11250	A	Rocking Firegrate Bellcrank Lever	1.7.29
	B/H	Bell crank Lever bracket	_
	C/K	Rocking Grate Lever	_
	D	Spring Stop Bracket	_
	E	Plinger for Spring Stop Bracket	_
	F	Distance Piece for Bell Crank Lever	_
	G/L	Firegrate Lifting Lever	_
	J	Ashpan Lifting Bracket	_
11251	A	Buffer Bridle	8.7.29
	B	Front Buffer Beam Angle (top)	_
	C	Front Buffer Beam Angle (bottom)	_
	D	Rear Buffer Beam Angle(top)	_
	E	Rear Buffer Beam Angle(bottom)	_
	F/G/H/J	Buffer Beam Stiffening Angle	_
11252	A	Spark Arrester	2.7.29
	B	Spark Arrester Ring	_
	C	Spark Arrester Support Bracket	_
	D	Funnel Damper	_
	E	Arrangement of Spark Arrester fitted on 'super-sentinel' funnel	_
11253	A/C	Exhaust Pipe, 6 3/3"x7" - six cylinder engine	2.7.29
	B	Exhaust Pipe and Bend, 6 3/3"x7" - six cylinder engine	_
11254		Details of Water Tank for DG6 Tipping waggon	2.7.29
11255		Sanding Arrangement 6 or 4 wheel loco	8.7.29
11256		Accumulator Box	10.7.29
11257		Footplate for BE Loco	4.7.29
11258	A	Half Plan View	16.7.29
	B/C	Roof Protection Plate	_
	D	Spark Arrester	_
	E/G	Spark Arrester Support	_
	F	Spark Collecting Ring	_
11259	A	Side Support Knee	5.7.29
	B/H	Roof Cross Beam Stiffener	_
	C	Rear Door Locking Bolt	_
	D	Tailboard Protection Plate	_
	E	Headboard Plate	_
	F	Tailboard Stiffener	_
	G	Side Extension Socket(centre)	_
11260	A/B	Side Apron Plate	6.7.29
	C	Support for Accumulator Box	_
	D/E	Apron Plate Support - rear	_
	F/J	Door Pillar	_
	G/H	Apron Plate Stiffenung Bars	_
11261		Arrangement of DG6 waggon showing Hoisting gear with Bollard fitted to Crankshaft	4.7.29
11262		Arrangement of Rocking Firegrate Gear, BE Loco	23.7.29
11263		Arrangement showing alteration to oil fuel gear on job 7274	5.7.29
11264		Proposed alteration to Oil Fuel gear on job 7274 using new oil heater and filter	5.7.29
11265	A	Arrangement of Heaboard of Body with Special 41 1/2" sides for DG6 tipping waggons	6.7.29
	B/C	Platform Rear Corner Angle	_
	D/E	Platform Front Corner Angle	_
	H/F	Side Extension Socket(end)	_
	G	Side Extension Socket(centre)	_
11266	A	Stop valve Control Spindle, 200HP oil fired boiler	29.1.30
	B	Reversing Rod Ends	_
	C	Coaling Door Hinge	_
	D	Special Tee Piece(chain lubricator)(DE DG Loco duplex chains)	_
11267		Cope Iron for Side Apron Plates(top)	9.7.29
	C/D	Cope Iron for Side Apron Plates(bottom)	_
	E/F	Side Apron Plate Angle	_
	G	Buffer Beam Angle(top)	_
11268		Cab Arrangement , Barsi light railway, CE Loco	31.8.29
11269		Stop Valve Cover, geared car	8.7.29
11270	A	Piston	8.7.29
	B	Piston Ring	_
	C	Evertyte' Patent Piston Ring(two pin type)	_
11271		Arrangement of Canopy and Apron Plates, BE 4wheel Loco	9.7.29
11272	A	Body Side Stanchion	9.7.29
	B	Body Side Extension Stop	_
	C	Body Side Extension Stiffener	_
	D	Body Side Stiffener	_
	E	Rear Corner Angle Tie bar	_
	F	Side Tank Connection Pipe	_
11273	A/F/G/H	Steam Valve, 6'x7' six cylinder engine	9.7.29
	B	Exhaust Valve	_
	C	Valve Cap Dog	_
	D	Steam valve Cap	_
	E	Exhaust Valve Cap	_
11274	A	Arrangement showing Pilot Burner in Position, oil fuel gear	9.7.29
	B	Arrangement of Pilot Burner	_
	C	Pilot Burner Plug	_
	D	Pilot Burner Vent pipe	_
	E	Pilot Burner Cover	_
	F	Pilot Burner Fedd pipe	_
11275		Spark Arrester for Rebuilt Loco no.6310	9.7.29
11276		Drilling in Cross Members for Control Rods, geared car	26.7.29
11277		Arrangement and Detail of box van body fitted with rear lock-up doors	11.7.29
11278		Chain Guard, BE Loco	29.7.29
11279	A	Cylinder Head Cover, 6 3/4" x7" six cylinder engine	11.7.29
	B	Valve Gear Cover	_
	C/D	Arrangement of Extension Funnel and Stop Ring	_
11280	A	Cover plate	11.7.29
	B	Socket Plate -(accumulator box)	_
	C	Pulley Bracket Distance-piece	_
	D	Protection Plate - dynamo chain	_
