating chain		_
	12170	A	Blank for Gears to drg 12170 D&E		4.7.30
		B	High Gear Pinion (driven)		_
		C	High Gear Pinion(driven)		_
		D	High Gear Wheel (driver)		_
		E	High Gear Wheel(driver)		_
	12171	A	Grease Nipple Body		23.7.30
		B	Grease Nipple Spring Retainer		_
		C	Tipping Cylinder Coupling nipple		_
		D	Y piece for Steam Brake Connection		_
		E/L	3/8" to 1/2" Coupling nipple		_
		F	1" TO 1/2" Coupling nipple		_
		G/J/K	Special Nipple for Water Filter body		_
		H	1" to 1 1/2" adapter		_
	12172
	12173	A	Crankcase End bearing Cap, 150HP geared railcoach		3.7.30
		B	Crankcase End Bearing bush		_
		C	Crankshaft Oil Thrower		_
		D	Oil Thrower spring		_
	12174	A	Teclamit Grease Nipple adaptor		7.7.30
		B	Gear Change Rod End		_
		C	Compensating Link Guide		_
		D	Compensating Link Guide stay		_
		E/H	Rear Brake Rod end		_
		G	Byepass Valve Pulley Bracket		_
		K/J/F	Hand brake Forward rod		_
	12175
	12176		Arrangement of Brake Reversing and Gear Change Controls for Pneumatic tyred waggon		1.11.30
	12177		Arrangement of Duplex Lubricator for DG Waggon Front Axle pivots		3.10.30
	12178
	12179		Arrangement of "Sentinel" end tipping waggon (to be fitted with 'weeks' 100 gallon Tar and Tarfroid spraying plant) showing projections on body bearers		18.7.30
	12180	A	Undertype Winch Shaft		8.7.30
		B	Flywheel(LH wheel), undertype winch, CANCELLED - never used		_
		C	Winch Shaft Collar		_
	12181		Feed Heater Branch Pipe, 150HP geared railcoach		8.7.30
	12182
	12183	A	Rear Mudguard		9.7.30
		B	Front Mudguard		_
		C	Rear Mudguard Stay		_
		D/E	Front Mudguard Support		_
		F	Front Mudguard Stay		_
		G	Front Wheel Brake Rod(long)		_
	12184		Arrangement of Cardan Shaft Drive and Torque stay gear, 150HP geared car		9.7.30
	12185		Arrangement of Steam Brake fitted to "Super-Sentinel"		9.7.30
	12186		Arrangement of Steam Brake fitted to "Super-Sentinel" three way tipping waggon		9.7.30
	12187	A	Steam Brake Cylinder lagging		9.7.30
		B	Steam Brake Cylinder Cleading		_
		C	Drivers Footrest		_
		D	Drivers Footrest Support		_
	12188		Arrangement od Double Water Filter		10.7.30
	12189		Crankcase End Bearing, 150HP geared bearing		3.7.30
	12190		Arrangement of Driving Wheels and Axle		11.7.30
	12191		Arrangement of driven Wheels and Axle		11.7.30
	12192		Wheel Centre		18.7.30
	12193
	12194
	12195
	12196
	12197
	12198
	12199	A	Double Water Filter Body, loco		14.7.30
			Water Filter Cover		_
	12200		Arrangement of Steam and Exhaust Piping on pneumatic tyred waggon		13.12.30
	12200 2nd		Arrangement of Steam and Exhaust Piping on pneumatic tyred waggon		16.7.30
	12201		Arrangement of Short Venturi Funnel with combined blast and blower pipe, DG waggons		15.7.30
	12202		Arrangement of Gulley Cleaning and Sealing Tanks fitted on "Super-Sentinel" 13"-6" chassis		15.7.30
	12203
	12204
	12205	A/C	Draw Bar Bracket pin		6.9.30
		B	Side Extension Socket(centre)		_
		D	Stop Valve Chest Guard		_
		E	Side extension Socket(centre)		_
		F	Side Support		_
	12206
	12207	A/B	Dynamo Cover		19.7.30
		C	Filler Cap		_
		D	Filler cap Anchor pin		_
		E	Filler Cap Spring clip		_
		F	Filler Cap Safety Chain		_
		G	Filler Cap Joint Ring		_
		H	Dynamo Casing Drain Deflector		_
	12208	A	Arrangement of Headboard (3"-6" high) of Body with 20" sides for DG4ST		21.7.30
		B/C	Platform Front Corner angle		_
		D	Tailboard End protection plate		_
		E	Side End Protection plate		_
		F	Side Support Washer plate		_
	12209	A	Byepass Pulley Bracket(canopy)		28.10.30
		B	Byepass Pulley Bracket(frame)		_
		C	Steam Brake Cylinder Bracket		_
		D	Gear Change Quadrant		_
		E/G/J	Hand Brake Rear Rod		_
		F/H/K	Steam Brake Rear Rod		_
	12210	A	17T Axle Sprocket
		B	15T Countershaft Pinion		_
		C	Axle Sprocket Cover plate		_
		D	Arrangement shewing Sprocket Mounted on wheel		_