	E/F	Bunker Packing Piece	_
11281
11282	A	Exhaust Pipe End Flange	17.7.29
	B	Steam Pipe End Flange	_
	C	Steam Flange	_
	D	Bearing for reversing Control Shaft	_
	E	Exhaust Pipe Flange	_
	F	Superheater Elbow Blank Flange	_
11283	A	Arrangement of Headboard of Body with 20" hinged sides, headboard flush with corner angles	13.7.29
	B/C	Platform Front Corner Angle	_
	D	Body Side Stanchion	_
	E	Body Centre Partition	_
	F	Centre partition Fixing Channel	_
11284		Proposed Arrangement of "Setninel DG6" waggon for carrying Packing cases	13.7.29
11285	A	Special Drlling in side Bulb angles and centre Channels in Platform drg no. SB2167	15.7.29
	B/C	Longitudinal Beam Stiffening Angle	_
	D/E	Tool Box Band	_
	F/G	Trailor Side channel	_
11286	A	Snifting Valve Piston	13.7.29
	B	Snifting Valve	_
	C	Cap for combined Ex. Bend and Snifting Valve Body	_
	D	Piston Rod	_
	E	Combined Exhaust Bend and Snifting Valve Body	_
11287		Water Tank, geared car	15.7.29
11288		Arrangement and Detail of frame for DG4 Three Way Tipping Waggon	13.9.29
11289	A	Steam Pipe, 6 3/4"x 7" six cylinder engine, CANCELLED - 1.5.30	17.7.29
	B	Expansion Joint Staem Pipe, CANCELLED 1.5.30	_
	C	Expansion Joint Housing, cancelled 1.5.30	_
	D	Expansion Joint Gland	_
11290		Body Builders Arrangement of Standard 21' - 0' platform as fitted to Super Sentinel Rigid Six Wheel Waggon	17.7.29
11291	A	Tail lamp Bracket, CAV Lighting Set	16.7.29
	B	Engine Protection Plate(rear)	_
	C	Arrangement showing Special Drilling in DG6 frame for engine	_
	D	Engine Protection Plate(front)	_
	E/F	Tank Stop Angle	_
	G/J/K	Side Tank Adjusting Block	_
	H	Arrangement and details of fixing reare Number plate and Tail lamp	_
11292	A/B	Steam Valve Cam(automatic snifting valve)	17.7.29
	C	Steam Valve (automatic snifting valve)	_
	D	Steam valve Body	_
	E	Steam Valve cap	_
	F	Steam Valve Gland	_
	G	Arrangement of Steam valve for combined exh. Bend and snifting valve	_
11293		Arrangement of Dynamo and Accumulators for BE Loco	18.7.29
11294	A	Arrangement of Tailboard Catch Opening Lever	18.7.29
	B/J	Tailboard Catch opening Lever	_
	C	Fulcrum Bracket	_
	D	Lever Holding Socket	_
	E	Bunker Side Support	_
	F/G	Front Mudguard Support	_
	H	Support Socket	_
11295		Sentinel Patent Water Tube Boiler	2.9.29
11296	A	Arrangement of Headboard of body with 24"hinged sides and 8" fixed extensions	19.7.29
	B/C	Platform Rear Corner Angle	_
	D/E	Platform Front Corner Angle	_
	F	Tailboard Support Arm(end)	_
11297		DG6 Side Tipper(sides hinged in 3 pieces and hinged tailboard), Details of Tipping Platform	19.7.29
11298	A/B	Steering Coupling Rod End
	C	Dust Cover for Coupling Rod End	_
	D	Pin for Coupling Rod End	_
	E	Coupling Rod End Bush	_
	F	Steering Coupling Rod	_
11299		Front Lower panel - 11299A Panel Assembly	22.7.29
11300		Proposed Arrangement of Box van fitted to 'Sentinel' DG4 waggon	22.7.29
11301		Arrangement of Westinghouse Air Compressor, geared car	23.7.29
11302		DG6 Side Tipper, 3 Compartent body with 28' sides and 28' hinged tailboard	22.7.29
11303		Arrangement of Boiler showing position of fittings DG tractor	23.7.29
11304	A	Front Buffer Beam	24.7.29
	B	Rear Buffer Beam	_
	C	Front Headstock Bottom Angle	_
	D/E	Rear Buffer Beam Stiffening Channel	_
	F/G	Front Buffer Beam Stiffening channel	_
	H	Front Buffer Beam Stiffening angle(centre piece)	_
11305	A	Centre tank Connection	24.7.29
	B	Side Tank Connection	_
	C	Tank Strap	_
	D	Tank Tie Strap	_
	E	Tank Tie Bar	_
	F	Tank Susepension Channel	_
	G/H	Hose Carrying Bracket	_
11306		Pull Rod Guide Block	24.7.29
	C	Pull Rod Guide Block Cover plate	_
	D	Gresley Bogie Headstock Guide Block	_
	E	Reducing Valve Bracket	_
	F	Reducing Valve Clip Bolt	_
		Reversing Control Rod, Tank End	_
11307	A/B	Front Buffer Beam Stiffening Angle	25.7.29
	C/D	Rear Buffer Beam Stiffening Angle	_
	E	Rear Headstock Bottom angle	_
	F	Headlamp Bracket	_
	H	Headlamp Bracket	_
	J	Rear Buffer Beam Stiffening Angle - centre piece	_
	K	Rocking Grate Bottom Pull Rod	_
	L	Oil Fuel Tank Strap	_
11308		Arrangement of Buffer Beams and Cowcatcher, CE Loco	24.7.29
11309		Auxiliary Coal Bunker	6.9.29
11310		Water Tank, Capacity 60 gallons	24.7.29
11311		Arrangement of Control Rods in Underframe -geared car	26.7.29
11312	A	Boiler Plain Tubes	30.9.29
	B	Boiler plain Tubes	_
	C	Boiler Stay Tubes	_
	D/K	2 5/8 % Boiler Stay Tubes	_
	E/J	2 3/4 % Boiler Plain Tubes	_
	F	1 3/4% Special Swelled Ended tubes	_
	G	2 1/2' Boiler Stay Tubes	_
	H	Special Stay tube	_
11313		Arrangement of Auxiliary feed Water Tank Bunker and Special Drilling in DG6 frame	26.7.29
11314		Water Tank 300 gallon capacity	8.8.29
11315		Steam Pipe Flange Joint, 6 3/4' x 7' six cylinder engine	26.7.29
11316		Arrangement of BE Loco - 8 ton, 6or4 wheel with jackshaft - 2ft gauge	29.10.29
11317		Arrangement of Cowcatcher, CE Loco	29.7.28
11318	A	Centre Partition	3.9.29
	B	Tailboard and Side Front End Protection Plates	_
	C	Side Rear End Cover Plates	_
	D	Fixed Side Supports	_
	E	Tailboard Hinge	_
11319		Arrangement of Blower Valve Pipe - collector box to valve	26.7.29
11320	A	Piston Rod	29.7.29
	B	Stuffing Box Scraper	_
	C	Stuffing Box Gland Ring	_
	D	Stuffing Box	_
	E	Crosshead Scraper Ring	_
11321	A	Inner Funnel, geared car	29.7.29
	B/G	Funnel Outer Casing	_
	C	Funnel Cowl Support Angle	_
	D	Funnel Cowl Front Top Plate	_
	E	Funnel Cowl Rear Top Plate	_
	F	Extension Funnel	_
11322		Arrangement of Funnel	11.9.29
11323	A	Arrangement of Kitbox	30.7.29
	B	Kit Box Band	_
11324		Arrangement of Superheater Coils - Oil Fired and Bengal Boilers, geared cars	6.8.29
11325		Superheater Coil - Outer	30.7.29
11326		Superheater Coil - Inner, geared car	30.7.29
11327		Boiler Top Plate, geared car	10.9.29
11328		Boiler Top Plate, geared railcar	31.7.29
11329		Thimble Tube	31.7.29
11330	A	Arrangement of Headboard of DG6T body with 28" hinged sides and 8" fixed extensions	31.7.29
	B/C	Platform Front Corner Angle	_
	D/E	Platform Rear Corner angle	_
	F	Detail of Drilling in bottom of Rear End of Centre Water Tank for Tank Connections	_
	G	Saddle Tank Connection Blank	_
11331	A	Front Tarpaulin Bow	31.7.29
	B	Tarpaulin Bow Socket	_
	C	Tarpaulin Bow leg	_
	D	Rear Cross Chain	_
	E	Rear Mudguards Support(rear end)	_
11332		Geared Car Oil Fuel Boiler	4.7.30
11333
11334	A,etc	Sanding Rod End
		Sandbox Connecting Rod	_
	E, etc	Sandbox Connecting Rod	_
	F/G	Bracket for Speed Indication plate	_
	H	Sandbox Connecting Rod	_
11335		Sentinel Patent Water Tube Boiler
11336
11337	A	Steam Drying -coil, geared car	1.8.29
	B	Superheater Steady Plate LH	_
	C	Superheater Steady Plate RH	_
	D	Rocking lever Connecting Link	_
	E	Firegrate Lifting lever	_
11338	A	Superheater Top Dog, geared car	2.8.29
	B/F	Superheater Packing piece	_
	C	Superheater Bottom Dog	_
	D	Superheater Bottom Dog	_
	E/G/H	Superheater Baffle plate	_
11339		Arrangement of Springs Axle Boxes etc	18.9.29
11340		Rear Lower Panel - Panel Assembly 11340A	27.8.29
11341		Wheel Tractor Frame - non winch type	2.8.29
11342		Arrangement of Firegrate and Ashapan gear, L&NER Railcoach Conversion	4.11.29
11343	A	Fixed Side Support	3.8.29
	B	End Cross Bearer Special Bracket	_
	C	Special Cross Bearer Bracket	_
	D/E	Apron Plate Protector Stay	_
	F	Tailboard Stop Bracket	_
11344	A/B	Drawbar Channel Carrying Plate	2.8.29
	C	Frame Rear Top Gusset	_
	D	Fraem front Cross Channel	_
	E	Rear Cross Channel	_
	H/F	Rear Centre Drawbar Pin	_
	G	Rear Centre Drawbar Bracket Plate	_