	12211		Section Through Front and Rear Wheels of 3 -4 ton trailer		21.7.30
	12212		Arrangement of Venturi Funnel and Spark Arrester		22.7.30
	12213	A	Jockey Sprocket Cover plate		23.7.30
		B	Jockey Sprocket Distance piece		_
		C	Bearing Distance Piece(outer)		_
		D	Bearing Distance Piece(inner)		_
		E	Jockey Sprocket Spindle		_
		F	Jockey Sprocket Support bracket		_
		G	Jockey Sprocket Support bracket(rear)		_
	12214	A	Quadrant Plate, mechanical stoker		22.7.30
		B	Handle		_
		C	Stud for Handle		_
		D	Bunker Jamb Rod bracket		_
		E	Bunker Jamb Rod		_
		F	Bunker Jamb Rod handle		_
	12215	A	Arrangement of Side Driving Chain Jockey sprocket		24.7.30
		B	Arrangement of Rear Driving Chain Jockey sprocket		_
	12216	A	Jockey Sprocket Spindle		24.7.30
		B	Jockey Sprocket		_
		C	Jockey Sprocket Cover		_
		D	Dust Ring		_
		E	Bearing Distance Piece		_
		F	Eccentric Housing dog		_
	12217		Eccentric Housing Bracket		23.7.30
	12218		Eccentric Housing		24.7.30
	12219		Arrangement of Throttle and Release Valve Chest, for 150HP single engined geared car		23.10.30
	12220		Arrangement of Jockey Sprocket and Mountings, 6-wheeled DE Loco		25.3.30
	12221		Cylinder Block		8.8.30
	12222		Cylinder head		5.8.30
	12223		Arrangement of Tipping Body with 36" hinged sides and tailboard to be fitted to "Foden" waggon		25.7.30
	12224		Preliminary Arrangement of Boiler Compartment
	12225		Arrangement of Trailor fitted with pneumatic tyres to carry a Distributed load of 2 ton 10 CWTS		28.7.30
	12226	A	Algor Tank		6.8.30
		B	Algor tank cover		_
		C	Algor Tank Bracket		_
	12227	A	Quadrant		29.7.30
		B	Plunger Box		_
		C	Plunger		_
		D	Stud		_
	12228		Arrangement of Funnel and Boiler Top Cover		29.7.30
	12229
	12230		Arrangement of Sentinel 4-ton Trailer		30.7.30
	12231		Arrangement of Sentinel 5-ton Trailer		30.7.30
	12232		Arrangement of "Sentinel" 7 ton trailer fitted eith 40" x 10" pneumatic tyres		30.7.30
	12232 2nd		Arrangement of "Sentinel" 10 ton trailer fitted eith 40" x 10" pneumatic tyres		30.7.30
	12233		Arrangement shewing Extensions fitted to Tractor Rear Wheels(drg no.6041)		31.7.30
	12234	A	Rear Wheel Extension Inner angle		31.7.30
		B	Extension Outer angle		_
		C	Rear Wheel Extension ring		_
	12235	A	Arrangement of headboard of body with special 361/4" sides		30.7.30
		B/C	Platform Front Corner angle		_
		D/E	Platform Rear Corner angle		_
		F	Body Side Stanchion		_
		G	Side and tailboard Extension Socket		_
	12236		Arrangement of Ashpan and Firegrate		30.7.30
	12237	A	Special Countershaft		30.7.30
		B	Special Countershaft Sprocket		_
	12238	A	Arrangement of Steam Control Valve, 100HP Oil Fired Geared Car		1.8.30
		B	Arrangement of Steam Distribution Valve, oil fired railcars		_
	12239		Outline Arrangement of Tractor		1.8.30
	12240		Arrangement of Double Check Valve Baffle Plates, 100HP Oil Fired Boiler		1.8.30
	12241	A	Vertical Roller Stay		6.8.30
		B/C	Rollers		_
		D/E	Horizontal Roller Spindle		_
		F	Tractor Chain Wheel Locating plate		_
		G	Special Camfollower End		_
	12242		Arrangement of 100HP Oil Fired boiler
	12243	A	Steam Branch		6.8.30
		B	Exhaust Branch		_
	12244		Tank Frame(tractor)		6.8.30
	12245	A	Canopy Leg Support Gusset		8.8.30
		B/C	Rear Support Gusset		_
		G	Tank Strap		_
		D	Rear Support Gusset Packing piece		_
		E/F	Rear Top Gusset plate		_
		H	Tank Block		_
	12246		Water Tank - 350 gallons		11.8.30
	12247		Arrangement of Winch Roller Gear DG tractor		6.8.30
	12248	A	Steering Drop Lever		8.8.30
		B	Steering Arm RH		_
		C	Steering Column		_
		D	Steering Spindle		_
	12249	A/B	Regulator Rod Support		8.8.30
		C	Regulator Rod Support Plate		_
		D/E	Distance Piece		_
		F	Brake Pointer		_
		G	Regulator Pointer		_
		J	Regulator Rod Support Stay		_
		H	Regulator and Brake Indicator plate		_
		K	Front Engine Support stay		_