11345	A	Superheater Coil Adapter	3.8.29
	B	1" x 1 3/4" Coupling Nipple	_
	C	Special Injector Valve	_
	D	Special Injector Valve Seat	_
	E	Weir' pump needle Valve	_
	F	Weir' Pump Valve Stuffing Box	_
	G/J	Weir' Pump Valve Spindle	_
		Reducing Valve Nipple	_
11346	A	Canopy Angle Bearer	3.8.29
	B	Angle Bearer Washer Plate	_
11347		Wheel Tractor Frame - winch type	6.8.29
11348		Arrangement of Combined Hand and Air Brake for HCE Loco	6.9.29
11349	A/B	Rear Side Cover Plate	8.8.29
	C/D	Front Side Cover Plate	_
	E	Front Cover plate	_
	F	Front Side Bar	_
	G	Rear Side Bar	_
11350		Detail of Drilling in Platform of Super sentinel Six Wheeler with special hinged sides and tailboard	7.8.29
11351		Arrangement of Rear Axle, DG tractor
11352	A	Tailboard End Cover Plate	5.9.29
	B	Rear Side Rear Cover Plate	_
	C	Rear Side Front Cover Plate	_
	D	Front Side Rear Cover Plate	_
	E	Front Side Front Cover Plate	_
	F	Headboard End Cover Plate	_
	G	Fixed Headboard Supports	_
	H	Front Side Hinge	_
11353		Arrangement of Springs, Spring Brackets and Axle Boxes, CEDG type loco	3.6.30
11354	A	Rear Corner Plate(top)	8.8.29
	B	Roof Cross Beam Support	_
	C	Front and Rear Corner Plate	_
	E	Rear Door Locking Bolt	_
	F	Roof Cross Beam Stiffener	_
	G	Foot Support	_
	H	Tailboard Protection Plate	_
	J	Catch Bracket Bolts	_
11355	A/B	Tailboard Hinges	13.8.29
	C	Body Side Stiffener(top)	_
	D	Cope Bar	_
	E/F	Platform Rear Corner Angle	_
	G	Body Side Stiffener	_
11356		Detail of Rigid Six Wheeler Frame	7.9.29
11357
11358		Arrangement of Winch Roller Gear, DG Tractor	8.8.29
11359	A	Vertical Roller Stay	9.8.29
	B/C	Top Horizontal Roller Bracket	_
	D	Rear Cross Channel(winch type)	_
	E/F/G	Roller	_
	H	Horizontal Roller Bracket(bottom)	_
	J/K	Rear Top Gusset Plate	_
	L	Rear Spring Packing Stud	_
11360		Tractor Rear Wheel	12.8.29
11361		Tractor Rear Wheel	12.8.29
11362		Tractor Front Wheel	12.8.29
11363		Arrangement showing Holes in Footplate	13.8.29
11364		Sentinel Patent Water Tube Boiler
11365		Arrangement of Front Axle and Steering for DG8 waggon	15.8.29
11366	A	Whistle Pillar
	B	Whistle Gong	_
	C	Whistle Gong Distance Piece	_
11367		Arrangement of Cab Canopy and Bunkers	16.8.29
11368
11369	A	Arrangement of Workshop Body Side Support	28.8.29
	B	Side Support Angle	_
	C	Body Side Support	_
	E	Support Channel for Tilt Van	_
11370	A	Front End Hopper Support	15.8.29
	B/E	Hopper Support A	_
	C	Hopper Support B	_
	D	Hopper Support C	_
11371		Water Tank, geared car	9.9.29
11372		Arrangement of Drawers and Shelves for Strong Room	29.8.29
11373
11374	A	Front and Rear Angle Curbs	30.8.29
	C	Details of Tarpaulin Roller	_
	D	Tarpaulin Cover	_
	E	Wood Rails for Opening in Top of Hopper Body	_
11375		Drilling in Cross Memers for Control Rods, geared car	26.7.29
11376		Arrangement of Control Rods in Underframe(geared car)	4.9.29
11377	A	Wood rail for tarpaulin Bows	2.9.29
	B	Chute Door	_
	C	Chute Door Slide	_
	D	Chute Door Stop	_
	E	Front Corner Angle	_
	F	Rear Corner Angle	_
	G	Grain Chute	_
	H	Wood Rail for Front and Rear angle curbs	_
11378	A	Tarpaulin Bows	3.9.29
	B	Wood for carrying Chute Door Slide	_
	C	Gusset Stays	_
	E/F	Accumulator Base Board	_
11379		Arrangement of Hopper Body for DG6 to carry Grain	3.9.29
11380	A/B	Front Corner Plate	4.9.29
	C/D	Rear Corner Plate	_
	E	Side rail Angle	_
	F	Front Rail Angle	_
	G	Skid bar	_
	H	Platform Corner Gusset	_
	J	Tail Rail Catch Plate	_
11381	A	B' nameplate,Machined and Polished on Face	4.9.29
	B	L' nameplate, Machined and Polished on Face	_
	C	R' nameplate, Machined and Polished on Face	_
	D	D' nameplate, Machined and Polished on face	_
	E	2' nameplate, Machined and Polished on face	_
	F/G	Gauge board	_
11382
11383	A	Side and tailboard Hinge	9.9.29
	C	Side Stanchion(short)	_
	D	Side Stanchion(long)	_
	E	Cope bar(long)	_
	F	Cope Bar(short)	_
	G	Roping Ring	_
	H	Inside protection Plate	_
11384	A	Inner Funnel, geared car oilfired boiler	6.9.29
	B	Funnel Cowl Wrapper Plate	_
	C	Funnel Cowl Wrapper angle	_
11385		Reversing Control Rod	6.9.29
		Control Rod	_
		Control Rod	_
		Control Cross-over Shaft	_
11386		Funnel Base, geared car	9.9.29
11387	A	Tank Filler Joint	28.4.37
	B	Tank Sump Joint	_
	C	Funnel Base joint - to suit base 11386A	_
	D	Strainer Plate Joint	_
	E	Tank Strainer plate	_
	F	Tank Strainer Plate	_
	G	Strainer Plate Joint	_
11388		Steam and Vacuum Brake Arrangement	12.9.29
11389	A	Combined Blast and Blower Pipe, geared car	10.9.29
	B	Blower Pipe Nipple	_
	C	Bracket for Oil Control valve	_
	D/F/G	Control Rod Jaw	_
	E/H	Cleaning Valve Bracket	_
11390	A	Arrangement of Tank Filling Hole Cover, DG6 waggon	9.9.29
	B	Tank Filler Hole Cover	_
	C	Peg	_
	D	Fixed caster Pulley Braceket	_
	E	Fixed caster Pulley	_
	F	Caster Pulley Pin	_
	G	Tailboard Stop bracket Plate	_
	H	Arrangement of Drilling in Rear Cross Channel for tailboard Stop Bracket	_
11391	A	Side chain Stanchion	10.9.29
	B	Rear Chain Stanchion	_
	C	Chain Stanchion Socket	_
	D	Cross Chain Hook	_
	E	Tail rail Cope Bar	_
11392	A	Arrangement of Headboard of Body with Special 40 1/4" sides for DG6 tipper	11.9.29
	B/C	Platform Front Corner Angle	_
	D/E	Platform Rear Corner Angle	_
	F	Tailboard and Side Extension Socket	_
	G	Body Side Stanchion	_
11393		Arrangement of Control Rods in Underframe, 200HP articulated geared car - woolnough boiler	1.10.29
11394
11395	A	Name board Support bracket	17.9.29
	B	Name board Support	_
	C	Support Bracket Pin	_
	D	Name Board Protection Plate(rear)	_
	E/F	Name Board Protection Plate(front)	_
	G/H	Name Board Protection Plate(front centre)	_
	J/K	Name Board Protection Plate(rear centre)	_
	L/M	Name Board Protection Plate(rear side)	_
11396	A	Boiler Top Cover, geared car oil fired boiler	14.9.29
	B	Boiler Top Cover Angle Ring	_
11397		Boiler Shell showing Position of Mountings	17.9.29
11398		Drilling in Cross Memebers for Control Rods, articulated geared car	2.10.29
11399		Arrangement of Extra Bunker fitted to DG6 waggon	17.9.29
11400		Sentinel Patent Water Tube Boiler	18.9.29
11401		Arrangement of Extra Bunker fitted to DG6 waggon	18.9.29
11402	A	Combustion Chamber Bottom Plate	19.9.29
	B	Combustion Chamber Top Plate	_
	C	Combustion Chamber Bracket	_
	D	Combustion Chamber Cleat	_
11403	A/P	Arrangement of Headboard fitted to Standard 15'-3' x 6'x6' trailor platform	20.9.29
	B/C/M/L	Headboard Support	_
	D	Headboard Stay	_
	E/J	Headboard Outside Cope bar	_
	K/F	Headboard Inside centre Cope bar	_
	N/G	Headboard Outside Centre Cope bar	_
	H	Body Side Stanchion	_
11404		Arrangement of 200HP gear railcar, fitted with woolnouh type boiler	19.9.29
11405		Arrangement showing Holes in Footplate, geared car	20.9.29
11405 A		Arrangement showing Holes in Footplate, geared car	20.9.29
11406		Oil Fuel Combustion Chamber	20.9.29
11407		Arrangement of Rocking Firegrate for 25% LTS CE Loco	24.9.29
11408	A	Canopy Rack Knee	23.9.29
	B	Side extension Bracket	_
	C	Extension Support	_
	D	Extension Support Washer Plate, CANCELLED - never used 27.9.29	_
	E	Tarpaulin Bows	_
	F	Front Angle Bow	_
11409	A	Auxiliary Bunker	24.10.29
	B	Steps for Drawing Safe	_
	C	5" DIAr Pulley	_
	D	Pulley Bracket	_
	E	Pulley Axle Rod	_
	F	Pawl	_
11410		Arrangement of Canopy Rack	24.9.29
11411	A	Arrangement of Headboard of DG6T Body with 20" hinged sides x 8" fixed Extension	25.9.29
	B/C	Platform Rear Corner Angle	_
	D/E	Platform Front Corner angle	_
	F	Body Side Stanchion	_
	G	Whistle Plate	_
11412		Arrangement of DG4 15"-3" chassis	25.9.29
11413		Drilling in Footplate at Articulated Bogie, for dual control gear, articulated gear car	25.9.29
11414		Rocking Grate and Ashpan Brackets for 25% LTS Boiler CE Loco	25.9.29
11415
11416	A	Arrangement of Cab Canopy and Bunker	26.9.29
	B	Bunker Front Cope Iron	_
	C	Grease Gun Support	_
	D	Rear Footplate Support	_
11417		Boiler Baffle Plate	17.16.29
	Y	Funnel Outer Casing	_
11418	A	Side Extension Socket	1.10.29
	B	Tarpaulin Bow Socket	_
	C	Side Rear End Cover Plate	_
	D	Rear Side Catch	_
	E	Rear Tarpaulin Bow	_
	F	Detail of tarpaulin Cover	_
11419	A	Steam Drying Coil, oil fired waggon boiler	30.9.29
	B/C	Steam Drying Coil Clip	_
	D	Steam Drying Coil Support	_
	E	Baffle Plate	_
	F	Sight Tube Top Plate	_
	G	Sight Tube	_
	H	Arrangement of Sight Tube and Drying Coil	_
11420	A	Arrangement of Headboard of DG6 side tipping body with 20" hinged sides and 22" fixed extensions	3.10.29
	B/C	Platform Front Corner Angle	_
	D/E	Platform Rear Corner angle	_
	F	Partition	_
11421		Arrangement and Detail of Frame for DG6 Overseas Type Waggon	1.10.29
11422	A	Tailboard End Protection Plate	7.10.29
	B/C	Side Extension Support angle	_
	D	Fixed tailboard Supports	_
	E	Cope Bar	_
	F	Tailboard Stop	_
	G	Tailboard Cope bar, CANCELLED 7.10.29	_
	H	Tailboard Stop Bracket	_
11423		Packing Plate	2.11.29
11424		Arrangement of DG4 Chassis fitted with 1000gallon Tank to carry Tar	3.10.29
11425		Furnace Door Arrangement	5.10.29
11426	A	Steering Gear Casing	3.10.29
	B	Steering Drag Link	_
	C	Hand Brake Forward Rod	_
	D	Reversing Gear Rod	_
	E	Gear Change Rod	_
11427		Front and Rear Footplate, overseas DG6 waggon	4.10.29
11428		Pipe Arrangement for CEDG Loco	4.10.29
11429	A	Furnace Door Damper, MCI	5.10.29
	B/C	Furnace Door Plate	_
	D	Furnace Door Plate, bengal Rl Coach Boiler	_
	E	Furnace Door Plate	_
	G/F	Furnace Door Baffle Plate	_
11430	A	Tailboard Hinge	7.10.29
	B	Tailboard Centre Washer Plate	_
	C	Tailboard Outside Washer plate	_
	D	Platform Front Corner Angle	_
	E	Platform Rear Corner angle	_
	F	Tailboard End Cover Plate	_
	G	Side Cover Plate	_
	H	Tipping Side Hinge Bar	_
11431		Arrangement of Oil Fuel Gear, DG6 overseas waggon	25.10.29
11432	A	Special Drilling in Centre Side Channels and rear Cross Channel in Tipping Platform	5.10.29
	B	Rear Drawbar Stiffening Bracket	_
	C/D	Rear Lamp Bracket Stiffening Angle	_
	E/F	Front lamp Bracket Stiffening angle	_
	G	Hose Pipe Connection Support	_
	H	Boiler Cleaning Lance	_
11433	A	Arrangement of Body Side Catch	5.10.29
	B	Catch Bracket	_
	C/D	Side Catch	_
	E	Catch Handle	_
	F	Catch Bolt	_
	G/H	Rear Corner Plate	_
	J	Support Knee	_
	K	Rear Corner Plates(top)	_
11434		Tilt Runaway	7.10.29
11435	A	Arrangement of Three way tipper body Front End	7.10.29
	B	Detail of Drilling in tailboard for tail Lamp Bracket	_
	C/D	Air Compressor Holding Channel	_
	E	Holding Cahnnel Packing Piece	_
	F	Section of DG4 Frame showing Extra Drilling	_
11436		arrangement of DG6 side Tipping Waggon three Compartment body with 20" hinged sides, 22" fixed extensions and 3'-6' fixed tailboard	9.10.29
11437
11438	A	Special Drilling in DG6 T Water Tank	10.10.29
	B	Water Heater Flange	_
	C	Feed Water Heater Flange(outer)	_
	D	Foot Rest	_
	E	Arrangement and Detail of Tank Carrying Boards	_
11439	A	Oil Heating Pipe	8.10.29
	B	Oil Tank Support	_
	C/D	Top R&L Hand Angle Forging	_
	E/F	Bottom - R&L Hand Angle Forging	_
	G	Oil Tank Support	_
	H	Tank Strap	_
		Tank Suspension Bolt	_
11440		Arrangement of Body with sliding Tilt fitted to DG4 waggon	9.10.29
11441	A	Skid Bar(outside)	9.10.29
	B	Skid Bar(centre)	_
	C/D	Front Corner Angle	_
11442		Boiler Shell showing Position of mountings	9.10.29
11443		Oil Tank(capacity 118 galls) for DG6 overseas wagon	9.10.29
11444	A/B	Compressor Foundation Block	12.10.29
	C/D	Compressor Fixing Bracket(end)	_
	E	Compressor Fixing Bracket(centre)	_
	F/G/N	Comr Fixing Stud(inner and outer)	_
	H/J	Special bearers	_
	K	Steam Pipe Adapter Flange	_
	L	Exhaust Pipe Adapter Flange	_
	M	Rear Bow Tie Bar	_
11445	A	Light Oil Tank for Pilot and Main Burners(7 3/4 galls capacity)	14.10.29
	B	Trap Door Side Support	_
	C	Trap Door End Support	_
	D	Roof Cover Plate	_
	E	Burner Valve Support Bracket	_
11446		Chain Lubricator Box	17.10.29
11447	A	Arrangement showing fitting of Air Compressor on DG4 waggon	15.10.29
	B	Detail of Extra Drilling in DG4(15'-3') frame for tank	_
	C	Arrangement of Nameboard	_
11448	A	Arrangement of Trailor Brake Lever(for 10 ton trailor)
	B	Hand brake Lever	_
	C	Trailor Brake Ratchet(10 ton trailor)	_
	D	Draw Bar Bolt Eye Bolt(10 ton Trailor)	_
	E	Eye Bolt Bolster(10 ton trailor)	_
	F	Arrangement 10 ton trailor Brake gear modification	_
11449		Arrangement of Compressor Bed on Workshop Body platform	15.10.29
11450	A	Bunker Front Support Angle	18.10.29
	B	Cab Back Support Angle	_
	C	Foot Rest Support Distance Piece	_
	D	Curtain Rod	_
	E	Canopy Side Curtains	_
	F	Foot pump Cover Plate	_
11451	A	Chain Lubricator Box Lid
	B	Chain Lubricator Nipple Plate	_
	C	Chain Lubricator Back Plate	_
	D	Stop Valve Extension Spindle Guide	_
	E	Vacuum Weighshaft Bracket, railcoach	_
	F	Vacuum Pull Rod	_
	G	Lubricator Support Bracket	_
11452	A/B	Oil Heater Support Bracket	21.10.29
	C/D/E	Oil Filter Clip - plate and block	_
	F	Arrangement of Light Oil Tank Filler	_
	G	Oil Filler cap	_
	H	Oil Filter Flange	_
	J	Roof Cover Block	_
	K	Oil Filter Support	_
	L	Oil Filter Extension Pipe	_
11453
11454		Development of Boiler Shell, boiler drawing10703, SI Loco - 11 ton	21.10.29
11455		Proposed Arrangement showing Drive for "Reavell" R 3 3/4"x 5" Rotary Compressor for "Sentinel" DG6 waggon	18.10.29
11456
11457	A	Tank Strap	18.10.29
	B	Floorside Rail	_
	C/D	Side catch Bracket	_
	E	Drivers Cushion Retaining Plate	_
	G	Tailboard Outside Washer Plate	_
	F	Side catch Bracket	_
11458
11459	A	Body Side Hinge	5.11.29
	B/C	Side End Protection Plate	_
	D	Tailboard Support Arm	_
	E	Tailboard Support Arm Bracket	_
	F	Special Detachable Stanchion	_
	G/H	Side rear Support Arm	_
11460	A	Oil Tank Filler Lif Setscrew	26.10.29
	B	Bearing Plate Screw	_
	C/L	Stop valve Gland Set Pin	_
	D	Coupling Rod Bush Set Screw	_
	G/F/F	Boiler Set Pin - TRANSFERRED??	_
	H	Front Axle Trunnion Stop	_
	J	Steering Bracket Cap Stud	_
	K	Spare Wheel Securing Set Pin	_
11461	A/C	Arrangement of Chain Lubricator, loco's double feed type	21.10.29
	B/D	Arrangement of Chain Lubricator, waggon type (single feed)	_
11462		Body Builders Arrangement of 21'-0' platform fitted to DG6 waggon	22.10.29
11463		Arrangement of DG6 Side Tipping Waggon Frame	24.10.29
11464		Arrangement of Cab and Canopy	5.11.29
11465		Frame Stiffening Plate(inside LH)	25.10.29
11466	A	25 Teeth Sprocket Ring	25.10.29
	B	Control Lever Quadrant Bracket	_
	C/H	Quadrant Plate	_
	D	Sand Spindle Bush	_
	E	Sand valve	_
	F	Sand valve Spindle	_
	G	Cross Shaft Bracket	_
11467		Arrangement of Crossbar, L&NER conversion	31.10.29
11468		Frame Stiffening Plate(outside)	25.10.29
11469		Arrangement Wheels and Axle - front, LNER Railcar conversion - 13E	30.10.29
11470		Arrangement of Firegrate and Ashpan gear	28.10.29
11471	A	25 tooth Wheel Sprocket	29.10.29
	B	25 tooth Wheel Sprocket	_
11472		Arrangement of Front Bunker, LNER railcoach conversion	29.10.29
11473	A	Arrangement of Detachable Funnel Extension	29.10.29
	B	Funnel Extension	_
	C	Funnel Extension Ring	_
	D	Tailboard Protection Plate	_
	E	Skid Bar	_
11474
11475	A	Arrangement of Headboard of DG6 Side Tipping body with 12" hinged side and 12" hinged extensions	4.11.29
	B/C	Platform Front Corner angle	_
	D/E	Platform Rear Corner angle	_
	F	Body Side stanchion	_
	G	Rear Side Stop Bracket	_
11476		Proposed Arrangement showing Drive for "Boreas" patent Air Compressor (size NY3) fitted to Sentinel DG6 waggon	5.10.29
11476 2nd		Arrangement of Chain Drive for "Boreas" Patent Air Compressor(size NY 3) fitted to "Sentinel" DG6 waggon	22.11.29
11477		Arrangement of 15' -3' x7' x 0 3/4' platform	31.10.29
11478	A	Steam Waggon Name Plate
	B	Steam Tractor Name Plate
11479	A	Tailboard Rest Channel	6.11.29
	B	Body Side Rest Channel	_
	C	Support Arm Cotter Bolt	_
	D	Tailboard Inner Hinge	_
	E	Hose Carrying Bracket Stay	_
	F/J	Roping Hook	_
	G	Clutch Operating Spindle Peg	_
	H	Fire Pricker Hook	_
11480		DG6 Side Tipper - platform frame	6.11.29
11481		Exhaust Pipe - feedheater to funnel	7.11.29
11482	A	Instruction Plate(spanish wording)
	B	Spanish Wording for Tank Graduations
	C	Oil Heater Nameplate
	D	Indicator Plate Heavy Oil
	E	Indicator Plate Light Oil
	F	Brake Nameplate
	H	Steam Brake Nameplate
	K	Engine Oil Pump Nameplate
	M	Woolnough Boiler Nameplate
	P	Moorlands Pump Regulator valve nameplate
	G	Engine Oil Pump Nameplate
	J	Reversing Quadrant index plate
	L	Vac. Brake Valve nameplate
	N	Pump Stop Valve nameplate
	Q	Moorlands Pump Regulator valve nameplate
11483		Arrangement of Body of DG6 Side Tipping Waggon with 12" hinged sides, 12" hinged extensions and 24" hinged tailboard	9.11.29
11484	A	Clutch Shaft Sleeve	4.12.29
	B	Crankshaft Extension Nut	_
	C	Compressor Drive Clutch	_
	D	Ballrace Thrust Collar	_
	E	Ball Bearing Inner Washer	_
	F	Ball Bearing Outer Washer	_
	G	Driving Clutch Pinion	_
11485
11486		Arrangement of Vacuum Control Gear - power unit end	11.11.29
11487	A	Vacuum Control Lever, railcoach	11.11.29
	B	Vacuum Weugh-shaft lever	_
	C	Vacuum Weigh-shaft	_
	D	Vacuum Weigh-shaft index plate	_
	E	Sanding Lever	_
	F	Sanding Lever-inside	_
	G/J	Sanding gear Hand Lever	_
	H	Direction Change Lever	_
11488		Washer Joint	12.11.29
	B/C/D/E/F/N	Boiler Top Plate Joint	_
	G	Tank Manhole Joint	_
	H	Oil Filler Body Joint	_
	J	Sandbox Filler Joint	_
	L	Tank Filler Joint	_
	K	Tank Filler joint	_
	M	Tank Filler Drum Cover joint - NEVER USED 28.4.32	_
11489	A/B	Ballast Weight	12.11.29
	C	Lighting Up Burner Support Tube	_
	D	Buffer Bridle	_
	E	Bridle Plate, CANCELLED 12.9.30	_
	F	Footstep Bracket	_
	G	Footstep Bracket Support	_
		Sanding Hand lever	_
11490	A/B	Platform Front Corner angle	15.11.29
	C/D	Platform Rear Corner angle	_
	E/F	Side extension	_
	G	Extension Washer Plate	_
	H	Arrangement of DG4 Tipping waggon body with 28" hinged sides, 8" Detachable extensions and 36" hinged tailboard	_
	J	Dynamo Support Bracket	_
11491		Arrangement of Sanding gear - RH box, railcoach conversion	18.11.29
11492		Arrangement of Shed with Open ends for DG6T waggon(hibberts)	18.11.29
11493	A	Support Channel for Tilt van	18.11.29
	B	Support Angle for Tilt van	_
	C	Locking bolt	_
11494		Arrangement of Firegrate and Ashpan Lifting Gear, LNER Crane Loco	10.12.29
11495		Arrangement of Water Tank's and Bunkers, 8'-0' wide car	28.11.29
11496		Water Tank	19.11.29
11497	A/P	Coal Bunker	19.11.29
	R/S	Toolbox	_
	Q	Bottom Plate	_
11498	A/B	Internal Suction pipe	20.11.29
	C/D	Tank Packing piece	_
	E	Bunker Packing piece - outer	_
	F	Bunker packing - inner	_
	G	Bunker Packing piece - front	_
11499	A	Arrangement of Coaling Chute	28.11.29
	B/C	Bottom Panel	_
	D/E/F	Top Panel	_
	G/H/J/K/L/M	Front Panel	_
	N/P/Q/R/S/T/U	Rear panels	_
		Guide panel	_
11500		Arrangement of Frame - LNER car12E	5.12.29